Cyclohexane‐1,3‐dione as a derivatizing agent for the analysis of aldehydes by micelar electrokinetic chromatography with diode array detection

Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r² above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.     

The optimization of hydrothermal process of MoS_2 nanosheets and their good microwave absorption performances

In this study,flower-like MoS_2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S) in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS_2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS_2 is a candidate for a practical microwave absorbent.     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

氧化镓纳米材料的制备及其在光电探测方面的应用研究进展

近年来,半导体的纳米材料凭借其奇特的介观物理特性,成为当前研究的热点,特别是纳米金属氧化物。氧化镓纳米材料具备优异的光电、气敏、耐压且低损耗等特性,为材料学、电子学和化学等多个研究领域带来了新的机遇。本文概述了氧化镓纳米结构的制备方法,并展望了其在光电探测方面的应用。     

A new aliphatic ester of hydroxysalicylic acid from fermented Carica papaya L. preparation with a potential hair growth stimulating activity

Abstract

An aliphatic ester of hydroxysalicylic acid (6), reported for the first time from a natural source in addition to five known compounds were isolated from the fermented Carica papaya L. preparation, a commercialized functional food. The known compounds were identified as 5-hydroxymethylfurfuraldehyde (1), trans-caffeic acid (2), butyl 4-hydroxybenzoate (butylparaben) (3), lycopene (4), benzyl isothiocyanate (5). Compounds 1 and 3 were reported for the first time from Papaya fruits through this study. The new compound showed a moderate antioxidant activity and a potent hair growth stimulating activity in vitro.     

What do teachers need? Math and special education teacher educators’ perceptions of essential teacher knowledge and experience

Special education and mathematics education are becoming increasingly intertwined in inclusive classrooms. However, research and practice in these two fields are not always aligned. We discuss, in the context of extant research on pedagogical theory, concepts of access, and the findings of an exploratory study, how these two education sub-fields view teacher expertise. Teacher educators (from math and special education) were asked to rank the importance of different types of expertise for effectively posing purposeful mathematical questions. The groups differed significantly in their rankings of the importance of knowing individual students and general teaching experience. There were also notable differences between the groups’ rankings of the importance of knowing the needs of students with disabilities and mathematical content knowledge. The possible reasons for this are discussed, along with suggestions for improving professional collaboration.     

“翻转+分段式”有机化学实验教学设计及实践研究

以FeCl3·6H2O催化合成乙酸乙酯为教学内容,采用“翻转+分段式”混合教学方法对整个实验过程进行了改革探索。通过教师准备学习资源,学生自主学习,课堂分段讲解,互动交流以及跟踪评价等,探讨了大学有机化学实验实施“翻转+分段式”混合教学方法的有效途径。实践结果表明:混合教学模式能够显著促进学生对实验内容的理解和掌握,明显增加学生自主操作的时间,还能有效降低实验过程中的安全隐患。     

固定化胰蛋白酶整体小柱的制备及其用于微量蛋白质的快速酶解

发展了一种光引发聚合法制备固定化胰蛋白酶整体小柱的方法，以用于微量蛋白质的快速酶解。整体小柱由功能单体4-戊烯酸琥珀酰亚胺酯、甲基丙烯酸羟乙酯，交联剂季戊四醇三丙烯酸酯和三元致孔剂二甲基亚砜、N，N-二甲基甲酰胺、十二醇在20 μL的移液器吸头尖端原位聚合而成。形成整体柱后，胰蛋白酶分子通过氨基与琥珀酰亚胺酯反应实现固定化。系统研究了聚合溶液中活性酯含量与柱床体积对胰蛋白酶固载量的影响，评价了固定化酶整体小柱对标准蛋白细胞色素C和牛血清白蛋白的酶解效率，以及整体小柱的稳定性和重复性。结果表明，在离心辅助下，酶解过程可在10 min内完成，批次间具有良好的重复性。最后将固定化酶整体小柱应用于1×10⁵个人急性早幼粒白血病（NB4）细胞与人急性T细胞白血病（Jurkat T）细胞的快速酶解，经纳升级液相色谱与高分辨质谱联用分析后鉴定得到2489个和2572个蛋白质。相比于溶液状态下的酶解，分别提高了2.2%和6.1%的蛋白鉴定数量，展现了其在蛋白组学研究中的应用潜力。     

聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)的制备与性能

采用熔融酯交换和缩聚两步法,合成了以1,4-丁二醇、4,8-三环[5.2.1.0(2,6)]癸烷二甲醇和碳酸二苯酯为原料的聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)(PBTCx, x为进料中TCD占二元醇总量的百分比)。用1H NMR和13C NMR对PBTCs的微观结构和组成进行了表征。采用GPC、 DSC、 XRD、 TG对PBTCs的分子量、玻璃化转变温度(Tg)、热稳定性等进行了研究。结果表明,PBTCs的Mw为10500~124800 g?mol-1, Mn为6300~73000 g?mol-1, PDI为1.59~1.73; PBTCs呈无定形态、Tg为-3.43 ℃~70.90 ℃, PBTCs表现出比PBC更高的热稳定性。薄膜拉伸试验结果表明,PBTC30(拉伸强度为33.54 MPa,断裂伸长率为275.69%)和PBTC40(拉伸强度为32.13 MPa,断裂伸长率为294.63%)具有较高的强度和韧性,在薄膜材料中具有一定的应用潜力。