The impact of insecticides containing deltamethrin and cyfluthrin on the composition of surface compounds in the larvae,females and males of Tenebrio molitor

This paper presents the effect of insecticides on the composition of the surface compounds of one of the most harmful insects, Tenebrio molitor, by analysis using GC–MS. As a result of the use of insecticides, the composition of the chemical compounds on the surface of insects changes, depending on the insecticides used. The most numerous groups of the marked compounds were fatty acids, alkanes, esters and sterols. The content of the identified compounds in the larvae increased at both 24 and 48 h after the application of insecticides, in comparison with the control samples. The content of identified compounds in the samples taken from the females increased 24, 48 and 72 h after the application of insecticides in comparison with the control samples. By contrast, in samples prepared from males, the content of identified compounds decreased 24 h after the application of insecticides, compared with the control samples. The highest content of chemical compounds was for fatty acids and alkanes after the use of insecticides. The content of fatty acids after the application of the insecticide with deltamethrin was 62.1 ± 3.3–466.9 ± 5.9 μg/g, and after the application of the insecticide with cyfluthrin was 49.9 ± 1.9–458.3 ± 4.2 μg/g. However, the content of alkanes after the use of deltamethrin was 115.6 ± 4.2–4672.0 ± 32.1 μg/g, and after the use of cyfluthrin was 189.4 ± 3.8–3975.0 ± 10.2 μg/g.     

Validation of a robust and rapid liquid chromatography tandem mass spectrometric method for the quantitative analysis of navitoclax

The Bcl-2 family small molecule inhibitor navitoclax is being clinically evaluated to treat multiple cancers including lymphoid malignancies and small cell lung cancer. A sensitive and reliable method was developed to quantitate navitoclax in human plasma using liquid chromatography with tandem mass spectrometry with which to perform detailed pharmacokinetic studies. Sample preparation involved protein precipitation using acetonitrile. Separation of navitoclax and the internal standard, navitoclax-d8, was achieved with a Waters Acquity UPLC BEH C₁₈ column using isocratic flow over a 3 min total analytical run time. A SCIEX 4500 triple quadrupole mass spectrometer operated in positive electrospray ionization mode was used for the detection of navitoclax. The assay range was 5–5,000 ng/ml and proved to be accurate (89.5–104.9%) and precise (CV ≤ 11%). Long-term frozen plasma stability for navitoclax at −70°C was at least 43 months. The method was applied for the measurement of total plasma concentration of navitoclax in a patient receiving a 250 mg daily oral dose.     

Sample preparation,instrumental analysis,and natural distribution of complex organic pollutants in the wastewater from unconventional gas production

Large amounts of flowback and produced water (FPW) have been generated from hydraulic fracturing process for the production of unconventional gas such as shale gas. Complex organic pollutants are abundantly present in FPW with revealed toxicity to aquatic organisms and these contaminants may transfer into surrounding aquatic environment. Characterization and determination of complicated organic pollutants in FPW remains a challenge due to its complex composition and high salinity matrix. This review article covers the progress of recent 5 years regarding the sample preparation and instrumental analysis methods and thus summarizes the advantages and disadvantages of these methods for critical analysis of organic contaminants in FPW samples. Furthermore, the natural distribution of detected organic compounds and their transformation were reviewed and discussed to enhance the understanding of spatial and temporal behaviors of these organic pollutants in natural environment, paving the way for future development of pollution control policies and strategies. Enlightened by the studies of FPW contamination in the US, the investigations of FPW contamination in China continued to grow due to rapidly growing production of shale gas in China and resulted pollution.     

