Behavior and process of background signal formation of hydrogen,carbon, nitrogen,and oxygen in silicon wafers during depth profiling using dual-beam TOF-SIMS

The behavior and mechanism of background signals during depth profiling of atmospheric elements using dual-beam time-of-flight secondary ion mass spectrometry (TOF-SIMS) have been experimentally investigated for silicon wafers. The background signals of atmospheric elements were found to be inversely proportional to the sputtering rate. Most of the background signals are largely attributable to the accumulation of components through adsorption and ion bombardment in the pre-equilibrium state. On the other hand, the contribution of real-time adsorption during the instant after the last sputtering in the equilibrium state is negligible under the present experimental conditions. H₂O is dominant in the background formation process of hydrogen and oxygen, which is supported by the higher adsorption coefficients. The background levels of carbon and nitrogen are lower than those of hydrogen and oxygen. Furthermore, the background signal of carbon with respect to the sputtering rate shows a different trend than the other elements. This could be attributed to accumulation in the pre-equilibrium state. These results indicate that the background levels can be lowered close to those of dynamic-SIMS by using an extremely high sputtering rate in dual-beam TOF-SIMS.     

The Coordination Chemistry of f-Block Elements in Molten Salts

The coordination chemistry of f-block elements (lanthanide and actinide) in molten salts has become a resounding topic in view of its great importance to the research and development (R&D) of molten salt reactors and pyroprocessing. In this Review article, a general overview of the coordination chemistry of f-block elements in molten salts is provided including past achievements and recent advances. Particular emphases are placed on the oxidation state, speciation, and solution structure of f-block metal ions in molten salts, as well as their relationships with the salt composition. Furthermore, this review briefly discusses the spectroscopic and theoretical methods that complement each other in revealing the coordination properties.     

A nonlinear model for marble sulphation including surface rugosity and mechanical damage

Here we propose and analyze a mathematical model that aims to describe the marble sulphation process occurring in a given material. The model accounts for rugosity as well as for damaging effects. This model is characterized by some technical difficulties that seem hard to overcome from a theoretical viewpoint. Therefore, we introduce some physically reasonable modifications in order to establish the existence of a suitable notion of solution on a given time interval. Numerical simulations are presented and discussed, also in view of further research.     

(Sm0.5Gd0.2Nd0.3)2(Hf0.3Ce0.7)2O7复合氧化物的热物理性能

为寻求新型热障涂层用陶瓷材料,本文采用高温固相烧结法制备了(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。利用XRD分析了其晶体结构,SEM分析其显微组织,膨胀仪测试其热膨胀性能,激光热导仪测试其热扩散系数。结果表明,成功制备了具有单一萤石晶体结构的(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。其显微组织结构致密,晶界清晰无其他相存在。由于复杂的元素组成和较大的原子量,其热导率明显低于7YSZ和Sm₂Ce₂O₇。其较低的热膨胀系数则归因于B位离子较小的离子半径,但其热膨胀系数依然满足热障涂层的要求。     

Versatile anisotropic mesh adaptation methodology applied to pure quantity of interest error estimator. Steady,laminar incompressible flow

We introduce a new flexible mesh adaptation approach to efficiently compute a quantity of interest by the finite element method. Efficiently, we mean that the method provides an evaluation of that quantity up to a predetermined accuracy at a lower computational cost than other classical methods. The central pillar of the method is our scalar error estimator based on sensitivities of the quantity of interest to the residuals. These sensitivities result from the computation of a continuous adjoint problem. The mesh adaptation strategy can drive anisotropic mesh adaptation from a general scalar error contribution of each element. The full potential of our error estimator is then reached. The proposed method is validated by evaluating the lift, the drag, and the hydraulic losses on a 2D benchmark case: the flow around a cylinder at a Reynolds number of 20.     

