电机驱动微装配在双光子制备微结构中的应用

对微结构的制作、微装配系统进行了研究. 采用飞秒激光双光子聚合微加工技术制作有底座、精细的三维立体“拱形”微结构, 其高250μm、长300μm、厚50μm. 将此微结构与实验室自主搭建的二维微装配平台相结合, 利用自主编程的人机交互界面驱动步进电机, 远程操控微装配设备; 将荧光闪烁陶瓷粉末装配到微结构中, 对装配后的微结构进行荧光光谱表征发现, 纯荧光粉末和微结构中的荧光粉末的发射光谱在测量误差范围内基本一致, 表明荧光粉末的光学性质未发生改变. 利用该装置可以将各类微纳米级材料和微结构进行装配, 形成含有不同材料的微结构系统.     

Nano-sized Cu(II) and Zn(II) complexes and their use as a precursor for synthesis of CuO and ZnO nanoparticles: A study on their sonochemical synthesis,characterization, and DNA-binding/cleavage,anticancer, and antimicrobial activities

Two new divalent copper (C1) and zinc (C2) chelates having the formulae [M(PIMC)₂] (where M = Cu(II), Zn(II) and PIMC = Ligand [(E)-3-(((3-hydroxypyridin-2-yl)imino)methyl)-4H-chromen-4-one] were obtained and characterized by several techniques. Structures and geometries of the synthesized complexes were judged based on the results of alternative analytical and spectral tools supporting the proposed formulae. IR spectral data confirmed the coordination of the ligands to the copper and zinc centers as monobasic tridentate in the enol form. Thermal analysis, UV-Vis spectra and magnetic moment confirmed the geometry around the copper center to be tetrahedral, square pyramidal and octahedral. Study of the binding ability of the synthesized compounds with Circulating tumor DNA (CT-DNA) bas been evaluated applying UV-Vis spectral titration and viscosity measurements. The copper and zinc oxides were achieved from the copper and zinc nano-particles structures Schiff base complexes as the raw material after calcination for 5 hr at 600°C. On the other hand, synthesized of C1 and C2 NPs were used as suitable precursors to the preparation of CuO and ZnO NPs. Finally, the synthesized of the two complexes exhibited enhanced activity against the tested bacterial (Staphylococcus aureus and Escherichia Coli) and fungal strains (Candida albicans and Aspergillus fumigatus) as compared to HPIMC. Among all these synthesized compounds, C1 exhibits good cleaving ability compared to other newly synthesized C2.     

Sweet like chocolate

A new crystalline form of αβ‐d ‐lactose prepared by oven drying a concentrated aqueous solution of d ‐lactose is a lesson in the power of observation and the rigorous analysis of powder samples.     

An adaptive multilevel wavelet framework for scale‐selective WENO reconstruction schemes

We put forth a dynamic computing framework for scale‐selective adaptation of weighted essential nonoscillatory (WENO) schemes for the simulation of hyperbolic conservation laws exhibiting strong discontinuities. A multilevel wavelet‐based multiresolution procedure, embedded in a conservative finite volume formulation, is used for a twofold purpose. (i) a dynamic grid adaptation of the solution field for redistributing grid points optimally (in some sense) according to the underlying flow structures, and (ii) a dynamic minimization of the in built artificial dissipation of WENO schemes. Taking advantage of the structure detection properties of this multiresolution algorithm, the nonlinear weights of the conventional WENO implementation are selectively modified to ensure lower dissipation in smoother areas. This modification is implemented through a linear transition from the fifth‐order upwind stencil at the coarsest regions of the adaptive grid to a fully nonlinear fifth‐order WENO scheme at areas of high irregularity. Therefore, our computing algorithm consists of a dynamic grid adaptation strategy, a scale‐selective state reconstruction, a conservative flux calculation, and a total variation diminishing Runge‐Kutta scheme for time advancement. Results are presented for canonical examples drawn from the inviscid Burgers, shallow water, Euler, and magnetohydrodynamic equations. Our findings represent a novel direction for providing a scale‐selective dissipation process without a compromise on shock capturing behavior for conservation laws, which would be a strong contender for dynamic implicit large eddy simulation approaches.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