Rice husk silica as a sustainable filler in the tire industry

In this paper, we studied commercially available precipitated rice husk silica (RHS) with conventional precipitated silica, which has nearly the same surface area, and replaced part of the carbon black with RHS and conventional silica in a basic tread formulation. All formulations were mixed with the same amount of filler during the study. Silica was used at 15, 30 and 50 phr loading, and part of the carbon black was replaced by silica. Compound curing characteristics, physical properties, rebound resilience, heat generation, abrasion loss, dynamic properties and morphology were analyzed. The results indicated that RHS demonstrated compound properties comparable to those of conventional silica. As part of the carbon black was replaced with conventional silica, a slower cure rate, higher rebound resilience, lower heat generation, lower abrasion loss, and lower tan delta were observed with no significant change in physical properties, but some changes in physical properties were observed using one way ANOVA analysis. We found the same trend when replacing part of the carbon black with RHS, such as a slower cure rate, higher rebound resilience, lower heat generation, lower abrasion loss, and lower tan delta with no significant change in physical properties, but some changes in physical properties were observed using one way ANOVA. This sustainable material could be used to replace conventional silica in tire compounding, as well as to replace a portion of carbon black with RHS for improved heat build-up, rolling resistance, and abrasion loss.     

Developing the Low-Temperature Oxidation Mechanism of Cyclopentane: An Experimental and Theoretical Study

At present, the reactivity of cyclic alkanes is estimated by comparison with acyclic hydrocarbons. Due to the difference in the structure of cycloalkanes and acycloalkanes, the thermodynamic data obtained by analogy are not applicable. In this study, a molecular beam sampling vacuum ultraviolet photoionization time-of-flight mass spectrometer (MB-VUV-PI-TOFMS) was applied to study the low-temperature oxidation of cyclopentane (CPT) at a total pressure range from 1–3 atm and low-temperature range between 500 and 800 K. Low-temperature reaction products including cyclic olefins, cyclic ethers, and highly oxygenated intermediates (e. g., ketohydroperoxide KHP, keto-dihydroperoxide KDHP, olefinic hydroperoxides OHP and ketone structure products) were observed. Further investigation of the oxidation of CPT – electronic structure calculations – were carried out at the UCCSD(T)-F12a/aug-cc-pVDZ//B3LYP/6-31+ G(d,p) level to explore the reactivity of O₂ molecules adding sequentially to cyclopentyl radicals. Experimental and theoretical observations showed that the dominant product channel in the reaction of CPT radicals with O₂ is HO₂ elimination yielding cyclopentene. The pathways of second and third O₂ addition – the dissociation of hydroperoxide – were further confirmed. The results of this study will develop the low-temperature oxidation mechanism of CPT, which can be used for future research on accurately simulating the combustion process of CPT.     

Hybrid cyclotriphosphazene–polysiloxane–nano-SiO2 composites with improved mechanical properties

Starting from the functional cyclotriphosphazene, polysiloxane and nano-SiO₂ precursors, three new hybrid nanocomposites with reinforced mechanical properties were prepared. Young’s modulus values for all the composite samples are similar in the range of 7–11 MPa, stress at fracture increases with the nano-SiO₂ content increase in the material and reaches a maximum value of 36 MPa for the composite with 20% nano-SiO₂. The nanocomposites investigated are elastic and demonstrate the ability to be deformed without failure up to 54% strain.     

热解吸反压低温等离子体电离源质谱检测食品中的邻苯二甲酸酯EI北大核心CSCD

基于低温等离子体设计并实现了一套热解吸反压低温等离子体电离(TD-iLTPI)装置。TD-iLTPI装置由热解吸模块和电离源模块集成在一个π型四通管上组成,进样探针取得样品后插入热解吸模块使其气化,之后随载气进入电离区域被电离。iLTPI内部的针电极接交流电,外部的环形电极接地,电极连接方式与LTP相反。该文对热解吸反压低温等离子体电离源进行了参数的优化,并与三重四极杆质谱联用检测了12种代表性的邻苯二甲酸酯,同时考察了TD-iLTPI-MS的分析性能,并对含有邻苯二甲酸酯的实际样品进行了检测。结果表明,邻苯二甲酸丁苄酯(BBP)的标准曲线具有良好的线性相关系数(R;=0.9958),加标回收率为89.7%~116.8%,相对标准偏差为4.5%~8.2%,对邻苯二甲酸酯的检出限也远低于其他敞开式离子源。对白酒、果汁、面包、奶酪和黄油中的邻苯二甲酸酯进行了快速筛查,并定量检测了果汁中的邻苯二甲酸丁苄酯。     

