排序方式: 共有14条查询结果,搜索用时 156 毫秒
1.
内置胶囊混凝土的裂缝自愈合行为分析和试验 总被引:12,自引:0,他引:12
研究了一种具有裂缝自愈合行为的内置胶囊混凝土.首先,建立了描述修复胶囊在混凝土中的分布和取向函数;然后,根据混凝土的破坏机理,确定了修复胶囊的破坏应力;第三,通过实验分析了修复胶囊的几何参数和体积率对混凝土性能的影响,得到了几何参数和体积率的最佳取值范围;第四,利用ANSYS对修复胶囊进行了有限元分析,确定了其合理的壁厚,为修复胶囊材料的选择提供了一种研究方法;最后,进行了内置胶囊混凝土试验,取得了一定的自愈合效果。 相似文献
2.
结构碰撞的动力响应分析 总被引:5,自引:0,他引:5
本文研究结构在动力作用下发生碰撞时的动力响应的分析方法,其中碰撞包括结构与刚(弹)性性支座的碰撞和两个结构物之间的碰撞;碰掸的速度假定为中低速度分析时不考虑局部的破坏问题,本文方法的关键点是提出了碰撞过程中的碰撞反力的模拟表达式。它是通过碰撞时结构与碰撞物体的碰撞力和碰撞变形关系的假定,并利用非完全弹性碰撞过程,当然也可考虑结构阻尼的影响。文末给出了几个算例,其中与有解析解的做了比较,符合得很好。 相似文献
3.
特征向量导数计算的改进直接扰动法 总被引:5,自引:0,他引:5
本文对特征向量导数计算的一种“直接扰动法”进行了改进,使之精度进一步提高,本文不仅从理论上,而且算例结构也证实了这种改进是合理而有效的。 相似文献
4.
5.
6.
7.
双层旋转壳流固耦合振动有限元分析 总被引:1,自引:0,他引:1
本文用旋转壳体元和流体元分析了双层旋转壳体流固耦合振动特性,基于Novozhilov壳体理论、水弹性理论以及Hamilton变分原理推导出耦合系统运行方程,计算结果与实测值比较表明本分析方法有较好的精度。 相似文献
8.
非对称矩阵特征值问题密集模态重分析方法 总被引:1,自引:0,他引:1
本文提出了一种非对称矩阵特征值问题的密集模态重分析方法,它将原密集特征问题表达为与其临近的某一重特征值的小摄动。从而密集模态的重分析问题就转重频模态的重分析问题。 相似文献
9.
Based on the classical response surface method (RSM), a novel RSM using improved experimental points (EPs) is presented for reliability analysis. Two novel points are included in the presented method. One is the use of linear interpolation, from which the total EPs for determining the RS are selected to be closer to the actual failure surface; the other is the application of sequential linear interpolation to control the distance between the surrounding EPs and the center EP, by which the presented method can ensure that the RS fits the actual failure surface in the region of maximum likelihood as the center EPs converge to the actual most probable point (MPP). Since the fitting precision of the RS to the actual failure surface in the vicinity of the MPP, which has significant contribution to the probability of the failure surface being exceeded, is increased by the presented method, the precision of the failure probability calculated by RS is increased as well. Numerical examples illustrate the accuracy and efficiency of the presented method. 相似文献
10.