CO在超临界水中的转化以及碱性钾盐的影响

构建了CO高压溶解的进气系统，在连续式反应系统中对超临界水条件下CO的转化规律进行了研究；针对生物质超临界水气化中钾盐的多样性，选择KHCO₃、K₂CO₃和KOH等三种钾盐成分，研究了它们在不同工艺条件（450-600℃、23-29 MPa、停留时间3-6 s）下对超临界水中水煤气转化过程的影响。结果表明，在无催化条件下，提高反应温度、延长停留时间均提高了CO的转化率，而压力对其影响在低压下（23-25 MPa）比较大，高压下（25-29 MPa）比较小，水煤气转化的反应动力学方程为k=10^3.75×exp（-0.66×10⁵/RT）（s^-1）。碱性钾盐均能显著提高CO转化率，其催化促进程度从大到小依次为：KHCO₃>K₂CO₃>KOH。添加碱性钾盐时，提高反应温度、延长停留时间均提高CO转化率，而压力的影响比较复杂。碱性盐对水煤气转化反应的催化是通过草酸盐（HC₂O₄^-）和甲酸盐（HCOO^-）作为中间产物进行的。     

Kagome晶格中的拓扑平带和量子霍尔效应

本文采用紧束缚模型研究Kagome晶格中的拓扑平带.通过调控交错磁通和次近邻跃迁强度可以得到具有大带隙且Chern数为非零的近平带结构.由于拓扑平带与二维Landau能级的相似性,所以此拓扑非平庸的平带可以产生整数量子霍尔态,再加上相互作用还可能产生分数量子霍尔态.     

APD探测器模块性能及噪声检测

为了实现可见光通信系统的探测器模块微小型化，设计并制作了一款50 cm3的温控APD探测器模块，并对模块的稳定性、温控效果和噪声特性进行了检测。结果表明，APD探测器模块的光电流测量平均相对偏差为0.795%；APD探测器的雪崩增益和响应度随着温度的降低而提高；APD探测器电阻的变化影响负载电阻分压，使得过剩噪声因子的测量值远大于真实值，且会随着入射光功率的增大而增大。可以得出结论:提高反向偏置电压与降低温控温度相配合，更有利于弱光信号检测；检测电路中的负载电阻影响APD探测器噪声特性。     

Chiral separation abilities of homogeneously synthesized cellulose 3,5-dimethylphenylcarbamates: Influences of degree of substitution and molecular weight

A series of cellulose 3,5-dimethylphenylcarbamates(CDMPCs) with different degrees of substitution(DS) and degrees of polymerization(DP) were homogeneously synthesized in 1-allyl-3-methylimidazolium chloride(Amim Cl). Then, the CDMPCs were coated on silica gel and used as chiral stationary phases(CSPs), and their chiral recognition abilities for seven racemates were evaluated by high performance liquid chromatography. The results showed that DS and DP of CDMPCs had a great influence on chiral recognition abilities of the CSPs. The CSPs with the DS ≈ 1 gives a low chiral recognition to most racemates. On the contrast, the CSPs with the DS ? 2 exhibited high chiral separation abilities. For example, six racemates could be separated on the CSP with CDMPC of DS ≈ 2(CSP-2). Especially, for the enantioseparation of 1-(2-naphthyl) ethanol and Tr?ger's base, CSP-2 gave the highest separation ability in all of CSPs. On the other hand, when the DP of cellulose was in a range from 39 to 220, the chiral separation abilities of CDMPCs increased as the DP increased. This work demonstrates that the structure of cellulose esters such as DS and DP has important effect on their chiral separation ability, and therefore provides a practical method to design and prepare desirable CSPs for different racemates.     

