Diffusion in organic solvents: Interdiffusion coefficient of 1,1,2,2-tetrabromoethane

Interdiffusion coefficient have been measured for 1,1,2,2-tetrabromoethane in 21 organic solvents in order to ascertain the influence of shape, size, viscosity, nature and degree of branching, of the solvent molecules on transport properties. None of the existing correlations for diffusion in binary liquid systems appear to fit all the experimental data. Steric effects due to the solvent molecules are shown to be very important in the interpretation of the diffusion process.     

Surface forces in foam films from ABA block copolymer: a dynamic method study

The thinning of foam films from aqueous solutions of an ABA triblock copolymer of polyethylene oxide and polypropylene oxide (average molecular weight 14,000 g/mol) is studied experimentally. The dependence of the surface forces on film thickness is obtained by the dynamic method of Scheludko and Exerowa.The total surface force measured in foam films (radius 60–70 m) from 10^–5 M (0.014 wt%) polymer solution with 0.1 M NaCl is positive at thicknesses from about 800 down to 460 . The electrostatic repulsion is negligible while the contribution of van der Waals attraction is small (within 15%). Therefore a positive surface force component predominates. Most probably it arises from steric interactions between the hydrophilic polyethylene oxide tails of the polymer. The dynamic method appears to be a suitable technique for exploring the stabilization of foam films from ABA copolymers.     

Molecular and crystal structure of 2-(N-benzyl-N-phenylhydrazinoethylidene)-3-(2H)-benzo[b]-thiophenone

X-ray structural analysis was used to determine the molecular and crystal structure of 2-(N-benzyl-N-phenylhydrazinoethylidene)-3-(2H)-benzo[b]thiophenone. The crystals are monoclinic, the space group isC2/c,a=16.022(6),b=11.202(3),c=22.111(4) Å, =81.08(3)°, and andZ=8. It was shown that the ability of hydrazones of a similar class to exhibit photochromic properties is a function of the steric stresses in the molecules and their confirmation.Institute of Chemical Physics in Chernogolovka, Russian Academy of Sciences, 142432 Chernogolovka. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2805–2809, December, 1992.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.     

Anomalous dehydration of 2-phenylindole-3-carboxamide to 2-phenylindole-3-carbonitrile by lithium aluminum hydride

Steric factors have been shown to be responsible for the anomalous dehydration of 2-phenylindole-3-carboxamide (1) to 2-phenylindole-3-carbonitrile (3) by lithium aluminum hydride. This steric effect was also reflected in the reactions of 2-phenylindole (4) and its derivatives.

---

Anomale Dehydratisierung von 2-Phenylindol-3-carbonsäureamid zu 2-Phenyl-indol-3-carbonitril mit Lithiumaluminiumhydrid (Kurze Mitteilung)

Zusammenfassung Es wird gezeigt, daß für die anomale Dehydratisierung von 2-Phenylindol-3-carbonsäureamid (1) zum entsprechenden Nitril3 durch Lithiumaluminiumhydrid sterische Faktoren verantwortlich sind. Dieser sterische Effekt zeigt sich auch bei Reaktionen von 2-Phenylindol (4) und seiner Derivate.

     

Highly diastereoselective synthesis of new, carbostyril-based type of conformationally-constrained β-phenylserines

We have demonstrated that the readily available amido-keto compounds 5, with prearranged carbonyl and glycine moieties, under strongly basic conditions easily undergo complete and highly diastereoselective cyclization, affording a generalized and practical access to the conformationally constrained phenylserine derivatives 4. High chemical yields, virtually complete diastereoselectivity combined with the operational convenience of the experimental procedures render this method useful for preparation of these diastereomerically pure derivatives.     

Simulation of13C NMR chemical shifts for polychlorinated and polybrominated oxybenzenes with two-particle increment scheme

A two-particle system of OY-Cl and OY-Br mixed increments for predicting¹³C NMR chemical shifts of polyhalogenated polyoxybenzenes has been developed. It has been found that only theortho- and para-interactions of the OY and Hal substituents contribute significantly to the¹³C chemical shifts and that theortho-effects of the OY located between Ha1 and H and those of the OY located between two Ha1 atoms are different. Additional effects are due to solvating solvents. The increment scheme is predictive over the whole class of compounds under consideration and may be realized on personal computers.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 617–624, April, 1994.     

Molecular mechanics study of zirconocenium catalyzed isospecific polymerization of propylene

Stereocontrol energy (ΔE⁰) is investigated as a measure of enantioselectivity of ansa-zircoocenium catalyst in propylene polymerization; it was calculated with MM2 (molecular mechanics) force field using π complex (°C) and transition state (TS) geometries obtained by ab initio molecular orbital methods. Both rac-ethylenebis (1-η⁵-indenyl) - ( 1 ) and rac-ethylenebis (1-η⁵-4,5,7,8-tetrahydroindenyl) ( 2 ) zirconocenium species are isospecific in either the π-complexes or the transition states. The stereoselectivity is greater if there is α-agostic interaction; it is lowered in the cases of β and γ agostic interactions. The ¹³C-NMR steric pentad distribution indicates the poly(propylene) to be much less stereoregular than that predicted by ΔE⁰. Following the occurrence of a regiochemical insertion error, the addition of another monomer via any mode is prohibitively unfavorable. The catalyst suffers loss of stereospecificity as temperature of polymerization increases. Insertion via transition states involving different agostic interactions could be one explanation for the observed loss. © 1995 John Wiley & Sons, Inc.     

The effect of the steric hindrance on metallic cation conduction in polymer electrolytes

2,6-Di-t-butylphenol and oligo(ethylene oxide) bound covalently to polyisocyanate were synthesized and characterized. The ionic conductivities of their Li, Na, and K phenolates were studied at various temperatures. The conductivities were in the range of 10^?7?10^?5 S/cm at 30°C. The conductivity of Na and K salts was approximately 10² greater than that of the Li salts. The t-butyl groups serve to dissociate K and Na ions from the phenoxide. The cations, therefore, are more mobile as a result increasing the conductivity. The temperature dependence of ionic conductivity suggests that the migration of ions is controlled by segmental motion of the polymer, shown by linear curves obtained in Vogel–Tammann–Fulchere plots. The polyisocyanate backbone is a rather stiff structure, however, a flexible oligo(ethylene oxide) side chain forms complexes with metal ion. Since the ion transport is associated with the local movement of polymer segments, the rigidity of the polymer backbone does not have much influence on the ion mobility.