Directing-Group-Free C7-Alkylations of N-Alkylindoles Mediated by Cationic Zirconium Complexes: Role of Brønsted Acid for Catalytic Manifold

Highly position selective alkylations of N-alkylindoles at C7-positions have been enabled by cationic zirconium complexes. The strategy provides a straightforward access to install alkyl groups at C7-positions of indoles without a complex directing group. Mechanistic studies provided support for the importance of Brønsted acids in the catalytic manifold.     

Thermal treatment on composite γ-zirconium phosphate-silica

The prepared amorphous γ-ZrP\SiO₂ composite had a complicated composition, since a part of γ-ZrP is converted to α-form during the exfoliation of it. The γ-ZrP\SiO₂ composite have specific surface area of 421 m²g^–1. The acidic P–OH groups of the lamellae species placed on the surface (it is ≈1.0 meq g^–1), do not destroy until the temperature of 1030 K. During the thermal treatment the total mass loss of 7.79% was found. This value corresponds to 0.42 mole of H₂O per molecule unit. The water loss process was found very slow, because of the placing of bilamellar species in the composite.     

Mossbauer investigations of corrosion environment influence on Fe valence states in oxide films of zirconium alloys

Mössbauer investigations about iron atom redistribution in oxide films of zirconium alloys subjected to corrosion at 500°C in pure oxygen and water pair have been analysed. The alloys were also subjected to autoclave conditions at a pressure of 10.0 MPa and autoclave conditions at 350°C and at a pressure of 16.8 MPa, using distilled water and water with additives of lithium and fluorine. It is shown that, depending on the corrosion environment, various compounds of iron, such as α-Fe₂O₃, Fe₃O₄, and FeO, as solid solutions of iron in ZrO₂ are formed in oxide films.     

Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

Initiation process of L‐lactide polymerization carried out with zirconium(IV) acetylacetonate

Lactide polymerization using zirconium(IV) acetylacetonate [Zr(acac)₄] as an initiator was investigated. In the reaction between Zr(acac)₄ and the monomer molecule, lactide deprotonation and the release of acetylacetone occurred. The structures of the obtained complexes were analyzed with high‐resolution NMR spectroscopy. A computational method was used to calculate the hypothetical structures. The role of the obtained complexes in the initiation of polymerization and the reaction of chain growth was proposed. The influence of the reaction temperature on the structures of the complexes was investigated. Polylactide chain growth proceeded by an insertion‐coordination mechanism. The polymer chain grew on one ligand, which was formed in advance from a deprotonated lactide. The molecular masses of the obtained polymers were the same as the theoretical masses and were directly proportional to the reaction conversion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1886–1900, 2004     

纯锆上离子注入钇和镧后的表面分析

用金属蒸汽真空弧源，以40kV加速电压对纯锆样品分别进行了10¹⁶—10¹⁷/cm²的钇、镧离子注入，注入温度约为130℃.然后对注入样品进行表面分析.x射线光电子能谱分析表明，注入的钇以Y₂O₃形式存在，镧以La₂O₃形式存在.俄歇电子能谱表明，纯锆基体表面的氧化膜厚度随着离子注入剂量的增加而增加，当离子注入剂量达到10¹⁷/cm²时，氧化膜的厚度达到了最大值.卢瑟福背散射显示镧层的厚度约为30nm，同时直接观察到当离子注入剂量为(La+Y)10¹⁷/cm²时，纯锆样品表面发生了严重的溅射. 关键词： 纯锆 钇和镧离子共注入 卢瑟福背散射 x射线光电子能谱     

Asymmetric Baeyer—Villiger oxidation: control of stereoelectronic demand

The recent development of asymmetric Baeyer—Villiger oxidation of prochiral and racemic ketones is briefly summarized, focusing on the regio- and stereocontrol of the oxidation attained by regulating the stereoelectronic demand in the step of rearrangement of the Criegee intermediate.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1784–1794, September, 2004.     

二(三甲硅基环戊二烯基)二氯合锆的合成和晶体结构

在 THF中 ,通过三甲硅基环戊二烯基锂与四氯化锆反应合成了标题化合物 ,经元素分析 ,IR和 1 H NMR谱表征了其结构 ,并用 X-射线衍射测定了晶体结构 ,该晶体属于三斜晶系 ,空间群为 P1 ,晶体学参数 :a=0 .6787(6) ,b=1 .2 92 4 (2 ) ,c=1 .30 34(2 ) nm,α=67.83(1 ) ,β=82 .50 (3) ,γ=75.64 (3)°,V=1 .0 2 5nm3 ,Z=2 ,Dx=1 .41 5 g· cm-3 ,μ=8.989cm-1 ,F (0 0 0 ) =448,R=0 .0 32。质谱研究表明 ,化合物在质谱过程中发生二聚 C*p2 ZrClZr C*P2Cl(C*P=C5H4Si Me3 )。