水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

Lone-Pair Enhanced Birefringence in an Alkaline-Earth Metal Tin(II) Phosphate BaSn2(PO4)2

The first alkaline-earth metal tin(II) phosphate, BaSn₂(PO₄)₂, has been discovered, which consists of layered structures constructed from strictly alternating [SnO₃]⁴⁻ and [PO₄]³⁻ moieties. This compound is expected to have a large birefringence with Δn≈0.071 at 1064 nm, owing to the presence of stereochemically active lone pair metal cations.     

Direct visualization of structural defects in 2D semiconductors

Direct visualization of the structural defects in two-dimensional (2D) semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties, but is challenging. Although traditional atomic resolution imaging techniques, such as transmission electron microscopy and scanning tunneling microscopy, can directly image the structural defects, they provide only local-scale information and require complex setups. Here, we develop a simple, non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale, including both point defects and grain boundaries. Utilizing this method, we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples, providing key insights into the device functions. Furthermore, the etching method we developed is anisotropic and tunable, opening up opportunities to obtain exotic edge states on demand.     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

N → Sn coordination in the complexes of tin halides with pyridine: A comparison between Sn(II) and Sn(IV)

The experimentally well‐known complexation of tin(II) and tin(IV) halides with pyridine (py) leads to structures showing N → Sn coordination. In the present work, the complexes SnX_n·mpy (where X = F, Cl, Br, I; n = 2, 4; m = 1, 2) possessing this kind of coordination were studied using a computational quantum chemical approach. Various aspects in the theoretical picture of these complexes were examined to find similarities and differences in their N → Sn coordination. The aspects included, among others, the physical nature of intermolecular interactions, and their role in establishing the structure and energetic stabilization of the complexes. In this context, the effect of tin valency was inspected in great detail. As proven by several theoretical methods, a largely ionic character with a certain covalent component can be attributed to the studied N → Sn coordination, irrespective of tin valency. All complexes are destabilized by py‐py and three‐body interactions, but the Sn(II) complexes experience it to a greater extent. Marked differences are observed in the structural behavior of N → Sn and SnX_n during complex formation. This affects the energetics of complexation and, in consequence, the penta‐coordinated Sn(IV) center shows a higher propensity to expand its coordination number, compared with the tri‐coordinated Sn(II) center. The present study supplements the experimental characterization of SnX_n·mpy and, in general, it sheds light on the coordination of heteroaromatic nitrogen to tin. The survey of the Cambridge Structural Database revealed that such coordination occurred in a number of crystal structures.     

Formation and Reactivity of Organo‐Functionalized Tin Selenide Clusters

Reactions of R¹SnCl₃ (R¹=CMe₂CH₂C(O)Me) with (SiMe₃)₂Se yield a series of organo‐functionalized tin selenide clusters, [(SnR¹)₂SeCl₄] ( 1 ), [(SnR¹)₂Se₂Cl₂] ( 2 ), [(SnR¹)₃Se₄Cl] ( 3 ), and [(SnR¹)₄Se₆] ( 4 ), depending on the solvent and ratio of the reactants used. NMR experiments clearly suggest a stepwise formation of 1 through 4 by subsequent condensation steps with the concomitant release of Me₃SiCl. Furthermore, addition of hydrazines to the keto‐functionalized clusters leads to the formation of hydrazone derivatives, [(Sn₂(μ‐R³)(μ‐Se)Cl₄] ( 5 , R³=[CMe₂CH₂CMe(NH)]₂), [(SnR²)₃Se₄Cl] ( 6 , R²=CMe₂CH₂C(NNH₂)Me), [(SnR⁴)₃Se₄][SnCl₃] ( 7 , R⁴=CMe₂CH₂C(NNHPh)Me), [(SnR²)₄Se₆] ( 8 ), and [(SnR⁴)₄Se₆] ( 9 ). Upon treatment of 4 with [Cu(PPh₃)₃Cl] and excess (SiMe₃)₂Se, the cluster fragments to form [(R¹Sn)₂Se₂(CuPPh₃)₂Se₂] ( 10 ), the first discrete Sn/Se/Cu cluster compound reported in the literature. The derivatization reactions indicate fundamental differences between organotin sulfide and organotin selenide chemistry.     

