High-efficient surface tailoring via reverse atom transfer radical polymerization and reversible addition-fragmentation chain-transfer polymerization in an aqueous system initiated by a monocenter redox pair

The commonly used multi-center initiation methods always lead to the formation of quantities of homopolymer in the surface tailoring based on reverse atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. In this study, a monocenter redox pair constructed of silica bearing tert-butyl hydroperoxide groups and ascorbic acid (SiO₂-TBHP/AsAc) was applied to substitute the commonly used initiation method of R-supported RAFT grafting polymerization. All the propagating radicals were restricted on the surface of solid particles during the whole procedure theoretically, resulting in a higher grafting efficiency of 95.1% combined with the “controllable” feature at 10 h. This redox pair was also used to initiate the reverse ATRP in miniemulsion successfully with a grafting efficiency of 86.3% at 10 h. The grafting efficiency obtained under this monocenter initiation method was significantly higher than that of the frequently reported surface modification by reverse ATRP and RAFT polymerization. In addition, the high-efficient surface tailoring was traced and confirmed by nuclear magnetic resonance, Fourier transform infrared, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, and other analysis tests. The advantage of this monocenter redox pair will open a new avenue for the potential “high-efficient” surface tailoring of various materials.     

给定度序列图的覆盖成本和反向覆盖成本的研究

具有n个顶点且度序列为(m,2,…,2,1,…,1)(1的重数为m)的连通图不止一个(这些图均为树),而每个树对应唯一一个段序列(l₁,l₂,…,l_m).通过对任意一树移动最长段的悬挂点到最短段悬挂点的方式得到另一树,比较前后两树的覆盖成本和反向覆盖成本,给出了具有最小覆盖成本和反向覆盖成本的极树,并且进一步给出了取得最小覆盖成本和反向覆盖成本的顶点.     

Dendritic polyurethane-based prodrug as unimolecular micelles for precise ultrasound-activated localized drug delivery

Ultrasound has been recognized as an exciting tool to enhance the therapeutic efficacy in tumor chemotherapy owing to the triggered drug release, facilitated intracellular drug delivery, and improved spatial precision. Aiming for a precise localized drug delivery, novel dendritic polyurethane-based prodrug (DOX-DPU-PEG) was fabricated with a drug content of 18.9% here by conjugating DOX onto the end groups of the functionalized dendritic polyurethane via acid-labile imine bonds. It could easily form unimolecular micelles around 38 nm. Compared with the non-covalently drug-loaded unimolecular micelles (DOX@Ph-DPU-PEG), they showed excellent pH/ultrasound dual-triggered drug release performance, with drug leakage of only 4% at pH 7.4, but cumulative release of 14% and 88% at pH 5.0 without and with ultrasound, respectively. The ultrasound responsiveness was attributed to the unique strawberry-shaped topological structure of the DOX-DPU-PEG, in which DOX was embedded in the skin layer of the hydrophobic DPU cores. With ultrasound, the DOX-DPU-PEG unimolecular micelles possessed enhanced tumor growth inhibition than free DOX but showed no obvious cytotoxicity on the tumor cells without ultrasound. Such feature makes them promising potential for precise localized drug delivery.     

Size reduction of “reformed casein micelles” by high-power ultrasound and high hydrostatic pressure

We investigated the effect of ultrasound (US) and high hydrostatic pressure (HHP) on the size of reformed casein micelles (RMCs) obtained by titrating calcium and phosphorous solution into sodium caseinate solutions. Both US and HHP reduced the size of the RMCs. A decrease in size from ~200 nm to ~170 nm when US (20 kHz, 0.46 W/mL) was applied for 30 min; and down to ~85 nm when HHP was applied 500 MPa for 15 min. Electron microscopic analysis showed that the RMCs before and after US are similar to milk native casein micelles, and that HHP extensively disintegrated the RMCs. Small angle X-ray scattering and SDS-PAGE showed that the internal structure of the RMCs as well as the casein molecules are not affected by the US and HHP treatments.     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Glycopolymers Made from Polyrotaxanes Terminated with Bile Acids: Preparation,Self‐Assembly,and Targeting Delivery

