首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   7篇
  免费   1篇
  国内免费   1篇
化学   3篇
力学   1篇
物理学   5篇
  2022年   1篇
  2021年   1篇
  2019年   1篇
  2018年   2篇
  2013年   2篇
  2009年   1篇
  2008年   1篇
排序方式: 共有9条查询结果,搜索用时 15 毫秒
1
1.
三维多孔石墨烯作为一种优异的石墨烯碳材料, 其独特的多孔结构使得材料在具有较大比表面积的同时还保持着足够高的电子迁移率和机械稳定性, 在电子器件中得到了广泛的应用. 本文介绍的激光诱导石墨烯是一种以一步法直接制备得到的三维网状石墨烯材料, 该技术将三维石墨烯的制备和图案化相结合, 无需进行湿化学反应处理, 制作方法更简便, 材料性能更优异. 目前研究主要集中在通过掺杂提高性能和利用转移法实现不同基底器件的制备. 激光诱导石墨烯自身特有的属性如多孔微纳米结构和大的比表面积等使其在超级电容器和传感器等领域拥有较高的应用价值.  相似文献   
2.
介绍了一种基于THGEM的X射线光斑寻迹探测器,用于X射线单光子计量技术研究和测量,探测器有效面积200 mm×200 mm,采用128路基于ASIC和FPGA的高速读出电子学,探测器分为中间高分辨区和外围低分辨区两部分,两部分共用一套读出电子学。实验在中国计量科学研究院利用X光机产生的束线,测试光斑位置、光斑精细分布以及探测器的位置分辨。实验结果表明,探测器实现了同时对光斑寻迹和光斑的精细测量,探测器中间高分辨区x方向的位置分辨率为0.63 mm(FWHM),y方向位置分辨率为0.62mm(FWHM),探测器各项性能指标均达到了预期目标。This paper introduces the detector of X-ray spot tracing based on the THGEM. It is used for X ray single photon measurement technology research and measurement with an effective area of 200 mm×200 mm. The circuit board has 128 array of high speed readout electronics based on ASIC and FPGA. And it is divided into two parts:the middle area of high sensitive and the peripheral area of low sensitive. The two parts share a set of readout electronics. The experiment tests the position and the fine structure of the beam line produced by X ray machine in National Institute of Metrology. The results of the experimental show that the detector realizes both the spot tracing and the fine structure of the spot. The position resolution is 0.63 mm in x direction and 0.62 mm in y direction in high sensitive of the detector, which achieve the desired goal of preliminary design.  相似文献   
3.
探讨以两种新荧光蛋白MiCy,mKo为传能对并应用供体光漂白法测量荧光共振能量转移(FRET)效率.首先通过基因工程方法表达纯化了这两种蛋白,并测量了荧光光谱及光漂白性质,表明MiCy极易光漂白而mKo抗光漂白.进一步以Ni-NTA-agarose为FRET模型,在Confocal上对MiCy进行光漂白时间常数的测量,并计算了FRET效率.结果表明MiCy-mKo传能对适合用供体光漂白法测量FRET效率,此传能对将在蛋白质相互作用研究中有广泛应用.  相似文献   
4.
Jianjin Zhou 《中国物理 B》2022,31(5):50702-050702
In recent years, gas electron multiplier (GEM) neutron detectors have been developing towards high spatial resolution and high dynamic counting range. We propose a novel concept of an Al stopping layer to enable the detector to achieve sub-millimeter (sub-mm) spatial resolution. The neutron conversion layer is coated with the Al stopping layer to limit the emission angle of ions into the drift region. The short track projection of ions is obtained on the signal readout board, and the detector would get good spatial resolution. The spatial resolutions of the GEM neutron detector with the Al stopping layer are simulated and optimized based on Geant4GarfieldInterface. The spatial resolution of the detector is 0.76 mm and the thermal neutron detection efficiency is about 0.01% when the Al stopping layer is 3.0 μ m thick, the drift region is 2 mm thick, the strip pitch is 600 μ m, and the digital readout is employed. Thus, the GEM neutron detector with a simple detector structure and a fast readout mode is developed to obtain a high spatial resolution and high dynamic counting range. It could be used for the direct measurement of a high-flux neutron beam, such as Bragg transmission imaging, very small-angle scattering neutron detection and neutron beam diagnostic.  相似文献   
5.
王伟  周晓娟  季一兵  相秉仁 《分析化学》2013,(10):1566-1570
利用毛细管电泳和分子模拟对磺丁基醚-β-环糊精(SBE-β-CD)在莫达非尼手性拆分中的立体选择性差异进行了研究。考察了环糊精浓度和温度对对映体手性拆分的影响。在15~35℃温度范围内,考察了对映体的保留和分离行为。结果表明,随着温度的升高,手性分离变差,并以lnα对1/T作图,得到的Van’t Hoff曲线具有良好线性关系(r=0.995)。热力学结果表明,此手性拆分过程为焓控过程。在5~50 mmol/L范围内,考察了SBE-β-CD浓度对分离的影响,采用双倒数法求得莫达非尼S-和R-对映体与SBE-β-CD的结合常数分别为58.0和70.6 L/mol。分子模拟实验以Gold对接完成,结果表明,莫达非尼R-对映体相比S-对映体与SBE-β-CD结合更稳定,且两对映体与SBE-β-CD结合的差异主要来源与氢键贡献的差异。  相似文献   
6.