Synthesis and characterization of temperature-sensitive cellulose-graft-poly(N-isopropylacrylamide) copolymers

A new series of cellulose-graft-poly(N-isopropylacrylamide)(cellulose-g-PNIPAM) copolymers were prepared by atom transfer radical polymerization(ATRP) of N-isopropylacrylamide monomers from a cellulose-based macro-initiator, which was homogeneously synthesized in an ionic liquid 1-allyl-3-methylimidazolium chloride(Amim Cl). The composition of cellulose-g-PNIPAM copolymers could be adjusted by altering the feeding ratio and reaction time. The resultant copolymers with relatively high content of PNIPAM segments(molar substitution of PNIPAM ? 18.3) were soluble in water at room temperature. Aqueous solutions of cellulose-g-PNIPAM copolymers exhibited clear temperature-sensitive behavior, and their sol-to-gel phase transition properties were investigated by dynamic light scattering(DLS) and UV measurements. Compared with pure PNIPAM, the cellulose-g-PNIPAM copolymers possessed higher lower critical solution temperatures(LCST) in a range from 36.9 ?C to 40.8 ?C, which are close to normal human body temperature, and could be tuned by adjusting the content of PNIPAM segments in copolymers. Spherical structure of cellulose-g-PNIPAM copolymers formed at temperatures above LCST and its morphology was observed by TEM and SEM. These novel cellulose-g-PNIPAM copolymers may be attractive substrates for some biomedical applications, such as drug release and tissue engineering.     

高维线性插值方法及其在3维温度场计算中的应用

通过分析1维和2维线性插值可以推导出任意斜角直线坐标系下n维线性插值的一般计算公式以及有唯一解的条件,这一结论能够应用于三维温度场计算。可以将n维插值问题归结如下:已知n 1维空间中的n 1个点的坐标以及第n 2个点的n个坐标分量xn 2,1,x n 2,2,,xn 2,n,求解该点的第n 1个坐标分量xn 2,n 1。根据线性插值定义,第n 2个点位于前n 1个点所确定的n维超平面上。根据这一条件列写方程、求解方程可得到插值xn 2,n 1。n维插值问题有唯一解的条件是已知的n 1个点在n维空间中构成的多面体的体积不为0。推导过程在斜角直线坐标系中完成,因而结论具有较大普适性。     

反演在骨生长方程参数识别中的应用

基于BFGS算法，根据自行设计的动物实验，得到在不同应力环境中，快速生长期大鼠股骨生 长与重建过程中骨密度实测数据，采用反演数值方法，获取了骨生长方程中随时间变化的 生物参数B和K. 通过正演验证，表明所建立的基于BFGS算法的参数识别方法具有较好的 稳定性和较高的识别精度，能够反演出比较切合实际的生物参数数值. 研究表明，反问 题方法是解决生命现象不可测性和未知性问题的有效手段，把反演方法应用到骨生长与重建 等生命现象的研究中，可确定、修正预设的数学模式，为数值量化骨适应生物模型的建立提 供了一条可行的途径.     

用HLLC方法处理运动边界

针对含有运动边界非结构网格点的显式有限体积方法，研究了如何使用HLLC方法处理运动边界条件，计算了活塞拉伸、压缩问题，并和解析解进行了比较．作为应用示例，比较了静止圆柱绕流和静止流场中运动圆柱的绕流情形。结果表明：应用HLLC方法处理运动边界是可行的。     

基于石墨烯的光纤湿度传感研究

将还原氧化石墨烯(r GO)沉积在侧边抛磨光纤(SPF)上制作了一种新型的光纤湿度传感器。在高湿度区域[相对温度(RH)为70%~95%],传感器的光功率变化达到6.9 d B,尤其在RH为75%~95%区域,传感器对湿度变化能实现相关系数为98.2%的线性响应,灵敏度可达0.31 d B/(%RH),响应速度快于0.13(%RH)/s,并且具有很好的可重复性。对传感机理的理论分析可以解释实验结果,并且表明这种基于石墨烯的光纤传感器亦可广泛应用于其他种类化学气体的探测。这种全新机理的光学传感器是对石墨烯电化学传感器的一种很好的补充,并将促进石墨烯在化学传感技术中的应用。     

三轴速调管放大器自激振荡诊断

为满足X波段三轴速调管放大器(TKA)各腔内部自激振荡的诊断需求,设计了一种结构简单紧凑、无需外部密封结构的新型波导耦合器。利用小孔耦合原理和CST仿真软件,针对TKA中常见的自激振荡TE61模式,对该耦合器的耦合特性进行了理论分析和仿真设计。结合PIC方法,建立了利用该耦合器诊断TKA同轴漂移管内传输微波频谱特性的物理模型。通过仿真计算,验证了所设计的耦合器用于TKA自激振荡诊断的有效性。