白色荧光粉CaF2∶Yb3+/Eu3+/La3+的制备及其上转换发光特性

采用改进的两步高温固相熔融法制备了Yb^3+、Eu^3+、La^3+共掺杂CaF 2的上转换荧光粉。基于荧光猝灭原理,通过改变La^3+掺杂浓度来调节CaF 2∶Yb^3+/Eu^3+材料的发光性能,并在980 nm近红外光激发下,获得了该材料的白色上转换发光(UCL)。在该发光体系中,Yb^3+不仅起到了敏化Eu^3+的作用,同时,Yb^3+二聚体(Yb^3+-dimer)自身合作发出波长范围480~540 nm的绿色荧光。而白光三基色中的绿光正是来自Yb^3+二聚体的合作发光。Eu^3+则作为激活剂,同时发出红色和蓝色荧光。荧光寿命测试结果表明Yb^3+-dimer与Eu^3+之间存在有效的能量传递。值得注意的是,在980 nm激光激发下,1%La^3+掺杂的样品表现出最佳的红、绿、蓝三基色光比列,实现了材料的上转换白光发射,其色度坐标为(0.311,0.340)。     

改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.     

Lanthanide‐Doped Nanocrystals: Strategies for Improving the Efficiency of Upconversion Emission and Their Physical Understanding

The fundamental understanding of lanthanide‐doped upconverted nanocrystals remains a frontier area of research because of potential applications in photonics and biophotonics. Recent studies have revealed that upconversion luminescence dynamics depend on host crystal structure, size of the nanocrystals, dopant concentration, and core–shell structures, which influence site symmetry and the distribution and energy migration of the dopant ions. In this review, we bring to light the influences of doping/co‐doping concentration, crystal phase, crystal size of the host, and core–shell structure on the efficiency of upconversion emission. Furthermore, the lattice strain, due to a change in the crystal phase and by the core–shell structure, strongly influences the upconversion emission intensity. Analysis suggests that the local environment of the ion plays the most significant role in modification of radiative and nonradiative relaxation mechanisms of overall upconversion emission properties. Finally, an outlook on the prospects of this research field is given.     

Tuning the Upconversion Luminescence Lifetimes of KYb2F7:Ho3+ Nanocrystals for Optical Multiplexing

Conventional luminescent color coding is limited by spectral overlap and the interference of background fluorescence, thus restricting the number of distinguishable identities that can be used in practice. Here, we demonstrate the possibility of generating diverse time‐domain codes, specially designed for a single emission band, using lanthanide‐doped upconversion nanocrystals. Based on the knowledge of concentration quenching, the upconversion luminescence kinetics of KYb₂F₇: Ho³⁺ nanocrystals can be precisely controlled by modifying the dopant concentration of Ho³⁺ ions, resulting in a tunable emission lifetime from 75.8 to 1944.5 μs, which suggests the practicality of these time‐domain codes for optical multiplexing.     

Stabilization of High Oxidation State Upconversion Nanoparticles by N‐Heterocyclic Carbenes

The stabilization of high oxidation state nanoparticles by N‐heterocyclic carbenes is reported. Such nanoparticles represent an important subset in the field of nanoparticles, with different and more challenging requirements for suitable ligands compared to elemental metal nanoparticles. N‐Heterocyclic carbene coated NaYF₄:Yb,Tm upconversion nanoparticles were synthesized by a ligand‐exchange reaction from a well‐defined precursor. This new photoactive material was characterized in detail and employed in the activation of photoresponsive molecules by low‐intensity near‐infrared light (λ =980 nm).     

Complementary Lock‐and‐Key Ligand Binding of a Triplet Transmitter to a Nanocrystal Photosensitizer

Owing to the difficulty in comprehensively characterizing nanocrystal (NC) surfaces, clear guidance for ligand design is lacking. In this work, a series of bidentate bis(pyridine) anthracene isomers (2,3‐PyAn, 3,3‐PyAn, 2,2‐PyAn) that differ in their binding geometries were designed to find the best complementary fit to the NC surface. The efficiency of triplet energy transfer (TET) from the CdSe NC donor to a diphenylanthracene (DPA) acceptor mediated by these isomers was used as a proxy for the efficacy of orbital overlap and therefore ligand binding. 2,3‐PyAn, with an intramolecular N–N distance of 8.2 Å, provided the best match to the surface of CdSe NCs. When serving as a transmitter for photon upconversion, 2,3‐PyAn yielded the highest upconversion quantum yield (QY) of 12.1±1.3 %, followed by 3,3‐PyAn and 2,2‐PyAn. The TET quantum efficiencies determined by ultrafast transient absorption measurements showed the same trend.     

Ultrafast Fluorescence Spectroscopy via Upconversion and Its Applications in Biophysics

In this review, the experimental set-up and functional characteristics of single-wavelength and broad-band femtosecond upconversion spectrophotofluorometers developed in our laboratory are described. We discuss applications of this technique to biophysical problems, such as ultrafast fluorescence quenching and solvation dynamics of tryptophan, peptides, proteins, reduced nicotinamide adenine dinucleotide (NADH), and nucleic acids. In the tryptophan dynamics field, especially for proteins, two types of solvation dynamics on different time scales have been well explored: ~1 ps for bulk water, and tens of picoseconds for “biological water”, a term that combines effects of water and macromolecule dynamics. In addition, some proteins also show quasi-static self-quenching (QSSQ) phenomena. Interestingly, in our more recent work, we also find that similar mixtures of quenching and solvation dynamics occur for the metabolic cofactor NADH. In this review, we add a brief overview of the emerging development of fluorescent RNA aptamers and their potential application to live cell imaging, while noting how ultrafast measurement may speed their optimization.     

局域结构依赖的稀土上转换发光

稀土掺杂上转换发光纳米材料作为一种新型的荧光材料,因其发光性能优异、化学性质稳定以及自发荧光干扰小等优点受到国内外研究者的广泛关注。如何实现稀土上转换发光性能的可控调节一直是稀土纳米发光材料研究中的一个热点问题。简要总结了近年来关于局域结构依赖的稀土上转换发光性能的研究进展,分别从结构设计和晶体结构调节两个方面展开,主要内容包括核壳结构、复合结构和孔洞结构的设计对稀土上转换发光性能的影响及晶体结构对稀土上转换发光强度和上转换发光红绿比的影响,以期为制备高质量、可定制上转换发光性质的稀土掺杂纳米发光材料提供参考。