Design of Functional Carbon Composite Materials for Energy Conversion and Storage

The carbon composite materials have been a research hotspot in the fields of catalysis, energy conversion and so on, because of their features of large structure and morphology variety, good chemical and electrochemical stability, and high electronic conductivity, large specific surface area and rich active sites. This paper summarizes some research progress of carbon composite materials, including assembly methodologies, their structure regulation, properties, and related applications. Moreover, the current challenges and the prospects of these materials are also discussed.     

Global existence and time decay of the non-cutoff Boltzmann equation with hard potential

This paper is concerned with the Cauchy problem on the Boltzmann equation without angular cutoff assumption for hard potential in the whole space. When the initial data is a small perturbation of a global Maxwellian, the global existence of solution to this problem is proved in unweighted Sobolev spaces $H^N\left({\mathbb{R}}_{x,v}^6\right)$ with $N\ge 2$. But if we want to obtain the optimal temporal decay estimates, we need to add the velocity weight function, in this case the global existence and the optimal temporal decay estimate of the Boltzmann equation are all established. Meanwhile, we further gain a more accurate energy estimate, which can guarantee the validity of the assumption in Chen et al. (0000).     

石墨基液流电池复合双极板

液流电池是一种安全性高、使用寿命长、可扩展的大规模储能系统,可以协助电网调峰储能,提高能源利用率,发展前景广阔。双极板是液流电池的重要组成部分。功能上起到了分隔、串联电池、传导电流、为电堆提供结构支撑等作用。从成本构成角度看,双极板的价格占电堆成本的比重也较大。开发高性能、低成本的双极板对加快液流电池的商业化应用具有重要意义,也是目前业界的迫切需求。虽然文献上报道了许多针对液流电池双极板开发的工作,但是目前高性能、低成本的液流电池双极板产品仍无法充分满足市场需求。本文着重介绍了石墨基复合双极板的研究现状,介绍了材料选择、工艺流程对关键性能的影响,对相关工作进行了评述,并为液流电池双极板的开发提出了建议。     

Editorial to the Special Issue: Adsorption,Absorption and Thermochemical Transport Processes in Complex Porous Structures

Transport in Porous Media - The theme of coupling problems for adsorption, absorption and thermochemical transport in porous media is very important for engineering applications. Based on the...     

Towards Fabrication of Atomic Dopant Wires via Monolayer Doping Patterned by Resist-Free Lithography

Fabrication of atomic dopant wires at large scale is challenging.We explored the feasibility to fabricate atomic dopant wires by nano-patterning self-assembled dopant carrying molecular monolayers via a resist-free lithographic approach.The resist-free lithography is to use electron beam exposure to decompose hydrocarbon contaminants in vacuum chamber into amorphous carbon that serves as an etching mask for nanopatterning the phosphorus-bearing monolayers.Dopant wires were fabricated in silicon by patterning diethyl vinylphosphonate monolayers into lines with a width ranging from 1 μm down to 8 nm.The dopants were subsequently driven into silicon to form dopant wires by rapid thermal annealing.Electrical measurements show a linear correlation between wire width and conductance,indicating the success of the monolayer patterning process at nanoscale.The dopant wires can be potentially scaled down to atomic scale if the dopant thermal diffusion can be mitigated.     

Regulating Phase Junction and Oxygen Vacancies of TiO2 Nanoarrays for Boosted Photoelectrochemical Water Oxidation

In this study, we have provided a facile solution to synthesize well-aligned titanium dioxide nanorods by using hydrothermal reaction. By calcining the materials under different atmospheres and temperatures, a batch of titanium dioxides with excellent oxygen evolution reaction(OER) catalytic efficiency were obtained. This new structured TiO₂ photoanode material yields a high photocurrent density of 5.69 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE) under simulated solar light(100 mW/cm²). Surface photovoltage techniques and other measurements were carried out to confirm that the enhanced photoelectrochemical performances were attributed to the synergistic effect of the phase junction and a certain content of surface states, which accelerate the separation and transmission of the photogenerated charges. This material with phase junction and surface states promises a potential application in the field of photoelectric catalysis under solar light.     

