A self-powered and sensitive terahertz photodetection based on PdSe2

With the rapid development of terahertz technology, terahertz detectors are expected to play a key role in diverse areas such as homeland security and imaging, materials diagnostics, biology, medical sciences, and communication. Whereas self-powered, rapid response, and room temperature terahertz photodetectors are confronted with huge challenges. Here, we report a novel rapid response and self-powered terahertz photothermoelectronic (PTE) photodetector based on a low-dimensional material: palladium selenide (PdSe₂). An order of magnitude performance enhancement was observed in photodetection based on PdSe₂/graphene heterojunction that resulted from the integration of graphene and enhanced the Seebeck effect. Under 0.1-THz and 0.3-THz irradiations, the device displays a stable and repeatable photoresponse at room temperature without bias. Furthermore, rapid rise (5.0 μs) and decay (5.4 μs) times are recorded under 0.1-THz irradiation. Our results demonstrate the promising prospect of the detector based on PdSe₂ in terms of air-stable, suitable sensitivity and speed, which may have great application in terahertz detection.     

粉煤灰基氧氟沙星分子印迹聚合物的制备及其应用

以工业废料粉煤灰微球为基质,氧氟沙星 (OFL) 为模板分子,采用表面印迹法制备印迹材料MIP。通过紫外光谱法结合理论分析选择实验条件,并对该印迹材料结构、吸附行为进行研究。结果表明,该印迹材料对氧氟沙星具有良好的特异识别性和优良的亲和性。与以硅胶为载体制备的印迹聚合物相比,该材料吸附容量更高和印迹效果更好。将其作为固相萃取填料对鸡产品进行分离富集,与C18柱相比,分离富集效果更好。结合UPLC,对实际样品中氧氟沙星进行分析,回收率为82.0%-96.7%,相对标准偏差低于5.5%,可用于鸡产品中氧氟沙星分离分析。     

双分布聚乙二醇接枝纳米二氧化硅的高效可控制备

在混合溶剂中通过"grafting to"的方法将2种分子量不同的聚乙二醇单甲醚(MPEG M_w=750,4000)接枝到氨基修饰的St?ber法二氧化硅(SiO_2-NH_2)表面,制备双分布纳米接枝复合物.采用二步法,先将带环氧端基的低分子量聚乙二醇单甲醚(MPEG-EO)与SiO_2-NH_2在甲苯溶剂中充分反应后,与高分子量的MPEG-EO在甲苯和正癸烷的混合溶剂中使用相同的反应条件和后处理方法,能便捷制备出具有双分布接枝的纳米复合物.在接枝反应体系中,分子链的链段尺寸和接枝密度之间存在着密切关系.一定的范围内,接枝密度随链段尺寸减小而增大.通过改变混合溶剂比例来调控接枝链段的尺寸,可以很好控制聚合物的接枝密度.在双分布接枝的纳米复合物中,低分子量的接枝密度为0.85 chains/nm~2,高分子量的接枝密度能达到0.40 chains/nm~2,体现出了简单、高效、可控的特点,与聚环氧乙烷(PEO)共混后分散良好,对于制备出均匀分散的纳米复合材料起到了一定的指导作用.     

热泵型纯电动客车空调结霜特性实验研究

针对热泵型纯电动客车空调系统在冬季低温高湿环境下,车外换热器易结霜而造成系统制热性能严重衰减的问题,开发了一种带有经济器的补气型纯电动客车热泵空调系统,对车外管翅式换热器结霜特性进行了实验研究。结果表明,当车外换热器完全结霜后,系统制热量和COP均大幅下降。由于采用中压补气技术,系统仍能稳定运行,当车外温度为0、-10、-20℃时,结霜过程中系统制热量分别降低了5、3.2、2.3 kW,COP分别降低了1.1、0.7、0.45,且车外空气相对湿度越大,系统制热性能衰减越严重。     

