基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

求解矩阵方程AXB+CXD=F参数迭代法的最优参数分析

本文针对求矩阵方程AXB+CXD=F唯一解的参数迭代法，分析当矩阵A，B，C，D均是Hermite正（负）定矩阵时，迭代矩阵的特征值表达式，给出了最优参数的确定方法，并提出了相应的加速算法.     

水化硅酸钙纳米压痕分子动力学模拟方法优化

针对水化硅酸钙纳米压痕模型忽视了压头与基底之间相互作用的问题，由尺寸差异引起的金刚石压头难以计算的问题，以及Wittmann模型无法得到实际接触面积的问题，提出了新的模型与计算方法．结合分子动力学方法，采用金刚石压头-Wittmann模型基底的组合方式构建无定形态水化硅酸钙纳米压痕试验模型．在建模阶段，考虑到压头模型与基底模型粒子间尺寸差异，提出了等比例替换模型，通过公式推导并就不同尺寸模拟结果验证了等比例替换模型的可行性．在计算阶段，提出了局部前处理的弛豫方法进行模拟．确定最大荷载位置处的接触面积为546 nm2，进而求出水化硅酸钙模型硬度H为0.84 GPa、折合模量Er为30.52 GPa．并通过纳米压痕试验，验证了模拟结果的准确性，证明了模型的科学性，对今后水化硅酸钙(C-S-H)纳米层面的模拟具有重要借鉴意义．     

移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

Ag@CH3NH3PbI3等离激元效应增强钙钛矿太阳能电池性能的数值研究

由于银纳米粒子结构的表面等离激元共振特性对有机无机卤化物钙钛矿的新型太阳能电池性能有一定影响,利用comsol mutiphysics多物理场仿真软件对Ag@CH3 NH3 PbI3纳米粒子等离激元效应增强钙钛矿太阳能薄膜电池性能进行研究,对粒子半径和粒子间距对于能量的影响进行了计算;对光敏层能量增强的机理进行了解释;并对电场分布进行了详细说明.依据实验数据,给出优化后的银纳米粒子阵列和钙钛矿光敏层的厚度以及强度,为实验制备高效稳定的钙钛矿太阳能电池提供理论指导.