DFT modeling of indoline spiropyrans with a cationic substituent in the gas phase

Isomeric forms of indoline spiropyrans show unusual behavior compared with similar compounds, according to experimental data. DFT modeling for gas phase was made to consider the simplest case without environmental effects, which revealed the intramolecular reasons for occurrence of ring opening reaction depending on the particular structure of the compound. The questions of charge redistributions, the changes of geometry and chemical bonds in the structures are also discussed.     

[Nb@Ge13/14]3−: New Family Members of Ge-Based Intermetalloid Clusters

During the past two decades, single-atom-centered medium-sized germanium clusters [M@Ge_n] (M=transition metals, n>12) have been extensively explored, both from theoretical perspectives and experimental gas-phase syntheses. However, the actual structural arrangements of the Ge₁₃ and Ge₁₄ endohedral cages are still ambiguous and have long remained an unresolved problem for experimental implementation. In this work, we successfully synthesize 13-/14-vertex Ge clusters [Nb@Ge₁₃]³⁻ ( 1 ) and [Nb@Ge₁₄]³⁻ ( 2 ), which are structurally characterized and exhibit unprecedented topologies, neither classical deltahedra nor 3-connected polyhedral structures. Theoretical analysis indicates that the major stabilization of the Ge backbones arises due to the substantial interaction of Ge 4p-AOs with the endohedral Nb 4d-AOs through three/four-center two-electron bonds with an enhanced electron density accumulated over the shortest Nb−Ge13 contact in 1 . Low occupancies of the direct two-center two-electron (2c–2e) Nb−Ge and Ge−Ge σ bonds point to a considerable degree of electron delocalization over the Ge cages revealing their electron deficiency.     

Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains

Hexagonal boron nitride (BN) platelets, also known as white graphite, are often used to improve the thermal conductivities of polymeric matrices. Due to the poor interfacial compatibility between BN platelets and polymeric matrices, in this study, polyrhodanine (PRd) was used to modify BN platelets and prepared functionalized BN-PRd platelets, thereby enhancing the interfacial interaction between the thermal conductive filler and polymeric matrix. Then, BN-PRd platelets were dispersed into the nitrile butadiene rubber (NBR) matrix to yield high thermally conductive composites. The presence of N? C═S groups in PRd allowed the combination of PRd and NBR chains containing stable covalent bonds via vulcanization reaction. The thermal conductivity of the as-prepared 30 vol% BN-PRd/NBR composite reached 0.40 W/mK, representing an increment of 135% over pure NBR (0.17 W/mK). In addition, the largest tensile strength of NBR composite containing 30 vol% BN-PRd platelets was 880% times of pure NBR. The 30 vol% BN-PRd/NBR composite also displayed a relatively high dielectric constant (9.35 at 100 Hz) and a low dielectric loss tangent value (0.07 at 100 Hz), indicating their usefulness as dielectric flexible materials of microelectronics. In sum, the simplicity and good efficiency of formation of covalent bonds between boron nitride and rubber chains look very promising for large-scale industrial production of high thermally conductive composites.     

Phosphine‐Stabilized Diiododiborenes: Isolable Diborenes with Six Labile Bonds

The lability of B=B, B?P, and B–halide bonds is combined in the syntheses of the first diiododiborenes. In a series of reactivity tests, these diiododiborenes undergo cleavage of all six of their central bonds in different ways, leading to products of B=B hydrogenation and dihalogenation as well as halide exchange.     

High Blocking Temperature of Magnetization and Giant Coercivity in the Azafullerene Tb2@C79N with a Single‐Electron Terbium–Terbium Bond

The azafullerene Tb₂@C₇₉N is found to be a single‐molecule magnet with a high 100‐s blocking temperature of magnetization of 24 K and large coercivity. Tb magnetic moments with an easy‐axis single‐ion magnetic anisotropy are strongly coupled by the unpaired spin of the single‐electron Tb?Tb bond. Relaxation of magnetization in Tb₂@C₇₉N below 15 K proceeds via quantum tunneling of magnetization with the characteristic time τ_QTM=16 462±1230 s. At higher temperature, relaxation follows the Orbach mechanism with a barrier of 757±4 K, corresponding to the excited states, in which one of the Tb spins is flipped.     

