Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Laser vaporization: A versatile method for studying metal clusters

Vaporizing solid samples of metals and semiconductors with a YAG Laser is a method well suited for producing molecules and clusters of those materials. The clusters are examined by either laser-induced fluorescence (LIF) or mass spectroscopic methods. The technique is valuable for both gas phase and matrix studies. The method is described and some applications, studying either the structure of small metal molecules or their reactions, are reviewed, with emphasis on our recent results from the LIF studies of LiBe, Al₂ and the reaction of Al with oxygen, yielding A1₂O. For larger clusters, Ion Cyclotron Resonance is an extremely valuable method, as we demonstrate by its application to the reactions of small charged silicon clusters with strong oxidising agents.     

断续喷洒去溶电热雾化法在电感耦合等离子体原子发射光谱方法中的应用研究

本文所讨论的电热雾化法是采用继续喷洒去溶技术,使试样在石墨炉表面逐步积累的进样方法。文章简要介绍了实验条件的选择和控制以及石墨炉装置的结构,探讨了提高电热雾化法相对检测能力的途径。实验结果表明:谱线黑度值与试样积累时间的对数值之间具有较好的线性关系。     

华中五味子挥发性成份的研究

华中五味子有收敛、止咳、止汗、止泻、活血和健胃等作用。近年来已分离到约15种非挥发性成份,但关于它的挥发性成份迄今未见报道。我们用毛细管气相色谱法分离出     

Thermochemistry of aromatic ketones. Experimental enthalpies of formation and structural effects

The standard enthalpies of formation Δ_fH^o (liq. or cr.) at the temperature T = 298.15 K were measured using combustion calorimetry for benzophenone (A), 1-indanone (B), -tetralone (C), 9-fluorenone (D), anthrone (E) and dibenzosuberone (F). The standard enthalpies of vaporization Δ_vH^o or sublimation Δ_sH^o of A-F and 5,7-dihydro-6H-dibenzo[a,c]cyclohepten-6-one (G) were obtained from the temperature function of the vapor pressure measured in a flow system. Enthalpies of fusion Δ_mH of solid compounds were measured by DSC. From the enthalpies of formation of the gaseous compounds of A-G the values of their strain enthalpies were derived and structural effects discussed.

     

Mechanistic Aspects of Carbon Nanotube Nucleation and Growth

The discovery, synthesis, characterization, and applicability of carbon nanotubes have produced tremendous excitement and interest among scientists and engineers. In particular, the use of these unique tubular nanostructures for new strong lightweight materials, nanoelectronics, fuel storage and cells, electron emitters and bio, scanning probe microscopy, and chemical sensing devices has created an intense effort to advance the synthesis so as to mass produce carbon nanotubes with control over diameter and helicity. The massive and controlled synthesis of this heralded nanostructure has been a great challenge. Although significant progress has advanced the preparation, more synthetic development is required. The syntheses have so far involved three main approaches: arc discharge vaporization, laser vaporization, and catalytic chemical vapor deposition. The synthetic trend has progressed to a point where further advancement with these techniques will require a better understanding of the mechanism of nucleation and growth. The mechanics of carbon nanotube nucleation and growth involve very complex and diverse phenomena occurring under extreme conditions and on the mesoscopic scale. As yet the detail mechanism is unknown. Difficulties with experimental probing and computational simulation have increased the mystery of this mechanism. This review presents an account of research on the synthesis of carbon nanotubes and the mechanism of formation. This overview includes all three mentioned synthetic approaches and hybrids thereof. On the basis of this broad account a comprehensive mechanism for carbon nanotube nucleation and growth naturally arises. This mechanism is qualitative and it hopes to inspire more quantitative exploration and synthetic advancement.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

Effect of combining rules for cubic equations of state on the prediction of double retrograde vaporization

In this work, the phenomenon of double retrograde vaporization (DRV) is simulated using the Peng–Robinson equation of state with the classical mixing rules and several combining rules for the cross-energy and cross-co-volume parameters. The binary interaction parameters are set equal to zero in all cases, i.e., the calculations are entirely predictive. An interesting conclusion is that the predictions using the classical combining rules (geometric mean rule for a_ij and arithmetic mean rule for b_ij) provide the best agreement with the experimental data for all the systems tested: methane + n-butane, methane + n-pentane, ethane + limonene, and ethane + linalool. Another interesting observation is that several combining rules for b_ij, other than the arithmetic mean rule, predict the existence of three phases in equilibrium in a very narrow temperature range close to the critical temperature of methane in the methane + n-pentane system, even though, literature data indicates that n-hexane is the first n-alkane to present partial liquid phase immiscibility with methane.     

Thermochemical study of aliphatic and phenyl-substituted geminal diacetates

The standard enthalpies of combustion _c H ^o of aliphatic diacetates1 and aromatic diacetates2 were measured calorimetrically. The enthalpies of vaporization _vap H ^o or sublimation _sub H ^o of1 and2 were obtained from the temperature function of the vapor pressure measured in a flow system. From _f H ^o(g) of1 and2 new values of group increments for the estimation of standard enthalpies of formation of these classes of compounds were derived. The geminal interaction energy between the geminal acyloxy groups shows no anomeric stabilization.Geminal Substituent Effects, Part 12, for part 11 see Ref. 7.     

ICP-AES detection of silicon carbide impurities volatilized in a graphite furnace with the use of carbon tetrachloride vapour

The analytical capability of high-temperature halogenation with carbon tetrachloride vapour in a graphite furnace was investigated for silicon carbide powder with known chemical composition and particle size. Intensity vs heating time curves were determined for analytical lines of Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ti, V and Si constituents, volatilized with and without the presence of CCl₄ vapour in the furnace atmosphere. Igniting 10 mg SiC at 2100 °C for 60 s in chlorinating atmosphere, the evaporated fraction of most of the constituents was higher than 90% (for Al about 50%). The line intensity vs sample mass (4–26 mg) relationships were linear for all impurities studied, while the intensity of silicon line showed a relatively small change with the sample mass. BEC (background equivalent concentration) values for this solid sampling technique (10 mg loaded sample) were 2–20 fold lower than those calculated for the conventional solution sample introduction method.