Investigation on spherically expanding flame temperature of n-butane/air mixtures with tunable diode laser absorption spectroscopy

A joint schlieren imaging, pressure recording and tunable diode laser absorption spectroscopy (TDLAS) thermometry technique was developed to simultaneously determine the flame radius, pressure and line-of-sight averaged temperature of spherically expanding flames of n-butane/air mixtures at initial temperature of 298 K, initial pressure of 1 atm and equivalence ratios of 0.9–1.5. To probe the flame temperature, a mid-infrared interband cascade laser at 4.2 µm was used to measure the time-resolved direct absorption spectra of CO₂ which are strongly related to flame temperature, CO₂ mole fraction, flame radius and pressure. Quantitative line-of-sight averaged temperatures of burnt gas were obtained by fitting the normalized absorbance spectra. Three typical stages, including the spark affected initial stage, quasi-steady stage and the pressure induced growing stage are determined from the evolution of measured temperature as a function of time and flame radius. The relation between flame temperature, stretch rate and burning velocity of burnt gas are analyzed. Stretch rate is found to have minor effect on the measured temperature in the quasi-steady stage. The relative variation of temperature is much smaller than that of velocity. The flame with lower normalized temperature tends to propagate slower.     

政府监管下的医院医疗信息分享演化博弈分析

在分析政府监管下医院间医疗信息分享特征的基础上,结合我国当前正在推行的医联体医院间信息分享运作模式,引入梅特卡夫定律并考虑患者评价的影响,分析了监管部门与医院各自的利益组成,建立了监管部门与医院两者之间的演化博弈模型,并采用复制动态方程研究了不同情形下医院间信息分享的演化博弈轨迹。研究表明,政府通过监管并建立激励惩罚机制等引导措施对医院最终达到的演化稳定态具有极大影响;降低医院主体信息分享的风险成本、规范提高医院分享信息的质量、引导患者增强对医院信息分享的关注、制定有吸引力和威慑力的奖惩政策,是促进医院医疗信息分享的关键。研究结果可为政府监管部门预测医院间的信息分享趋势和制定精准化政策以促进分享提供参考。     

Component ordering strategies in assembly systems with uncertain capacity and random yield

Sourcing components in a complex global supplier network may lead to a high degree of supply uncertainty. Events, such as unexpected production defects or insufficient supplier capacity, can cause unexpected shortages of required components and halt the assembly of final products. Accordingly, the assembly enterprises must effectively manage various supply uncertainties in their component ordering decisions to avoid such component shortfalls. These issues have guided this research to investigate the optimal ordering strategies of an assembler facing the following two types of supply uncertainty: the uncertain production capacity of a standard component (component 1) and the random production yield of a core component (component 2). The assembler makes the component ordering decisions before these supply uncertainties are realized. We characterize the optimal ordering decision and find that the assembler should order components 1 and 2 according to a fixed ratio, which only depends on the random yield of component 2 and the production cost of component 1, but not on the uncertain capacity of component 1. A case study is presented to further explore the intertwined effects of these two uncertainties in an assembly system. Finally, the model is extended to consider a secondary option of buying additional component 1 s after observing some or all of the supply uncertainties, and this secondary option endows the firm with different capabilities in counteracting the supply uncertainties.     

Optimal Sensor Placement Method Considering the Importance of Structural Performance Degradation for the Allowable Loadings for Damage Identification

Considering the importance of damage for the structural performance and for decreasing the identification error, this paper proposes an optimal sensor placement method based on a weighted standard deviation norm (WSDN) index. The standard deviation of the identified damage parameters is solved using the series expansion theory and probabilistic method to quantify the effect of a measurement error on damage identification. The damage estimation weight (DEW) index, which can reflect the importance of each element in the structural capabilities, is established based on a performance-damage curve. A significant DEW for a specified element indicates that the element is important for the structure and that its identification error should be small. The WSDN index is obtained from the Hadamard product of the standard deviations (SDs) and DEWs. Thus, the identification error of the entire structure is measured using the weighting coefficient. The optimal sensor placement (OSP) procedure is performed by minimizing the WSDN index. The proposed method can clearly decrease the uncertainties of the identification results for the important elements. Other OSP criteria, including the condition number, information entropy, and standard deviation norm, which aim to decrease the identification error, are discussed in this paper for comparison with the proposed method. Two numerical examples and an experiment, which pertain to the deformation performance, buckling features, and dynamic characteristics, are discussed to verify the advantages of the proposed method.