定曲率螺旋盘管式汽车尾气余热回收装置的性能研究

为研究汽车尾气余热回收装置不同参数对其性能的影响,对汽车尾气余热回收装置定曲率螺旋盘管换热器建立三维仿真模型,研究了雷诺数在4 000～14 000的范围内,定曲率螺旋盘管换热器盘管直径和螺旋直径两个几何参数对阻力和换热性能的影响。结果表明:改变换热器盘管直径,对换热器流动阻力性能影响不大,换热量随着换热器盘管直径的增加而增加;螺旋直径为70 mm时流动阻力增量最大,换热量随着螺旋直径的减小而增大。     

A corresponding-state approach to quark-cluster matter

The state of super-dense matter is essential for us to understand the nature of pulsars; however, non- perturbative quantum chromodynamics makes it very difficult to make direct calculations of the state of cold matter at realistic baryon number densities inside compact stars. Nevertheless, from an observational point of view, it is conjectured that pulsars could be made up of quark clusters since the strong coupling between quarks might render the quarks to be grouped in clusters. In this paper, we attempt to find an equation of state of condensed quark-cluster matter in a phenomenological way. Supposing that the quark-clusters could be analogized to inert gases, we apply here the corresponding-state approach to derive the equation of state of quark-cluster matter, as was similarly demonstrated for nuclear and neutron-star matter in the 1970s. According to the calculations that we have presented, the quark-cluster stars, which are composed of quark-cluster matter, could have a high maximum mass that is consistent with observations and, in turn, further observations of pulsar mass could also place a constraint on the properties of quark-cluster matter. We will also briefly discuss the melting heat during the solid-liquid phase conversion and its related astrophysical consequences.     

复合材料层合板的低速冲击损伤及其剩余压缩强度研究

本文采用理论和实验方法研究了复合材料层合板的低速冲地及其剩余压缩强度。文中利用有限元方法和能量转换原理计算了层合板受到低速冲击的受载最危险状态，以及此时的应力分布；并用Ｔｓａｉ－Ｗｕ张量准则判断损伤情况，对产生损伤的单元进行相应的刚度折减，且作重复计算直至不产生新的损伤为止；最后，对受冲击的层合板还进行剩余压缩强度计算。在实验中，采用激光全息无损检测法测量了层合板的冲击损伤，并对受冲击的层合板进行     

应用内聚力模型研究人牙本质裂纹扩展的升阻能力

论文采用断裂力学中的内聚力模型,结合有限元法研究裂纹沿牙本质小管和垂直于牙本质小管扩展的断裂韧度.数值模拟结果表明牙本质的断裂韧度随着裂纹扩展而增大,表现出上升的阻力曲线(R-curve)特性,但裂纹沿牙本质小管扩展的断裂韧度要大于裂纹垂直于牙本质小管扩展的断裂韧度,表现出各向异性的裂纹扩展阻力曲线性质.同时论文的研究...     

两种谷胱甘肽亲和层析介质的制备及其对谷胱甘肽转移酶融合蛋白的纯化

以国产交联琼脂糖6FF为基质,分别以环氧氯丙烷(ECH)、1,4-丁二醇二缩水甘油醚(BDGE)为活化剂,偶联谷胱甘肽(GSH)得到两种连接臂长度不同的GSH亲和层析介质,并以两种自制介质对融合蛋白GST-ADAM15进行了纯化。结果表明:GSH-ECH-琼脂糖凝胶和GSH-BDGE-琼脂糖凝胶的配基密度分别达到了30～35μmol/mL和15～18μmol/mL,经两种介质纯化后的GST融合蛋白,纯度均达到95%以上,BDGE活化对目标蛋白的回收率占总蛋白26%,ECH活化为13%。相对而言,由于连接臂长度的不同,BDGE活化的介质纯化效果优于ECH。     

正交异性板条的渐近分析

本文阐明由三维薄弹性体的渐近分析导出各级精度板壳理论的基本方法。将多尺度分析用于板的内部区域和边界层区域导出应力,应变和位移等物理量的不同的无量纲小厚度参数ε的渐近展开式。与工程的方法不同,推导仅基于ε→0的渐近分析,对板的变形不做任何假定。给出正交异性板的平面应变渐近展开的具体列式,仅有一些常数待定。结果表明,内域解渐近级数的首项正是熟知的Kirchhoff板理论解。本文为内域解和边界层解的渐近匹配,从而正确表述圣维南原理并用以建立各级渐近解的边界条件进而求解的研究做好了准备。