基于局部加密纯无网格法非线性Cahn-Hilliard方程的模拟

为数值求解描述不同物质间相位分离现象的高阶非线性Cahn-Hilliard(C-H)方程,发展了一种基于局部加密纯无网格有限点集法(local refinement finite pointset method,LR-FPM).其构造过程为:1)将C-H方程中四阶导数降阶为两个二阶导数,连续应用基于Taylor展开和加权最小二乘法的FPM离散空间导数;2)对区域进行局部加密和采用五次样条核函数以提高数值精度;3)局部线性方程组求解中准确施加含高阶导数Neumann边值条件.随后,运用LR-FPM求解有解析解的一维/二维C-H方程,分析粒子均匀分布/非均匀分布以及局部粒子加密情况的误差和收敛阶,展示了LR-FPM较网格类算法在非均匀布点情况下的优点.最后,采用LR-FPM对无解析解的一维/二维C-H方程进行了数值预测,并与有限差分结果相比较.数值结果表明,LR-FPM方法具有较高的数值精度和收敛阶,比有限差分法更易数值实现,能够准确展现不同类型材料间相位分离非线性扩散现象随时间的演化过程.     

Monoclinic β-Li2TiO3: Neutron diffraction study and estimation of Li diffusion pathways

A neutron powder diffraction study on lithium titanate Li₂TiO₃ was performed at low temperatures. The monoclinic β-phase has been found to be stable over the whole investigated range of temperatures (4 K–300 K). A smooth and nonlinear increase of the lattice parameters has been observed upon heating and correlated to the behavior of interatomic distances. Lithium diffusion pathways in Li₂TiO₃ were estimated theoretically on the basis of the obtained structural data using bond-valence modeling. Experimentally diffusion pathways were evaluated by analysis of the negative nuclear scattering densities at 1073 K, which were reconstructed using a maximum entropy method. Although the bond-valence mismatch map indicated a possible Li diffusion either in ab plane or along c direction, analysis of the experimental data revealed that Li migration is thermodynamically less feasible in latter case.     

NeuDATool：支持GPU硬件加速和计算机集群跨节点并行的开源中子散射数据分析软件

实验势精修是20世纪80年代英国散裂中子源无定型材料组开发的用于分析中子散射实验数据的软件. 实验势精修的目标是根据中子散射数据重建样品的三维原子结构. 在过去的几十年，实验势精修被广泛用于中子散射实验数据分析，为实验用户提供了可靠的分析结果. 但是实验势精修是基于共享内存并行计算(OpenMP)的Fortran程序，不支持计算机服务器集群跨节点并行加速和GPU加速；这限制了它的分析速度. 随着计算机服务器集群的广泛建设和GPU加速技术的普遍使用，有必要重新编写EPSR程序以提高运算速度. 本文使用面向对象的C++语言，开发了一套实现EPSR算法的开源软件包NeuDATool；软件通过MPI和CUDA C实现了计算机集群跨节点并行和GPU加速. 使用液态水和玻璃态二氧化硅的中子散射实验数据对软件进行了测试. 测试显示软件可以正确重建出样品的三维原子结构；并且模拟体系达到10万原子以上时，使用GPU加速可以比串行的CPU算法提高400倍以上的模拟速度. NeuDATool为中子实验用户尤其是对熟悉C++编程并希望定义特殊分析算法的实验科学家提供了一种新的选择.     

Hierarchical 3D micro flower-like Co3O4 structures for NO2 detection at room temperature

Micro flowers-like Co₃O₄ structures have been synthesized by a low-cost single-step hydrothermal route. The XRD pattern and Raman spectra confirmed the cubic crystal structure of Co₃O₄ and FESEM images displayed that the synthesized Co₃O₄ attained a flower-like morphology. The higher sensor response ∼22% was recorded for hierarchical 3D flower-like Co₃O₄ structures at room temperature for 60 ppm NO₂ exposure with response (recovery) time of the order of ∼25 (70) s respectively. The flower-like Co₃O₄ structures attained a reversible, highly stable and selective response towards NO₂ at room temperature.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点，以边单元作为求解点，改进传统的格林元方法，减少未知数和求解矩阵维度；并提出基于改进格林元的加密网格加密方法，保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比，验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析，结果表明：①格林元方法是一种高精度的动态模拟方法，将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度；②改进格林元方法的加密基于叠加原理，不需要通过插值近似，其求解精度高.在相同加密网格条件下，基于本文改进格林元方法的加密效果比有限差分加密效果更佳；③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大，在动态分析和参数反演时，应着重考虑这些因素的影响.