The mechanism of ethylene polymerization by nickel salicylaldiminato catalysts - Agostic interactions and their kinetic isotope effects

The ethylene polymerization reaction of a neutral nickel catalyst was studied by DFT calculations at the Becke3LYP/6-31G(d) level of theory. As in related cases a β-agostic bond stabilizes the nickel alkyl ground states. Transition states for the insertion of the olefin show a distinct α-agostic interaction, which has not been observed for late metal polymerization catalysts before. An ethylene-alkyl complex was identified as the resting state of the reaction. The overall barrier height of the reaction amounts to 17.54 kcal/mol, which slightly increases to 17.60 kcal/mol for the polymerization of deuterated ethylene. Therefore, a small positive kinetic isotope effect (k_H/k_D = 1.09) can be calculated, which is caused by the α-agostic interaction in the transition state. A comparison to other late metal based polymerization systems reveals that the ethylene coordination step of highly active catalysts is significantly lower in energy compared to catalysts which are only moderately active.     

U：CaF2晶体的分凝特性与光谱性质

应用TGT法生长了直径为75mm的U：CaF2晶体，宏观上透明完整.应用公式K0=Cs/Cl计算了U在CaF2晶体中的分凝系数等于0.53.应用溶质分布一般公式Cs=K0C0(1-g)K0-1，计算U的浓度分布与测量值，数值符合说明晶体生长过程接近平衡状态.分析不同条件下生长的U: CaF2晶体的晶胞参数和吸收光谱，结果表明生长气氛决定U的价态及电荷补偿机理：无PbF2存在的条件下，U为+4价，晶体呈绿色；PbF2的加入起到氟化去氧作用，U倾向于以离子半径最接近于Ca2+的U3+存在，晶体呈红色.从晶体生长开始到结束的部位，U3+:CaF2晶体吸收光谱的峰位不变，峰强呈现与U浓度相同的增加趋势.U3+:CaF2晶体外层厚约5mm处呈黄色，含有U3+和U2+的混合价态离子，其原理是石墨坩埚的还原作用通过单质铅，使部分的U3+进一步还原成了U2+. 关键词： 铀 氟化钙晶体 分凝系数 晶胞参数     

Synthesis and characterization of isotopically enriched methylmercury (CH3201Hg+)

A simple procedure for the synthesis of an important standard, isotopically enriched methylmercury, which is not commercially available, has been established successfully. The isotopically enriched standard synthesized is utilized in conventional isotope dilution mass spectrometry (IDMS), as well as in speciated IDMS (SIDMS), for determination of the true concentration of methylmercury in environmental samples. The CH₃²⁰¹Hg⁺ standard has been synthesized from commercially available ²⁰¹HgO and tetramethyltin. The synthesis time required is 1 h at 60°C. The product is highly pure, yielding more than 90% as ²⁰¹Hg in CH₃²⁰¹Hg⁺. Hazardous dimethylmercury does not occur during this synthesis procedure. The product synthesized was analyzed using high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP‐MS) and ICP‐MS alone in order to determine its concentration, isotopic composition and purity. The stability of the product was also evaluated for over 6 months and found to be stable at 4°C in the dark. The isotopically enriched methylmercury synthesized can be used in SIDMS and IDMS analyses as a standard. Copyright © 2003 John Wiley & Sons, Ltd.     

Transesterification of an RNA model in buffer solutions in H2O and D2O

Transesterification of a phosphodiester bond of RNA models has been studied in various buffer solutions, under neutral and slightly alkaline conditions in H₂O and D₂O. The results show that imidazole is the only buffer system where a clear buffer catalysis on the cleavage of a phosphodiester bond is observed. The rate enhancement in sulphonic acid buffers is smaller, and a sulphonate base, particularly, is inactive as a catalyst. The rate‐enhancing effect of imidazole is, however, catalytic, and the catalytic inactivity of sulphonate buffers can be attributed to their structure and/or charge. The catalysis by imidazole is a complex system which, in addition to first‐order reactions, involves a process that shows a second‐order dependence in imidazole concentration. The latter reaction becomes significant in acidic imidazole buffers (pH < pK_a), as the buffer concentration increases. The kinetic solvent deuterium isotope effect k_H/k_D, referring to first‐order catalysis by imidazole base, is 2.3 ± 0.3. That referring to second‐order catalysis is most probably much larger, but an accurate value could not be obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Microchemical Investigation of Archaeological Copper Based Artefacts Disclosing an Ancient Witness of the Transition from the Value of the Substance to the Value of the Appearance

In many Italian archaeological sites dated between the sixth and third centuries BC, unworked lumps of Cu-based materials are sometimes found, the so called Aes Rude, which according to archaeological considerations were appreciated as currency, as a medium of exchange and as a form of saving. The microchemical investigation of these ancient artefacts discloses their nature as apparently not usable for any functional applications or possible use. Indeed, Aes Rude resemble ordinary copper material, but microchemical results indicate that they are constituted by highly ferruginous leaded copper, making them useless for producing other metal objects by means of casting or hot and cold working. Notwithstanding this intrinsic negative feature, the production of these intractable Cu-based alloys was deliberately carried out to maximise the process yield in terms of produced metal from an impure and unselected metal ore by tailoring the smelting process parameters. With these considerations in mind, the microchemical investigation of these ancient iron–copper alloys gives evidence of the passage from the acceptance of an artefact value based on its true nature or potential use to the acceptance of the value based only on its appearance or form irrespective of its present or future use. This information could contribute to a better understanding of the evolution of human thought and economic and social interactions.     

600MeV ~(18)O+~(nat)Pb(厚靶)系统生成Hg同位素独立产额测量(Ⅱ)结果与分析

报道了600MeV（18）O轰击（nat）Ph（厚靶）生成的质量数在180—209之间的Hg同位素产物独立截面的测量结果．通过与600MeV质子轰击天然铅靶生成Hg同位素产额分布的比较，讨论了几个质量区段Hg同位素的生成机制．测量结果也与相对论重离子碎裂反应双质子移出道的产额分布进行了比较．结果表明，中能重离子与中子较富集靶核组成的反应系统对生成丰中子类靶余核具有较明显的优势．     

利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

磷酸三丁酯从硝酸介质中萃取铀（Ⅵ）的动力学研究

用上升单液滴法和恒界面池法研究了磷酸三丁酯-环己烷从硝酸介质中萃取铀(Ⅵ)的动力学。萃取过程为扩散控制,得到了在扩散控制下影响萃取速率的一些规律。