Strategy to mitigate single event upset in 14-nm CMOS bulk FinFET technology

Three-dimensional (3D) TCAD simulations demonstrate that reducing the distance between the well boundary and N-channel metal-oxide semiconductor (NMOS) transistor or P-channel metal-oxide semiconductor (PMOS) transistor can mitigate the cross section of single event upset (SEU) in 14-nm complementary metal-oxide semiconductor (CMOS) bulk FinFET technology. The competition of charge collection between well boundary and sensitive nodes, the enhanced restoring currents and the change of bipolar effect are responsible for the decrease of SEU cross section. Unlike dual-interlock cell (DICE) design, this approach is more effective under heavy ion irradiation of higher LET, in the presence of enough taps to ensure the rapid recovery of well potential. Besides, the feasibility of this method and its effectiveness with feature size scaling down are discussed.     

配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

双侧下颌支矢状劈开截骨术后患者可施加合适咬合力的数值研究

双侧下颌支矢状劈开截骨术在临床手术中广泛用于治疗缩颌、凸颌和颌面不对称患者的颌面畸形症状。本文用数值方法研究双侧下颌支矢状劈开截骨术并前移下颌骨后患者可施加的合适咬合力。首先，用缩颌患者的CT断层扫面数据建立下颌骨、关节盘、关节窝和相关软组织的高度几何相似性的几何模型；然后，用有限元模型模拟双侧下颌支矢状劈开截骨术后患者的咬合过程。通过分析发现，术后关节盘上的位移处于正常的范围，而应力却远远超过正常范围，因此，将应力因素作为确定术后患者可施加的合适咬合力的标准。当施加正常咬合力的25%时，关节盘上的应力分布和术前没有显著性差异，同时下颌骨上的应力水平也处于正常范围。     

Large eddy simulation of serration effects on an ultra-high-bypass-ratio engine exhaust jet

Serrated jet nozzles are considered to be an efficient and practical passive control approach for jet noise. However, some fundamental mechanisms of serration effects on jet noise are not fully understood, especially in terms of the sound source. In this paper, a high-fidelity simulation framework using large-eddy simulation (LES) is demonstrated to predict near-field turbulence and far-field acoustics from an ultra-high-bypass-ratio engine with round and serrated nozzles. Far-field sound is predicted using Ffowcs Willams–Hawkings (FWH) integration. The results show that the serrated nozzle increases mixing near the nozzle and hence the turbulence decay rate, reducing the turbulence level downstream. The serrations shift the energy from the low frequencies to the high frequencies and decrease overall sound pressure levels by about 3 dB over the low-frequency range. Sound sources are analysed based on fourth-order space–time correlations. There are six major source components ($R_{1111}$, $R_{2222}$, $R_{3333}$, $R_{1313}$, $R_{1212}$, and $R_{2323}$) inside the jet shear layers. The serrations are able to reduce the amplitude of these source terms, causing them to decay rapidly to a level below the round nozzle jet within 2D downstream of the nozzle.     

考虑剪切效应的旋转FGM楔形梁刚柔耦合动力学建模与仿真

本文对一类中心刚体-柔性梁系统在大范围转动下的刚柔耦合动力学问题进行了研究. 柔性梁为功能梯度材料(functionally graded materials, FGM)楔形变截面梁,材料体积分数在梁轴向呈幂律分布变化. 以弧长坐标来描述柔性FGM梁的几何位移关系,分别使用倾角和拉伸应变变量描述柔性梁的横向弯曲和纵向拉伸变形,并计及剪切效应. 采用假设模态法离散变形场,运用第二类拉格朗日方程进行方程推导,得到系统考虑剪切效应的刚柔耦合动力学模型. 基于全新的刚柔耦合动力学建模理论,研究不同轴向材料梯度分布的FGM楔形梁,通过数值仿真计算,分析讨论不同的转速、梯度分布规律以及变截面参数对系统动力学特性的影响. 结果表明,剪切效应对大高跨比的FGM楔形梁的变形影响较为明显,不容忽略;材料梯度分布规律和截面参数的选取均会对旋转FGM楔形梁的动力学响应和频率产生较大影响. 本文提出的考虑剪切效应的倾角刚柔耦合动力学模型是对以往非剪切模型的进一步完善,可应用于工程中的 Timoshenko梁结构的动力学问题求解.      

Time reversal for obstacle location in elastodynamics from acoustic recording

The Note is concerned with a feasibility study of time reversal in a non-homogeneous elastic medium, from data recorded in an acoustic medium. Our aim here is to determine the presence and some physical properties of elastic “inclusions” (unknown, not observable solid objects, characterized by their elastic properties) from partial observations of acoustic waves scattered by these inclusions. A finite element numerical method, based on a variational acousto-elastodynamics formulation, is derived and used to solve the forward, and then, the time-reversed problem. A criterion, derived from the reverse time migration framework, is introduced, to help construct images of the inclusions to be determined. Numerical illustrations on configurations that mimic the breast cancer configuration are proposed, and show that one can differentiate between two inclusions, even with different properties.     

