基于NSCT和CLAHE的乳腺钼靶X线图像微钙化点增强方法

针对微钙化点容易漏检的问题,提出一种非下采样轮廓波变换结合对比度受限自适应直方图均衡的乳腺图像微钙化点增强新算法。对乳腺图像预处理,提取乳房区域并将胸肌区域去除;再对图像进行非下采样轮廓波变换提取多尺度、多方向的子带,对其中的多个高频子带采用高斯拉普拉斯算子检测边缘并增强;进一步采用对比度受限自适应直方图均衡算法,提高图像局部小区域的对比度,实现乳腺图像微钙化点增强算法。结果表明该方法是一种有效的乳腺钼靶图像微钙化点增强方法,为微钙化点检测和乳腺癌诊断提供支持。     

基于蛇形光路的PET探测器作用深度提取方法

为实现正电子发射断层成像(Positron Emission Tomography,PET)探测器的作用深度(Depth Of Interaction,DOI)信息获取,本文提出一种基于分光技术的探测器设计方案.探测器采用晶体单元与硅光电倍增管(Silicon Photomultiplier,SiPM)一对一耦合、蛇形光路的设计和单端Anger加权读出方法进行DOI解码.基于GATE软件进行蒙特卡罗模拟,建立8×1的LSO晶体阵列(单根晶体尺寸3.1×3.1×20mm3);模拟泛场照射获取位置查找表;并进行不同深度的模拟,获得各晶体在各深度的空间分辨率.结果显示所模拟的探测器模块DOI分辨率在1.0~6.7mm之间,平均值为3.2mm.本文提出的基于蛇形光路的PET探测器方案能在维持系统成本和复杂度的前提下实现DOI解码,提升PET系统的成像性能.     

Hybrid temperature effect on a quartz crystal microbalance resonator in aqueous solutions

The quartz crystal microbalance(QCM) is an important tool that can sense nanogram changes in mass. The hybrid temperature effect on a QCM resonator in aqueous solutions leads to unconvincing detection results. Control of the temperature effect is one of the keys when using the QCM for high precision measurements. Based on the Sauerbrey's and Kanazawa's theories, we proposed a method for enhancing the accuracy of the QCM measurement, which takes into account not only the thermal variations of viscosity and density but also the thermal behavior of the QCM resonator. We presented an improved Sauerbrey equation that can be used to effectively compensate the drift of the QCM resonator. These results will play a significant role when applying the QCM at the room temperature.     

Vibration analysis of a new polymer quartz piezoelectric crystal sensor for detecting characteristic materials of volatility liquid

We present a new polymer quartz piezoelectric crystal sensor that takes a quartz piezoelectric crystal as the basal material and a nanometer nonmetallic polymer thin film as the surface coating based on the principle of quartz crystal microbalance (QCM). The new sensor can be used to detect the characteristic materials of a volatile liquid. A mechanical model of the new sensor was built, whose structure was a thin circle plate composing of polytef/quartz piezoelectric/polytef. The mechanical model had a diameter of 8 mm and a thickness of 170 μ. The vibration state of the model was simulated by software ANSYS after the physical parameters and the boundary condition of the new sensor were set. According to the results of experiments, we set up a frequency range from 9.995850 MHz to 9.997225 MHz, 17 kinds of frequencies and modes of vibration were obtained within this range. We found a special frequency f_sp of 9.996358 MHz. When the resonant frequency of the new sensor’s mechanical model reached the special frequency, a special phenomenon occurred. In this case, the amplitude of the center point O on the mechanical model reached the maximum value. At the same time, the minimum absolute difference between the simulated frequency based on the ANSYS software and the experimental measured stable frequency was reached. The research showed that the design of the new polymer quartz piezoelectric crystal sensor perfectly conforms to the principle of QCM. A special frequency value f_sp was found and subsequently became one of the most important parameters in the new sensor design.     

用于MHZ重频光导开关触发的光纤分光系统设计

为了实现光导开关以MHz重复频率运行,设计了通过延迟产生MHz序列重复频率触发光的分光系统。分光系统由多根类蜂窝状排布的光纤组成并分为数组,各组光纤长度不同以产生时间序列。进行了光纤分光系统的理论计算,设计了分组程序,获得了各根光纤的输出端能量占比,实现了光纤输出端的分组设计优化。计算结果表明:当分光系统半径与激光器焦斑之比增大时,分光系统效率增高,达到一定数值后,分光系统效率趋于稳定;当激光器焦斑大小不变时,光纤层数增大,分光系统效率变小;当触发光脉冲数不变时,在一定范围内,光纤层数增大,输出端激光能量的最大相对误差变小。实验结果表明:四脉冲10 MHz分光系统实现了周期为100 ns的4个光脉冲输出,输出端能量最大相对误差6.80%,系统效率为38.07%。     