Finite element computations of viscoelastic two-phase flows using local projection stabilization

A three-field local projection stabilized (LPS) finite element method is developed for computations of a three-dimensional axisymmetric buoyancy driven liquid drop rising in a liquid column where one of the liquid is viscoelastic. The two-phase flow is described by the time-dependent incompressible Navier-Stokes equations, whereas the viscoelasticity is modeled by the Giesekus constitutive equation in a time-dependent domain. The arbitrary Lagrangian-Eulerian (ALE) formulation with finite elements is used to solve the governing equations in the time-dependent domain. Interface-resolved moving meshes in ALE allows to incorporate the interfacial tension force and jumps in the material parameters accurately. A one-level LPS based on an enriched approximation space and a discontinuous projection space is used to stabilize the numerical scheme. A comprehensive numerical investigation is performed for a Newtonian drop rising in a viscoelastic fluid column and a viscoelastic drop rising in a Newtonian fluid column. The influence of the viscosity ratio, Newtonian solvent ratio, Giesekus mobility factor, and the Eötvös number on the drop dynamics are analyzed. The numerical study shows that beyond a critical Capillary number, a Newtonian drop rising in a viscoelastic fluid column experiences an extended trailing edge with a cusp-like shape and also exhibits a negative wake phenomena. However, a viscoelastic drop rising in a Newtonian fluid column develops an indentation around the rear stagnation point with a dimpled shape.     

A Highly Lewis Acidic Strontium ansa-Arene Complex for Lewis Acid Catalysis and Isobutylene Polymerization

The potential of a dicationic strontium ansa-arene complex for Lewis acid catalysis has been explored. The key to its synthesis was a simple salt metathesis from SrI₂ and 2 Ag[Al(OR^F)₄], giving the base-free strontium-perfluoroalkoxyaluminate Sr[Al(OR^F)₄]₂ (OR^F=OC(CF₃)₃). Addition of an ansa-arene yielded the highly Lewis acidic, dicationic strontium ansa-arene complex. In preliminary experiments, the complex was successfully applied as a catalyst in CO₂-reduction to CH₄ and a surprisingly controlled isobutylene polymerization reaction.     

ICP-AES法测定高温合金中5种非金属元素

本文研究了快速测定高温合金中5种非金属元素(As、B、P、Se、Si)的分析方法,以满足高温合金行业对非金属元素检测的需求。利用王水和高氯酸对高温合金进行酸溶解,并系统研究了基体元素和共存元素对分析元素谱线的光谱干扰情况,同时进行了分析谱线的选择。5种非金属元素的检出限在5.5 ～ 11.9 ug/ml,5次数据的相对标准偏差(RSD,n=5)为0.9 % ～ 7 %,各元素的回收率在96 % ～ 102 %之间,该方法适用于高温合金中非金属元素的测定。     

Virtual element methods for parabolic problems on polygonal meshes

The virtual element method (VEM) is a recent technology that can make use of very general polygonal/polyhedral meshes without the need to integrate complex nonpolynomial functions on the elements and preserving an optimal order of convergence. In this article, we develop for the first time, the VEM for parabolic problems on polygonal meshes, considering time‐dependent diffusion as our model problem. After presenting the scheme, we develop a theoretical analysis and show the practical behavior of the proposed method through a large array of numerical tests. © 2015 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 2110–2134, 2015     

Finite-Temperature Dimer Method for Finding Saddle Points on Free Energy Surfaces

The dimer method and its variants have been shown to be efficient in finding saddle points on potential surfaces. In the dimer method, the most unstable direction is approximately obtained by minimizing the total potential energy of the dimer. Then, the force in this direction is reversed to move the dimer toward saddle points. When the finite-temperature effect is important for a high-dimensional system, one usually needs to describe the dynamics in a low-dimensional space of reaction coordinates. In this case, transition states are collected as saddle points on the free energy surface. The traditional dimer method cannot be directly employed to find saddle points on a free energy surface since the surface is not known a priori. Here, we develop a finite-temperature dimer method for searching saddle points on the free energy surface. In this method, a constrained rotation dynamics of the dimer system is used to sample dimer directions and an efficient average method is used to obtain a good approximation of the most unstable direction. This approximated direction is then used in reversing the force component and evolving the dimer toward saddle points. Our numerical results suggest that the new method is efficient in finding saddle points on free energy surfaces. © 2019 Wiley Periodicals, Inc.