The use of natural compounds to construct biomaterials, including delivery system, is an attractive strategy. In the present study, through threading functional α‐cyclodextrins onto the conjugated macromolecules of poly(ethylene glycol) (PEG) and natural compound bile acid, glycopolymers of polyrotaxanes with the active targeting ability are obtained. These glycopolymers self‐assemble into micelles as evidenced by dynamic light scattering and transmission electron microscopy, in which glucosamine, as an example of targeting groups, is introduced. These micelles after loading doxorubicin (DOX) exhibit the selective recognition with cancer cells 4T1. Meanwhile, the maximal half inhibitory concentration is determined to be ≈2.5 mg L^?1 for the DOX‐loaded micelles, close to the value of free DOX·HCl (1.9 mg L^?1). The cumulative release of DOX at pH 5.5 is faster than at pH 7.4, which may be used as the controlled release system. This drug delivery system assembled by glycopolymers features high drug loading of DOX, superior biocompatibility. The strategy not only utilizes the micellization induced by bile acids, but also overcomes the major limitation of PEG such as the lack of targeting groups. In particular, this drug delivery platform can extend to grafting the other targeting groups, rendering this system more versatile.     

Reversibly light‐responsive biodegradable poly(carbonate) micelles constructed via CuAAC reaction

Light‐responsive poly(carbonate)s PEG₁₁₃‐b‐PMPC_n‐SP were synthesized via copper catalyzed azide‐alkyne cycloaddition reaction between azide‐modified spiropyran (SP‐N₃) and amphiphilic copolymer PEG₁₁₃‐b‐PMPC_n. PEG₁₁₃‐b‐PMPC₂₅‐SP can self‐assemble to biocompatible micelles with an average diameter of ～96 nm and a critical aggregation concentration of 0.0148 mg mL^?1. Under 365 nm UV light irradiation, the characteristic absorption intensity of merocyanine (MC) progressively increased and most of the micellar aggregations were disrupted within 10 min, suggesting the completion of the transformation of hydrophobic SP to hydrophilic MC. Subsequent exposuring the micelles to 620 nm visible light, spherical micelles aggregated again. The light‐controlled release and re‐encapsulation behaviors of coumarin 102‐loaded micelles were further investigated by fluorescence spectroscopy. This study provides a convenient way to construct smart poly(carbonate)s nanocarriers for controlled release and re‐encapsulation of hydrophobic drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 750–760     

Poly{dl-lactide-b-[oligo(ethylene glycol) methyl ether (meth)acrylate)]} block copolymers. Synthesis,characterization, micellization behavior in aqueous solutions and encapsulation of model hydrophobic compounds

A series of well-defined poly{dl -lactide-b-[oligo(ethylene glycol) methyl ether (meth)acrylate)]} (PDLLA-b-POEG[M]A) functional amphiphilic diblock copolymers was synthesized by employing a multistep procedure involving: (a) ring-opening polymerization of dl -lactide using n-decanol and stannous octoate as the initiating system, (b) esterification reaction of the PDLLA hydroxyl end groups with 2-bromoisobutyryl bromide, (c) atom transfer radical polymerization of OEG(M)A with the newly created bromoisobutyryl initiating site, and (d) incorporation of biotin or folic acid at the POEGA chain ends using click chemistry. The products were characterized by NMR spectroscopy and SEC analysis. The aggregation behavior of the synthesized block copolymers was investigated by dynamic light scattering at 25°C in aqueous solutions. The hydrophobic model compounds Nile red and pyrene were efficiently incorporated into the copolymer aggregates in aqueous solutions. High partition coefficient values were determined by fluorescence spectroscopy.     

Reduction and pH dual‐responsive block copolymers containing pendent p‐nitrobenzyl carbamate functionalities: Synthesis and self‐assembly behavior

We report on the preparation of reduction‐responsive amphiphilic block copolymers containing pendent p‐nitrobenzyl carbamate (pNBC)‐caged primary amine moieties by reversible addition–fragmentation chain transfer (RAFT) radical polymerization using a poly(ethylene glycol)‐based macro‐RAFT agent. The block copolymers self‐assembled to form micelles or vesicles in water, depending on the length of hydrophobic block. Triggered by a chemical reductant, sodium dithionite, the pNBC moieties decomposed through a cascade 1,6‐elimination and decarboxylation reactions to liberate primary amine groups of the linkages, resulting in the disruption of the assemblies. The reduction sensitivity of assemblies was affected by the length of hydrophobic block and the structure of amino acid‐derived linkers. Using hydrophobic dye Nile red (NR) as a model drug, the polymeric assemblies were used as nanocarriers to evaluate the potential for drug delivery. The NR‐loaded nanoparticles demonstrated a reduction‐triggered release profile. Moreover, the liberation of amine groups converted the reduction‐responsive polymer into a pH‐sensitive polymer with which an accelerated release of NR was observed by simultaneous application of reduction and pH triggers. It is expected that these reduction‐responsive block copolymers can offer a new platform for intracellular drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1333–1343