Multiobjective symmetric duality with cone constraints

We formulate a pair of multiobjective symmetric dual programs for pseudo-invex functions and arbitrary cones. Our model is unifying the Wolfe vector symmetric dual and the Mond-Weir vector symmetric dual models. We establish the weak, strong, converse and self duality theorems for our pair of dual models. Nanda and Das' results (Optimization 28 (1994) 267; Eur. J. Oper. Res. 88 (1996) 572) are obtained as special cases.     

Effect of the kinematic hardening on the plastic anisotropy parameters for metallic sheets

The initial plastic anisotropy parameters are conventionally determined from the Lankford strain ratios defined by $r^{\psi }=\frac{{\epsilon }_{22}^{\mathrm{p}\psi }}{{\epsilon }_{33}^{\mathrm{p}\psi }}$ (ψ being the direction of the loading path). They are usually considered as constant parameters that are determined at a given value of the plastic strain far from the early stage of the plastic flow (i.e. equivalent plastic strain of ${\epsilon }_{\mathrm{eq}}^{\mathrm{p}}=0.2\text{\%}$) and typically at an equivalent plastic strain in between 20% and 50% of plastic strain failure (or material ductility). What prompts to question about the relevance of this determination, considering that this ratio does not remain constant, but changes with plastic strain. Accordingly, when the nonlinear evolution of the kinematic hardening is accounted for, the Lankford strain ratios are expected to evolve significantly during the plastic flow.In this work, a parametric study is performed to investigate the effect of the nonlinear kinematic hardening evolution of the Lankford strain ratios for different values of the kinematic hardening parameters. For the sake of clarity, this nonlinear kinematic hardening is formulated together with nonlinear isotropic hardening in the framework of anisotropic Hill-type (1948) yield criterion. Extension to other quadratic or non-quadratic yield criteria can be made without any difficulty. This parametric study is completed by studying the effect of these parameters on simulations of sheet metal forming by large plastic strains.     

基于微态方法的耦合韧性损伤的弹塑性本构模型

基于广义连续介质力学提出了一个热力学一致性的耦合微态韧性损伤的弹塑性本构模型。该模型遵循Forest的微态方法,在有限变形中提出引入额外的微态损伤因子及其一阶梯度以考虑材料的内部特征尺度。通过广义虚功原理得到了微态损伤的补充控制方程,对亥姆霍兹自由能进行扩展,得到了新的包含微态损伤变量的损伤能量释放率,在微态损伤的正则化作用下,采用隐式迭代更新局部损伤和应力等状态变量。基于Galerkin加权余量法,推导了以传统位移和微态损伤为基本未知量的有限元列式。利用该数值模型,对DP1000材料的单向拉伸实验和十字形零件的冲压实验进行了应变局部化与材料断裂的有限元分析。结果表明,该微态弹塑性损伤模型可以得到一致的有限元模拟响应曲线并收敛到实验曲线,从而避免发生网格依赖性问题。     

Copper nitride (Cu3N) thin films deposited by RF magnetron sputtering

The copper nitride thin films were prepared on glass substrate by RF magnetron sputtering method. At pure nitrogen atmosphere, the nitrogen flow rate affects the copper nitride thin films’ structures. Only a little part of nitrogen atoms insert into the body center of Cu₃N structure and parts of nitrogen atoms insert into Cu₃N crystallites boundary at higher nitrogen flow rate. But the indirect optical energy gap, E_opg, decreases with increasing nitrogen flow rate. The typical value of E_opg is 1.57 eV. In a nitrogen and argon mixture atmosphere, when the nitrogen partial was less than 0.2 Pa at 50 sccm total flow rate, the (1 1 1) peak of copper nitride appears. Thermal decomposition temperature of Cu₃N thin films deposited in pure nitrogen and 30 sccm flow rate was less than 300 °C. The surface morphology was smooth.     

Micromorphic approach for finite gradient-elastoplasticity fully coupled with ductile damage: Formulation and computational aspects

It is well established that the use of inelastic constitutive equations accounting for induced softening, leads to pathological space (mesh) and time discretization dependency of the numerical solution of the associated Initial and Boundary Value Problem (IBVP). To avoid this drawback, many less or more approximate solutions have been proposed in the literature in order to regularize the IBVP and to obtain numerical solutions which are, at convergence, much less sensitive to the space and the time discretization. The basic idea behind these regularization techniques is the formulation of nonlocal constitutive equations by introducing some effects of characteristic lengths representing the materials microstructure. In this work, using the framework of generalized nonlocal continua, a thermodynamically-consistent micromorphic formulation using appropriate micromorphic state variables and their first gradients, is proposed in order to extend the classical local constitutive equations by incorporating appropriate characteristic internal lengths. The isotropic damage, the isotropic and the kinematic hardenings are supposed to carry the targeted micromorphic effects. First the theoretical aspects of this fully coupled micromorphic formulation is presented in details and the proposed generalized balance equations as well as the fully coupled micromorphic constitutive equations deduced. The associated numerical aspects in the framework of the classical Galerkin-based FE formulation are briefly discussed in the special case of micromorphic damage. Specifically, the formulation of 2D finite elements with additional degrees of freedom (d.o.f.), the dynamic explicit global resolution scheme as well as the local integration scheme, to compute the stress tensor and the state variables at each integration point of each element, are presented. Application is made to the typical uniaxial tension specimen under plane strain conditions in order to chow the predictive capabilities of the proposed micromorphic model, particularly against its ability to give (at convergence) a mesh independent solution even for high values of the ductile damage (i.e., the macroscopic cracks).     

Strain rate distribution and localization band width evolution during tensile test

The main objective of this paper is to study the evolution of the necking zone in a flat specimen during a tensile test. Two approaches are used and compared:

• –An experimental investigation of the strain rate distribution with Electronic Speckle Pattern Interferometry (ESPI).
• –A numerical analysis with a thermodynamically consistent constitutive model that couples strongly isotropic continuum damage (CDM) and the elastoplastic behavior.

It is shown that strain rate maps are, for both approaches, relevant to investigate the development of the X-shape pattern that occurs during necking evolution. In particular, this pattern can be clearly observed on maps of the minimum determinant of the acoustic tensor. It appears even when damage values are low and the problem is still elliptic.It is shown that ESPI and CDM modeling are able to give a coherent picture of the phenomena that occur during neck development from the onset of instability to localize necking, in particular on localization bands angles and widths. In particular, physically meaningful information which is seldom considered such as band width evolution or strain rate distribution will be extracted from the analysis.