Polypyridine-Based Helical Amide Foldamer Channels: Rapid Transport of Water and Protons with High Ion Rejection

Synthetic strategies that enable rapid construction of covalent organic nanotubes with an angstrom-scale tubular pore remain scarcely reported. Reported here is a remarkably simple and mild one-pot polymerization protocol, employing POCl₃ as the polymerization agent. This protocol efficiently generates polypyridine amide foldamer-based covalent organic nanotubes with a 2.8 nm length at a yield of 50 %. Trapping single-file water chains in the 2.8 Å tubular cavity, rich in hydrogen-bond donors and acceptors, these tubular polypyridine ensembles rapidly and selectively transport water at a rate of 1.6×10⁹ H₂O⋅S⁻¹⋅channel⁻¹ and protons at a speed as fast as gramicidin A, with a high rejection of ions.     

Manipulating Light-Induced Dynamic Macro-Movement and Static Photonic Properties within 1D Isostructural Hydrogen-Bonded Molecular Cocrystals

Smart molecular crystals with light-driven mechanical responses have received interest owing to their potential uses in molecular machines, artificial muscles, and biomimetics. However, challenges remain in control over both the dynamic photo-mechanical behaviors and static photonic properties of molecular crystals based on the same molecule. Herein, we show the construction of isostructural co-crystals allows their light-induced cracking and jumping behaviors (photosalient effect) to be controlled. Hydrogen-bonded co-crystals from 4-(1-naphthylvinyl)pyridine ( NVP ) with co-formers (tetrafluoro-4-hydroxybenzoic acid ( THA ) and tetrafluorobenzoic acid ( TA )) crystallize as isostructural crystals, but have different static and dynamic photo-mechanical behaviors. These differences are due to alternations in the orientation of NVP and hydrogen-bonding modes of the co-formers. After light activation, the 1D NVP-TA crystal splits and shears off within 1 s. For NVP-THA , its photostability and high quantum yield give novel photonic properties, including low optical waveguide loss, highly polarized anisotropy, and efficient up-conversion fluorescence.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

Application of ultrasound-assisted physical mixing treatment improves in vitro protein digestibility of rapeseed napin

The in vitro protein digestibility (IVPD) of napin was studied using different pretreatment methods, including ultrasound, mixing napin with lactalbumin, and ultrasound-assisted protein mixing. The relationships between IVPD, molecular structure, and disulfide bonds were explored, showing that the IVPD of napin was the highest compared with the control when treated with 40% ultrasound power. When the proportion of napin to lactalbumin was 5:5, a synergistic influence between the two proteins was observed. Further investigation showed that the IVPD of napin was clearly improved by treatment with ultrasound-assisted protein mixing. Compared with the single protein in the control, the β-sheet content in the secondary structure of the mixed protein after sonication was reduced from 45.02% to 37.16%. The ordered protein structure was also disrupted by ultrasound, as supported by fluorescence intensity and surface hydrophobicity analyses. The decreased number of disulfide bonds and conformational changes indicated that the IVPD of rapeseed napin was closely related to the disulfide bond content. This study provides a theoretical basis for improving protein digestibility by combining ultrasound with physical mixing.     

Specificity of Furanoside–Protein Recognition through Antibody Engineering and Molecular Modeling

Recognition of furanosides (five‐membered ring sugars) by proteins plays important roles in host–pathogen interactions. In comparison to their six‐membered ring counterparts (pyranosides), detailed studies of the molecular motifs involved in the recognition of furanosides by proteins are scarce. Here the first in‐depth molecular characterization of a furanoside–protein interaction system, between an antibody (CS‐35) and cell wall polysaccharides of mycobacteria, including the organism responsible for tuberculosis is reported. The approach was centered on the generation of the single chain variable fragment of CS‐35 and a rational library of its mutants. Investigating the interaction from various aspects revealed the structural motifs that govern the interaction, as well as the relative contribution of molecular forces involved in the recognition. The specificity of the recognition was shown to originate mainly from multiple CH–π interactions and, to a lesser degree, hydrogen bonds formed in critical distances and geometries.