New pattern recognition system in the e-nose for Chinese spirit identification

This paper presents a new pattern recognition system for Chinese spirit identification by using the polymer quartz piezoelectric crystal sensor based e-nose. The sensors are designed based on quartz crystal microbalance(QCM) principle,and they could capture different vibration frequency signal values for Chinese spirit identification. For each sensor in an8-channel sensor array, seven characteristic values of the original vibration frequency signal values, i.e., average value(A),root-mean-square value(RMS), shape factor value(S_f), crest factor value(C_f), impulse factor value(I_f), clearance factor value(CL_f), kurtosis factor value(K_v) are first extracted. Then the dimension of the characteristic values is reduced by the principle components analysis(PCA) method. Finally the back propagation(BP) neutral network algorithm is used to recognize Chinese spirits. The experimental results show that the recognition rate of six kinds of Chinese spirits is 93.33% and our proposed new pattern recognition system can identify Chinese spirits effectively.     

Elastic-plastic deformation of sandwich rod on elastic basis

Sandwich composite material possesses advantages of both light weight and high strength. Although the mechanical behaviors of sandwich composite material with the influence of single external environment have been intensively studied, little work has been done in the study of mechanical property, in view of the nonlinear behavior of sandwich composites in the complicated external environments. In this paper, the problem about the bending of the three-layer elastic-plastic rod located on the elastic base, with a compressibly physical nonlinear core, has been studied. The mechanical response of the designed three-layer elements consisting of two bearing layers and a core has been examined. The complicated problem about curving of the three-layer rod located on the elastic base has been solved. The convergence of the proposed method of elastic solutions is examined to convince that the solution is acceptable. The calculated results indicate that the plasticity and physical nonlinearity of materials have a great influence on the deformation of the sandwich rod on the elastic basis.     

Vibration analysis of a new polymer quartz piezoelectric crystal sensor for detecting characteristic materials of volatility liquidVibration analysis of a new polymer quartz piezoelectric crystal sensor for detecting characteristic materials of volatility liquid

We present a new polymer quartz piezoelectric crystal sensor that takes a quartz piezoelectric crystal as the basal material and a nanometer nonmetallic polymer thin film as the surface coating based on the principle of quartz crystal microbalance （QCM）. The new sensor can be used to detect the characteristic materials of a volatile liquid. A mechanical model of the new sensor was built, whose structure was a thin circle plate composing of polytef/quartz piezoelectric/polytef. The mechanical model had a diameter of 8 mm and a thickness of 170 ~tm. The vibration state of the model was simulated by software ANSYS after the physical parameters and the boundary condition of the new sensor were set. According to the results of experiments, we set up a frequency range from 9.995850 MHz to 9.997225 MHz, 17 kinds of frequencies and modes of vibration were obtained within this range. We found a special frequency fsp of 9.996358 MHz. When the resonant frequency of the new sensor＇s mechanical model reached the special frequency, a special phenomenon occurred. In this case, the amplitude of the center point O on the mechanical model reached the maximum value. At the same time, the minimum absolute difference between the simulated frequency based on the ANSYS software and the experimental measured stable frequency was reached. The research showed that the design of the new polymer quartz piezoelectric crystal sensor perfectly conforms to the principle of QCM. A special frequency value fsp was found and subsequently became one of the most important parameters in the new sensor design.     

光致氧化还原调控的活性聚合

近几年,光致氧化还原调控的可控自由基聚合得到了迅速发展,其适用单体范围广、反应条件温和,为合成聚合物和功能高分子材料提供了新方法。本综述对光致氧化还原调控活性聚合进行了总结与探讨,归纳整理了多种单体聚合的最新研究进展,为研究人员探索光催化聚合反应、设计合成功能高分子材料提供了新思路。     

Application of the new pattern recognition system in the new e-nose to detecting Chinese spirits

We present a new pattern recognition system based on moving average and linear discriminant analysis （LDA）, which can be used to process the original signal of the new polymer quartz piezoelectric crystal air-sensitive sensor system we designed, called the new e-nose. Using the new e-nose, we obtain the template datum of Chinese spirits via a new pattern recognition system. To verify the effectiveness of the new pattern recognition system, we select three kinds of Chinese spirits to test, our results confirm that the new pattern recognition system can perfectly identify and distinguish between the Chinese spirits.