Transition Metal Doping Induces Ti3+ to Promote the Performance of SrTiO3@TiO2 Visible Light Photocatalytic Reduction of CO2 to Prepare C1 Product.

Transition metal Fe, Co, Ni and Cu doped strontium titanate-rich SrTiO₃@TiO₂ (STO@T) materials were prepared by hydrothermal method. The prepared doped materials exhibit better photocatalytic CO₂ reduction to CH₄ ability under visible light conditions. Among them, Fe-doped and undoped SrTiO₃@TiO₂ under visible light conditions CO₂ reduction products only CO, while M-STO@T (M=Co, Ni, Cu) samples converted CO₂ to CH₄. The average methane yield of Ni-doped STO@T samples are as high as 73.85 μmol g⁻¹ h⁻¹. The production of methane is mainly due to the increase in the response of the doped samples to visible light. And the increase in the separation rate of photogenerated electrons and holes and the efficiency of electron transport caused by the generation of impurity levels. The impurity level caused by Ti³⁺ plays an important role in the production of methane by CO₂ visible light reduction. Ni doping effectively improves the photocatalytic performance of STO@T and CO₂ reduction mechanism were explained.     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

从废水到新能源:光催化燃料电池的优化与应用

随着经济的飞速发展,社会对能源的需求日益扩大,对工业废水的无害化处理也提出了更高的要求。光催化燃料电池 (photocatalytic fuel cell, PFC) 在燃料电池中引入半导体光催化材料作为电极,实现了有机污染物高效降解和同步对外产电的双重功能,在废水无害化与资源化利用方面具有潜在的应用价值。半导体光催化电极是PFC系统高效运行的核心组件,增强其可见光响应和光生载流子分离是提高PFC性能的关键策略。反应器结构设计和运行参数优化也有利于改善PFC性能。本文从PFC基本原理和应用入手,综述了PFC在环境污染物资源化处理中的研究进展,并详细阐述了提高PFC的污染控制性能和产电效率的优化手段,为进一步设计高效稳定的PFC系统并实现其在水污染控制和清洁能源生产中的应用提供理论指导。     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

Plasmon Coupling-Induced Hot Electrons for Photocatalytic Hydrogen Generation

We present the fabrication of core-shell-satellite Au@SiO₂-Pt nanostructures and demonstrate that LSPR excitation of the core Au nanoparticle can induce plasmon coupling effect to initiate photocatalytic hydrogen generation from decomposition of formic acid. Further studies suggest that the plasmon coupling effect induces a strong local electric field between the Au core and Pt nanoparticles on the SiO₂ shell, which enables creation of hot electrons on the non-plasmonic-active Pt nanoparticles to participate hydrogen evolution reaction on the Pt surface. In addition, small SiO₂ shell thickness is required in order to obtain a strong plamon coupling effect and achieve efficient photocatalytic activities for hydrogen generation.     

One-step synthesis of novel flower-like Sn-doped ZnO architectures with enhanced photocatalytic activity

A facile hydrothermal method to synthesize flower-like Sn-doped ZnO (FLSn-ZnO) nanostructures is described. The obtained hierarchical architectures of FLSn-ZnO are found to be assembled with abundant regular-shaped nanosheets and nanoparticles. A possible formation mechanism is proposed on the base of a series of control experiments. The tests show that FLSn-ZnO architectures exhibit higher photocatalytic activity in the degrading Rhodamine B and tetracycline aqueous solution than pure ZnO under UV-light irradiation. And photocurrent response and photoluminescence of ZnO and FLSn-ZnO demonstrates that in photocatalytic performance, the latter is higher.     

Eco-friendly synthesis of ZnO nanorods using Cycas pschannae plant extract with excellent photocatalytic,antioxidant, and anticancer nanomedicine for lung cancer treatment

