Parameter settings in a compact laser-nitriding system for titanium composed of a focused pulsed Nd:YAG laser and nitrogen gas blow

The aim of the present study was to form a nitride layer on a titanium (Ti) substrate through a compact laser-nitriding system comprising a focused pulsed Nd:YAG laser and nitrogen gas blow. To obtain a high-quality layer, the effects of pulse frequency and gas flow rate on the surface characteristics were investigated by using plasma emission analysis as well as X-ray analyses. Optical emission spectra from the laser-induced plasma mainly consisted of ionic Ti lines, and their intensities when the pulse frequency was 15 Hz were much higher than those for 8 Hz. Similarly, the reflections from the δ-TiN phase in the X-ray diffraction (XRD) pattern were enhanced when using 15 Hz. On the other hand, the flow rate of nitrogen gas blow had a significant effect on the thickness of the thin oxide layer that formed above the nitride layer. Using a lower flow rate resulted in the formation of a thicker oxide layer. The higher pulse frequency and the faster flow rate were beneficial for obtaining a higher-quality layer because of the enhancement of nitridation and the suppression of oxidation, respectively.     

Synthesis and Diverse Transformations of a Dinitrogen Dititanium Hydride Complex Bearing Rigid Acridane-Based PNP-Pincer Ligands

Studies on N₂ activation and transformation by transition metal hydride complexes are of particular interest and importance. The synthesis and diverse transformations of a dinitrogen dititanium hydride complex bearing the rigid acridane-based ^acriPNP-pincer ligands {[(^acriPNP)Ti]₂(μ₂-η¹:η²-N₂)(μ₂-H)₂} are presented. This complex enabled N₂ cleavage and hydrogenation even without additional H₂ or other reducing agents. Furthermore, diverse transformations of the N₂ unit with a variety of organometallic compounds such as ZnMe₂, MgMe₂, AlMe₃, B(C₆F₅)₃, PinBH, and PhSiH₃ have been well established at the rigid ^acriPNP-ligated dititanium framework, such as reversible bonding-mode change between the end-on and side-on/end-on fashions, diborylative N=N bond cleavage, the formal insertion of two dimethylaluminum species into the N=N bond, and the formal insertion of two silylene units into the N=N bond. This work has revealed many unprecedented aspects of dinitrogen reaction chemistry.     

The Impacts of Crystalline Structure and Different Surface Functional Groups on Drug Release and the Osseointegration Process of Nanostructured TiO2

In implantable materials, surface topography and chemistry are the most important in the effective osseointegration and interaction with drug molecules. Therefore, structural and surface modifications of nanostructured titanium dioxide (TiO₂) layers are reported in the present work. In particular, the modification of annealed TiO₂ samples with —OH groups and silane derivatives, confirmed by X-ray photoelectron spectroscopy, is shown. Moreover, the ibuprofen release process was studied regarding the desorption-desorption-diffusion (DDD) kinetic model. The results proved that the most significant impact on the release profile is annealing, and further surface modifications did not change its kinetics. Additionally, the cell adhesion and proliferation were examined based on the MTS test and immunofluorescent staining. The obtained data showed that the proposed changes in the surface chemistry enhance the samples’ hydrophilicity. Moreover, improvements in the adhesion and proliferation of the MG-63 cells were observed.     

Investigating the kinetics of liquid-free,OSDA-free ZSM-5 zeolite synthesis from iron ore tailings

In this study, ZSM-5, which is a Mobil-type five-type zeolite with well-defined crystal morphology, is successfully synthesized via a seed-assisted, liquid-free method that uses iron ore tailings as a silica source. The ZSM-5 crystallization kinetics at 423, 433, and 443 K and different synthesis times are investigated to identify the nucleation and crystallization mechanisms of the synthesized ZSM-5 zeolites, and results suggest that the crystallization kinetics follow a Kolmogorov-Johnson-Mehl-Avrami-type behavior. The activation energies for the induction and transition periods are 112.38 and 58.35 kJ mol⁻¹, respectively. Furthermore, the Avrami exponent indicates three-dimensional crystal growth from both sporadic and instantaneous nucleation mechanisms. A comparison of our results with previous reports of the ZSM-5 crystallization mechanism demonstrates that the seed crystals play a significant role in nucleation and crystal growth. Finally, seed surface crystallization and new nuclei crystallization dual mechanism has been proposed to describe the crystallization process of ZSM-5.     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

Titanium Dioxide-Yttrium(III)-Oxide Composite Based Cataluminescence Gas Sensor for Fast Detection of Propylene Oxide