低维螺旋磁体纳米条带中磁场驱动的磁结构演变规律

利用蒙特卡洛方法研究了低维螺旋磁体纳米条带中磁场驱动的磁结构演变规律，以及偶极相互作用对螺旋磁体纳米条带中磁结构的影响。研究表明，螺旋磁体纳米条带中的自旋结构由自旋的面内取向平行或垂直于边界的边缘态和中间聚集态两部分构成。在一定范围内增加外磁场，条带边缘平行于边界的自旋排列将增多，最终将在条带外围形成大的磁涡旋环，该涡旋环十分稳定，即使在很强的外磁场下仍然存在。处于条带中间的聚集态随着外磁场的增大，从磁螺旋态逐步过渡到Skyrmions态，最终形成铁磁态。Skyrmions的排列状况与条带尺寸密切相关。此外，偶极相互作用对磁矩平行于边界且首尾顺次连接的排列起积极作用，在无外磁场作用下，随着偶极相互作用的增大，体系终将形成涡旋态。     

A MODAL TESTING METHOD FOR CANTILEVER BEAM1)

基于欧拉-伯努利梁理论得到悬臂梁自由振动的振型函数。通过数值计算得出实验用的悬臂梁前五阶振型的节点位置及其与梁长的比值。考虑传感器对悬臂梁固有频率的影响,建立梁-传感器模型进行仿真分析并得出悬臂梁前五阶固有频率。基于节点位置和测点位置,在实验中选择激励点。将具体实验的结果与梁-传感器仿真模型结果进行对比,通过前五阶固有频率的误差分析,发现仿真分析结果与实验结果误差最高为 1.3%。研究完整地叙述了悬臂梁的模态测试流程,可为工程技术人员的模态测试起一定的指导作用。     

Homology modeling and molecular dynamic simulation of UDP-N-acetylmuramoyl-l-alanine-d-glutamate ligase (MurD) from Mycobacterium tuberculosis H37Rv using in silico approach

The present study aimed to identify the prospective inhibitors of MurD, a cytoplasmic enzyme that catalyzes the addition of d-glutamate to the UDP-N-acetylmuramoyl-l-alanine nucleotide precursor in Mycobacterium tuberculosis (MTB), using virtual screening, docking studies, pharmacokinetic analysis, Molecular Dynamic (MD) simulation, and Molecular Mechanics Generalized Born and Surface Area (MM-GBSA) analyses. The three dimensional (3D) structure was determined based on the homology technique using a template from Streptococcus agalactiae. The modeled structure had three binding sites, namely; substrate binding site (Val18, Thr19, Asp39, Asp40, Gly75, Asn147, Gln171 and His192), the ATP binding site (Gly123, Lys124, Thr125, Thr126, Glu166, Asp283, and Arg314) and the glutamic acid binding site (Arg382, Ser463, and Tyr470). These residues mentioned above play a critical role in the catalytic activity of the enzyme, and their inhibition could serve as a stumbling block to the normal function of the enzyme. A total of 10,344 obtained from virtual screened of Zinc and PubChem databases. These compounds further screened for Lipinski rule of five, docking studies and pharmacokinetic analysis. Four compounds with good binding energies (ZINC11881196 = −10.33 kcal/mol, ZINC12247644 = −8.90 kcal/mol, ZINC14995379 =−8.42 kcal/mol, and PubChem6185 = −8.20 kcal/mol), better than the binding energies of the ATP (−2.31 kcal/mol) and the ligand with known IC₅₀, Aminothiazole (−7.11 kcal/mol) were selected for the MD simulation and MM-GBSA analyses. The result of the analyses showed that all the four ligands formed a stable complex and had the binding free energies better than the binding energy of ATP. Therefore, these ligands considered as suitable prospective inhibitors of the MurD after experimental validation.     

Preparation,rheological and drag reduction properties of hydrophobically associating polyacrylamide polymer

Hydrophobically associating polymer (HAMDP) was synthesized by using acrylamide, acrylic acid, 2-acrylamido-2-methylpropane sulfonic acid and dodecyl 2-methylacrylate as main monomers. Dynamic rheometer and self-made simulation evaluation apparatus were used to test the rheological and drag reduction properties of HAMDP. With the mass concentration increased, the apparent viscosity of HAMDP increased. The critical aggregation concentration was 2.29g/L. With the changement of the strain, the elastic modulus was larger than viscous modulus. With the increment of HAMDP, the area of thixotropic loop increased. Compared with commercial polyacrylamide, the drag reduction rate of HAMDP could be up to 62.38%.