基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

Dynamic Bivariate Mortality Modelling

The dependence structure of the life statuses plays an important role in the valuation of life insurance products involving multiple lives. Although the mortality of individuals is well studied in the literature, their dependence remains a challenging field. In this paper, the main objective is to introduce a new approach for analyzing the mortality dependence between two individuals in a couple. It is intended to describe in a dynamic framework the joint mortality of married couples in terms of marginal mortality rates. The proposed framework is general and aims to capture, by adjusting some parametric form, the desired effect such as the “broken-heart syndrome”. To this end, we use a well-suited multiplicative decomposition, which will serve as a building block for the framework to relate the dependence structure and the marginals, and we make the link with existing practice of affine mortality models. Finally, given that the framework is general, we propose some illustrative examples and show how the underlying model captures the main stylized facts of bivariate mortality dynamics.

     

Unveiling the Layer‐Dependent Catalytic Activity of PtSe2 Atomic Crystals for the Hydrogen Evolution Reaction

Two‐dimensional (2D) PtSe₂ shows the most prominent layer‐dependent electrical properties among various 2D materials and high catalytic activity for hydrogen evolution reaction (HER), and therefore, it is an ideal material for exploring the structure–activity correlations in 2D systems. Here, starting with the synthesis of single‐crystalline 2D PtSe₂ with a controlled number of layers and probing the HER catalytic activity of individual flakes in micro electrochemical cells, we investigated the layer‐dependent HER catalytic activity of 2D PtSe₂ from both theoretical and experimental perspectives. We clearly demonstrated how the number of layers affects the number of active sites, the electronic structures, and electrical properties of 2D PtSe₂ flakes and thus alters their catalytic performance for HER. Our results also highlight the importance of efficient electron transfer in achieving optimum activity for ultrathin electrocatalysts. Our studies greatly enrich our understanding of the structure–activity correlations for 2D catalysts and provide new insight for the design and synthesis of ultrathin catalysts with high activity.     

Rational design of perfluorinated sulfonic acid ionic sieve modified separator for high-performance Li-S battery

Journal of Solid State Electrochemistry - Practical application of Li-S battery is limited by the fast capacity decay and low coulombic efficiency caused by the shuttling phenomenon. Modification...     

新型稀磁半导体Fe掺杂LiZnP的光电性质

采用基于密度泛函理论的第一性原理计算法研究了新型稀磁半导体Li_(1±)_y(Zn_(1-)_xFe_x)P (x=0, 0.0625;y=0, 0.0625)的电子结构、磁性及光学性质.结果表明,Fe的掺入使体系产生自旋极化杂质带,Fe的3d态与Li2s态,Zn4s态以及P3p态的态密度峰在费米能级处出现重叠,产生sp-d轨道杂化,此时体系净磁矩最大,材料表现出金属性,导电性增强.当Li空位时,导电性减弱,但杂质带宽度最大,居里温度最高.而Li填隙时,体系形成能最低,材料变为半金属性,表现为100%自旋注入,表明掺杂体系的磁性和电性可以分别通过Fe的掺入和Li的含量进行调控.对比光学性质发现,Li空位时,在介电函数虚部和复折射率函数的低能区出现新峰,扩大了对低频电磁波的吸收范围.能量损失函数表明掺杂体系具有明显的蓝移效应,且Li填隙时有更强的等离子共振频率.     

Pharmacokinetic study of tanshinol and ligustrazine in rat plasma after intravenous administration of tanshinol and Danshen Chuanxiongqin Injection

To investigate the effect of ligustrazine on the pharmacokinetic profile of tanshinol after intravenous administration in rats, a sensitive liquid chromatography tandem mass spectrometry method was developed and validated for quantitative determination of tanshinol and ligustrazine in rat plasma. After prepared by protein precipitation, the analytes were separated on a Waters Acquity HSS T3 column (100 × 2.1 mm, 1.8μm) and eluted by 0.1% formic acid in water and acetonitrile at a flow rate of 0.4 ml/min. The precursor–product ion transitions were m/z 197.0 → 135.0 for tanshinol, m/z 417.1 → 255.1 for liquiritin (internal standard) in negative ion mode and m/z 137.1 → 55.0 for ligustrazine in positive ion mode. To avoid the interference of tanshinol metabolite transformation, the stability of analytes in samples collected after administration was assessed. The validated method was successfully applied to a pharmacokinetic study after intravenous administration of single tanshinol and Danshen Chuanxiongqin Injection. After Danshen Chuanxiongqin injection administration, the values of elimination half-time, area under the concentration–time curve and C_o were 0.36 ± 0.13 h, 1.29 ± 0.37 μg/ml h and 10.51 ± 2.58 μg/ml for male rats, respectively. In the single tanshinol group, the corresponding values were 0.56 ± 0.24 h, 1.85 ± 0.44 μg/ml h and 14.11 ± 2.26 μg/ml for male rats—30–40% higher than those for the Danshen Chuanxiongqin Injection group. There was a significant different between male and female rats. This study provided information on the influence of ligustrazine on the pharmacokinetic characteristics of tanshinol after intravenous administration of Danshen Chuanxiongqin Injection in rats, which will be helpful for its clinical application.     

Unlocking the Drug Potential of the Bryostatin Family: Recent Advances in Product Synthesis and Biomedical Applications

Bryostatins are a class of naturally occurring macrocyclic lactones with a unique fast developing portfolio of clinical applications, including treatment of AIDS, Alzheimer's disease, and cancer. This comprehensive account summarizes the recent progress (2014–present) in the development of bryostatins, including their total synthesis and biomedical applications. An emphasis is placed on the discussion of bryostatin 1 , the most-studied analogue to date. This review highlights the synthetic and biological challenges of bryostatins and provides an outlook on their future development.     

三色圆偏振激光组合脉冲驱动氦原子产生椭圆偏振的阿秒脉冲

我们提出利用频率为ω,3ω和强度较弱的2ω组成的三色圆偏振激光组合脉冲驱动氦原子能够得到椭偏率较大的阿秒脉冲链的一种方法.通过强场近似方法,计算了氦原子在两色和三色圆偏振激光组合脉冲驱动下发射高次谐波谱及其合成阿秒脉冲链,比较了氦原子(初态为s态)在这两种情况下发射高次谐波谱的特点及其合成阿秒脉冲链椭偏率的大小,结果发现,在反旋的两色ω,3ω激光脉冲基础上加入了频率为2ω的第三色激光脉冲联合作用到氦原子上,所得到的阿秒脉冲链的椭偏率相对于双圆场情况下有所增加,通过调整ω,3ω激光的强度比,并且选择适当的第三色激光的强度,对初态为s态的原子,仍能够得到具有较大椭偏率的阿秒脉冲链.     

A New Method of Testing and Evaluating the Quality of Refined Montan Wax: Digital Color and GC Fingerprint

To establish a new method of testing and evaluating the quality of refined montan wax (RMW), digital color and GC fingerprint technology were introduced and applied. CIE Lab color mode was used to digitize the exterior colors of RMW, and the score obtained through a fitting function was also used to reflect its quality. It is shown that they were in complete accord with the human visual perception trend. The GC fingerprint was used to characterize the internal chemical information of RMW, and the composition of its internal features was reflected through the relative retention time (RRT) and relative peak area (RPA) values. It is shown that there was a high degree of similarity between the fingerprints, while certain differences also existed. This can be used to implement effective application of RMW to aspects such as quality control, adulteration identification, and origin attributions.