高耸结构柔性较大,对风荷载较为敏感,相比一般风的影响,台风作用下的高耸结构更易产生强烈的动力响应.考虑台风的基本特性,选取合适的台风风速谱,运用数值模拟方法,仿真得到了与结构竖向相关的18条脉动风载时程样本.采用有限元方法建立某高耸钢塔结构的三维有限元模型,并在时域内研究其在台风作用下的动力响应.侧重比较研究了结构线性与非线性对高耸钢塔结构风致动力响应影响,并与采用经典的Davenport谱的计算结果进行了比较.研究表明:同一种风谱计算的风载作用下,考虑几何非线性影响的高耸结构风致位移响应略大于线性情况下的计算结果,但差别不是太大;采用台风风谱计算风致结构动力响应的峰值和均方差比采用Davenport谱的计算结果大得多.  相似文献   
7.
中子小角散射探测器是小角散射(SANS)谱仪的关键设备之一,探测器要求有足够大的探测面积、较高的探测效率及较好的空间分辨率,能够在真空腔中稳定地工作并可在腔体内前后移动。综合考虑,SANS探测器采用120只8 mm直径位置灵敏3He管,组成有效面积1 000 mm(X)×1 020 mm(Y)的二维探测器阵列。探测器阵列分为10个模块,每一个模块功能完全独立,包括12只3He管及其对应的读出电子学和数据获取系统。读出电子学位于探测器背面的回字形密闭腔体内,由CSNS电子学组自主研发。SANS探测器从设计、选型、样机、调试到安装历时三年,中子束流实验结果显示探测器探测效率大于50%(@2Å),空间分辨率好于10 mm(FWHM),完全达到设计要求,目前正在中国散裂中子源小角散射谱仪运行使用。  相似文献   
8.
基于阿基米德定律设计一种测量重力加速度的实验装置,对重力加速度进行测量.通过本实验得到的重力加速与当地重力加速度标准值的相对误差为0.14%,这为实验测量室重力加速度提供一种新方法。  相似文献   
9.
随着脉冲强流中子源的发展,对高性能中子探测器提出了更大的挑战,3He气体资源严重短缺和高计数率中子探测器的迫切需求,已开始制约着中子源应用技术的发展。中国科学院高能物理研究所针对中子的特殊性,专门研发了一种陶瓷基材的nTHGEM(neutron Thick Gaseous Electron Multiplier)探测器用于中子探测。基于nTHGEM的中子探测器具有高计数率、高位置与时间分辨能力、增益大、制作工艺简单,且便于大面积制作的特点,是目前国际上发展替代3He探测技术的重要方向之一。为了详细研究nTHGEM探测器的本身性能,本工作使用55Fe放射源研究了nTHGEM探测器的增益、计数率稳定性、能量分辨率等关键参数与nTHGEM膜间电压、收集场强、漂移场强之间的关系,优化了nTHGEM探测器在不同工作气体中的工作参数,为后续进一步优化nTHGEM探测器设计和工艺奠定了基础。实验结果表明,单层nTHGEM探测器在Ar(90%)+CO2(10%)混合气体中增益能达到103,探测器计数率稳定性良好。另外,还在中国原子能科学研究院的CARR反应堆(China Advanced Research Reactor)上进行了中子束流实验,通过狭缝测量到探测器位置分辨率为(3.01±0.03)mm(FWHM),已经接近高气压3He MWPC中子探测器水平。With the development of pulsed intense neutron source, the high-performance neutron detector poses more challenges. The severe shortage of 3He gas resources and the urgent need of neutron detector with high counting rate have begun to restrict the neutron source application technology development. In response to the particularity of neutrons, the Institute of High Energy Physics of CAS developed a nTHGEM(neutron Thick Gaseous Electron Multiplier)of ceramic substrate for neutron detection. The neutron detector based on nTHGEM is one of the most important directions for the development of alternative 3He detection technology in the world at present because of its high counting rate, high position and time resolution, large gain, simple fabrication process and large area production. In order to study the properties of nTHGEM detector in detail, this paper studied the relationship between nTHGEM detector's gain, counting rate stability, energy resolution and other key parameters and nTHGEM film voltage, collection field strength and drift field strength using 55Fe radioactive source, Optimized the working parameters of nTHGEM detector in different working gases, which laid the foundation for further optimization of nTHGEM detector design and process. The experimental results show that the single-layer nTHGEM detector has a gain of 103 in a Ar(90%)+CO2(10%) mixed gas with good counting rate stability. In addition, a neutron beam experiment was performed on the China Advanced Research Reactor at the China Institute of Atomic Energy, and the position resolution of the detector was (3.01±0.03) mm (FWHM) measured by slits. Its performance is close to the high pressure 3He MWPC neutron detector level.  相似文献   
1
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号