By using nano TiO₂-Y₂O₃ as catalyst, cataluminescence (CTL) phenomenon of propylene oxide (PO) was studied, and it was found that the sensor has high sensitivity and good selectivity for the detection of propylene oxide. The common volatile organic compounds (VOCs) such as acetone, acetaldehyde and benzene show no response to the catalysis of TiO₂-Y₂O₃. Based on this phenomenon, a propylene oxide CTL sensor was designed. The ratio of TiO₂ and Y₂O₃ and the annealed temperatures of the composites were optimized. It was found that when the mass ratio of TiO₂ and Y₂O₃ was 1:3 and the annealed temperature was 500 °C, the catalytic materials showed the best performance. 0.3 L min^?1 of carrier gas flow rate, 490 nm of detection wavelength and 197 °C of working temperature were selected as the optimal working conditions, and under the optimized conditions, the quantitative analysis was performed and CTL intensity was linearly correlated with PO concentration from 4.5 mg L^–1 to 1375 mg L^–1 with a detection limit (3σ) of 1.25 mg L^–1. The sensor was used for quantitative analysis and real-time monitoring of propylene oxide residues in fumigation cereals. The result was consistent with that analyzed by gas chromatography. The CTL sensor proposed here had many merits such as high sensitivity, rapidity and simple operation and had potential application prospects in the rapid detection of propylene oxide in food. At last, the mechanism of catalytic oxidation of PO was discussed as well.     

Preparation,characterization, and assessment of cytotoxicity,antioxidant, antibacterial,antifungal, and cutaneous wound healing properties of titanium nanoparticles using aqueous extract of Ziziphora clinopodioides Lam leaves

In recent decades, nanotechnology is growing rapidly owing to its widespread application in science and industry. The aim of the experiment was chemical characterization and evaluation of cytotoxicity, antioxidant, antibacterial, antifungal, and cutaneous wound healing activities of titanium nanoparticles using aqueous extract of Ziziphora clinopodioides Lam leaves (TiNPs@Ziziphora). These nanoparticles were characterized by fourier transformed infrared spectroscopy (FT‐IR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDS), and UV–visible spectroscopy. The synthesized TiNPs@Ziziphora had great cell viability dose‐dependently (Investigating the effect of the plant on human umbilical vein endothelial cells (HUVECs) cell line) and revealed this method was nontoxic. Then, 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) free radical scavenging test was done to assess the antioxidant properties, which indicated similar antioxidant potentials for TiNPs@Ziziphora and butylated hydroxytoluene. Agar diffusion tests were applied to determine the antibacterial and antifungal characteristics. Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC), and Minimum Fungicidal Concentration (MFC) were specified by macro‐broth dilution assay. The data were analyzed by SPSS 21 software (Duncan post‐hoc test). TiNPs@Ziziphora indicated higher antibacterial and antifungal effects than all standard antibiotics (p ≤ 0.01). Also, TiNPs@Ziziphora inhibited the growth of all bacteria at 2‐16 mg/ml concentrations and removed them at 2‐32 mg/ml concentrations (p ≤ 0.01). In case of antifungal properties of TiNPs@Ziziphora, they prevented the growth of all fungi at 2‐8 mg/ml concentrations and destroyed them at 2‐16 mg/ml concentrations (p ≤ 0.01). In vivo experiment, after creating the cutaneous wound, the rats were randomly divided into six groups: untreated control, treatment with Eucerin basal ointment, treatment with 3% tetracycline ointment, treatment with 0.2% TiO₂ ointment, treatment with 0.2% Z. clinopodioides ointment, and treatment with 0.2% TiNPs@Ziziphora ointment. These groups were treated for 10 days. For histopathological and biochemical analysis of the healing trend, a 3 × 3 cm section was prepared from all dermal thicknesses at day 10. Use of TiNPs@Ziziphora ointment in the treatment groups substantially reduced (p ≤ 0.01) the wound area, total cells, neutrophil, and lymphocyte and remarkably raised (p ≤ 0.01) the wound contracture, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte, and fibrocytes/fibroblast rate compared to other groups. In conclusion, the results revealed the useful non‐cytotoxic, antioxidant, antibacterial, antifungal, and cutaneous wound healing effects of TiNPs@Ziziphora.     

Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

The catalytic activity of alkali metal alkoxides and titanium alkoxides in the hydrosilylation of unfunctionalized olefins

The catalytic activities of titanium alkoxides and alkali metal alkoxides for hydrosilylation of unfunctionalized olefins have been studied. Titanium(IV) alkoxides showed excellent catalytic activity, while alkali metal alkoxides have low catalytic activity for the hydrosilylation of olefins. However, by using titanocene dichloride as an additive, alkali metal alkoxides showed also excellent catalytic property for hydrosilylation. In comparison with titanium alkoxides, no α-adduct was obtained by using alkali metal alkoxides/Cp₂TiCl₂ as catalysts.