Performance evaluation of functionalized ordered mesoporous silica for VOCs adsorption by molecular dynamics simulation

Volatile organic compounds (VOCs) are growing pollutants now that cause the serious environmental pollution and threaten human health. The functionalized ordered mesoporous silica (FOMS) has attracted considerable attention in adsorbing VOCs. In this paper, the molecular dynamics simulation was used to simulate the adsorption performance of FOMS on VOCs (acetone, ethyl acetate and toluene). After simulating different pore sizes (2 nm, 3 nm and 4 nm) adsorption performances of ordered mesoporous silica (OMS) on VOCs, OMS with a pore size of 4 nm was selected to further study the influence of functional groups (vinyl, methyl, and phenyl). The following law was obtained: the saturated adsorption capacities of vinyl-functionalized OMS (V-FOMS) to acetone, ethyl acetate and toluene were 3.045 mmol.g^?1, 2.568 mmol.g^?1 and 1.976 mmol.g^?1 respectively; the saturated adsorption capacities of methyl-functionalized OMS (M-FOMS) to acetone, ethyl acetate and toluene were 2.798 mmol.g^?1, 2.312 mmol.g^?1 and 1.698 mmol.g^?1 respectively; the saturated adsorption capacities of phenyl-functionalized OMS (P-FOMS) to acetone, ethyl acetate and toluene were 2.124 mmol.g^?1, 1.941 mmol.g^?1 and 1.539 mmol.g^?1 respectively. These results show that the adsorption ability of FOMS for different adsorbates follows the sequence of acetone > ethyl acetate > toluene. Furthermore, the interaction between functional groups (vinyl, methyl and phenyl) in FOMS and VOCs was explored. It is found that the interaction between different functional groups and adsorbates is different (interaction energy effect). This interaction energy effect promotes FOMS to better adsorb VOCs. This work would provide fundamental understanding and guidance for the development of novel adsorption materials for the adsorption of VOCs.     

辉光放电质谱仪期间核查控制图在实验室质量控制中的应用

仪器设备的期间核查是实验室管理及实验室认证认可的一项基本要求,辉光放电质谱仪主要应用于高纯金属材料的分析,标样研制较为困难,使用高纯标准物质进行质量控制及期间核查的方法难以实现。对用液氮低温冷却离子源型的辉光放电质谱仪,使用纯钽片在进行日常仪器调试信号时得到的钨元素含量数据,用于绘制平均值-极差控制图作为实验室质量控制及期间核查的判定依据,以此评价仪器日常工作的性能状态,以保证检测结果的正确性和可靠性。     

热解吸低温等离子体质谱技术直接快速筛查蔬菜中的有机磷农药

在传统低温等离子体质谱技术的基础上引入热解吸装置,建立了一种直接快速筛查蔬菜中有机磷农药的新方法。白菜样品经乙腈提取,离心取上清液进行质谱检测,在正离子检测模式下,将承载样品的载玻片置于加热块上进行解吸,被低温等离子体射流离子化后进入质谱检测。结果表明,在优化实验条件下,8种有机磷农药在0.005～0.200 mg/L质量浓度范围内线性良好,相关系数均大于0.99,检出限为0.001～0.010 mg/L,加标回收率为90.5%～119%,相对标准偏差(RSD,n=6)为12%～17%。与无热解吸条件相比,检测灵敏度提高了9.3～41.7倍。该方法操作简单,无复杂的样品前处理,灵敏度高、准确性好,可用于蔬菜中8种有机磷农药残留的同时测定,在大批量样品的非靶向分析中有较大的应用前景。