Synthesis of the Antimicrobial S‐Linked Glycopeptide,Glycocin F

The first total synthesis of glycocin F, a uniquely diglycosylated antimicrobial peptide bearing a rare S‐linked N‐acetylglucosamine (GlcNAc) moiety in addition to an O‐linked GlcNAc, has been accomplished using a native chemical ligation strategy. The synthetic and naturally occurring peptides were compared by HPLC, mass spectrometry, NMR and CD spectroscopy, and their stability towards chymotrypsin digestion and antimicrobial activity were measured. This is the first comprehensive structural and functional comparison of a naturally occurring glycocin with an active synthetic analogue.     

Photothermal Oxidation of Cinnamyl Alcohol with Hydrogen Peroxide Catalyzed by Gold Nanoparticle/Antimony-Doped Tin Oxide Nanocrystals

Gold nanoparticles with different mean sizes were formed on antimony-doped tin oxide nanocrystals by the temperature-varied deposition-precipitation method (Au/ATO NCs). Au/ATO NCs possess strong absorption in the near-infrared region due to Drude excitation in addition to the localized surface plasmon resonance (LSPR) of AuNPs around 530 nm. Au/ATO NCs show thermally activated catalytic activity for the oxidation of cinnamyl alcohol to cinnamaldehyde by hydrogen peroxide. The catalytic activity increases with a decrease in the mean Au particle size (d_Au) at 5.3 nm≤d_Au≤8.2 nm. Light irradiation (λ_ex >660 nm, ∼0.5 sun) of Au/ATO NCs increases the rate of reaction by more than twice with ∼95 % selectivity. Kinetic analyses indicated that the striking enhancement of the reaction stems from the rise in the temperature near the catalyst surface of ∼30 K due to the photothermal effect of the ATO NCs.     

Modification of bidentate bis(N-heterocyclic imine) ligands for low-valent main group complexes

The synthesis of modified neutral bis-NHI (NHI is N-heterocyclic imine) ligands and their application for the stabilization of tetryliumylidenes are reported. The ligands’ scaffolding consists of either saturated or methylated imidazoline backbones, and the bridge alternated from flexible ethylene to more rigid o-phenylene. Transmetalation reactivity of the cationic Sn^II compounds was tested towards LiAlH₄ and IDipp→SiCl₂ [IDipp is 1,3-bis(2,6-diisopropyl- phenyl)imidazol-2-ylidene] affording the respective aluminium and silicon complexes.     

Lossy mode resonance-based uniform core tapered fiber optic sensor for sensitivity enhancement

A lossy mode resonance (LMR)-supported fiber optic sensor in which a uniform fiber core is placed among two identical tapered regions, is investigated numerically. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) are considered as LMR active materials used to excite several lossy modes and gold and silver are used as surface plasmon resonance (SPR) active materials. In this probe design, a central uniform core coated with ITO/AZO is the active sensing region, whereas tapered regions are meant for bringing the incident angle close to the critical angle. The sensitivity of the present fiber optic bio-sensor is evaluated for first two LMRs utilizing both ITO and AZO separately, along with its variation with the taper ratio (TR). For ITO, the maximum sensitivity values are observed to be 18.425 μm RIU⁻¹ (refractive index unit) and 0.825 μm RIU⁻¹, corresponding to the first and second LMRs, respectively, at a TR of 1.6 and for AZO, equivalent values are 0.79 μm RIU⁻¹ and 0.35 μm RIU⁻¹, respectively, at a TR of 2.0. The results illustrate that the first LMR is more sensitive than the second LMR and the ITO-coated probe possesses greater sensitivity than the AZO-coated probe for both LMRs. Similarly, for the fiber optic SPR sensor, the maximum value of sensitivity is 5.6425 μm RIU⁻¹, in the case of gold and 5.0615 μm RIU⁻¹ in the case of silver, at a TR of 1.6. Hence, the result shows that the sensor with the present fiber optic probe design has around a 3-fold enhancement in sensitivity compared with conventional SPR sensors. This study will have applications in many sensing schemes where the requirement of large sensitivity is vital.