The tunable ZnO nanorods (NRs) are produced due to the phytochemicals present in Cycas pschannae leaves which act as reducing and stabilizing agents. The confirmations of the ZnO NRs were validated using different characterization techniques: X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer, Emmett and Teller (BET), scanning electron microscopy–Energy Dispersive X-Ray Analysis (EDX), UV–visible spectroscopy, Raman spectroscopy, and transmission electron microscopy. The ZnO NRs show unique surface area and low particle size. Photocatalytic activity was measured and found to be 50.75% at low concentrations and 78.33% at high concentrations. The antioxidant activity of the ZnO NRs also showed promising results for their use in free radical scavenging. In vitro toxicity studies using zebrafish embryos was performed to evaluate the toxic nature of it and the obtained result confirmed its non-toxic nature. In addition, ZnO anticancer potential was verified using the A549 lung cancer cell line. Cytotoxic assessments of ZnO NRs were performed via 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT), and neutral red uptake assays to examine the cell death cycle on the A549 lung cancer cell. Dose-dependent apoptosis and necrosis were confirmed by Lactate dehydrogenase (LDH) assay. It was also confirmed that ZnO NRs induce Reactive oxygen species (ROS) and apoptosis inside cancer (A549) cells via different intrinsic gene expression. Thus, based on this research it is evident that an effective ecofriendly, nontoxic potential anticancer drug can be synthesized using C. pschannae leaf extract.     

Green synthesis,characterization, and biological activities of saffron leaf extract-mediated zinc oxide nanoparticles: A sustainable approach to reuse an agricultural waste

To increase the profitability and sustainability of agricultural waste, a facile green approach was established to synthesize zinc oxide nanoparticles (ZnO NPs) using saffron leaf extract as a reducing and stabilizing agent. Structural characteristics of NPs were investigated by X-ray diffraction (XRD), Fourier-transform infrared (FTIR), field emission scanning electron microscopy (FESEM), and UV–Visible (UV–Vis) spectroscopy. Characterization results revealed that ZnO NPs is highly crystalline with a hexagonal wurtzite structure and spherical particles with diameter less than 50 nm, as confirmed by XRD and FESEM techniques. UV–Vis absorption spectra depicted an absorption peak at 370 nm, which confirms the formation of ZnO NPs. FTIR spectral analysis confirmed the presence of functional groups and metal oxygen groups. The biological activities of ZnO NPs were also investigated. The antibacterial effect of ZnO NPs was investigated against selected food pathogens (Salmonella Typhimurium, Listeria monocytogenes, and Enterococcus faecalis). The study results prove that the green synthesized ZnO NPs show enhanced antibacterial activity against S. Typhimurium when compared with other strains. A dose-dependent free radical scavenging activity was observed for ZnO NPs in both 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) and fluorescence recovery after photobleaching (FRAP) assays. The ZnO NPs were evaluated for their photocatalytic activity during the degradation of methylene blue (MB) dye in aqueous solutions. The maximum removal of MB achieved was 64% with an initial ZnO NP concentration of 12 mg/mL under UV light. The present study revealed that the agricultural waste (saffron leaf) provides a simple and eco-friendly option to sustainably synthesize ZnO NPs for use as a photocatalyst. In addition, this is the first report on saffron leaf-mediated synthesis of ZnO NPs.     

A mussel‐inspired method to fabricate a novel reduced graphene oxide/Bi12O17Cl2 composites membrane for catalytic degradation and oil/water separation

In this study, a novel dopamine modified graphene‐based photocatalytic membrane with Bi₁₂O₁₇Cl₂ inserted was fabricated to modify the commercial cellulose acetate membrane via vacuum filtration method. Results showed the reduced graphene oxide (RGO)/poly(dopamine) (PDA)/Bi₁₂O₁₇Cl₂‐CA photocatalytic composite membrane exhibited 98% removal efficiency for methylene blue (MB) within 100 minutes and 96% removal efficiency for 4‐CP within 160 minutes. Importantly, the photocatalytic composite membrane can simultaneously achieve dye degradation and oil‐water separation in only one device within a short time. And the as‐prepared membrane displayed great antifouling performance and recyclability after 10 cycles. Meanwhile, the membrane showed excellent stability in the agitated water bath or different pH conditions. In summary, the photocatalytic membrane investigated in this study opens new avenue for treatment of wastewater.     

Visible Light Photocatalytic Functional TiO2/PVDF Nanofibers for Dye Pollutant Degradation

The photodegradation of poly(vinylidene fluoride) (PVDF)/titanium oxide (TiO₂) nanofibers under visible light is described, something that has not been previously reported in the literature. Visible light photocatalytic electrospun PVDF/TiO₂ nanofiber webs with anatase TiO₂ concentration varying from 0% to 20% (0%, 1%, 3%, 5%, 10%, and 20%) are produced, and their ability to degrade a toxic pollutant, Rhodamine B (RhB), is studied. Photodegradation study using UV–vis spectroscopy on PVDF/TiO₂ nanofiber webs (with TiO₂ concentration of 20%) shows that 80% of RhB is degraded within 6 h at the wavelength of 546 nm, which clearly falls within the visible spectra. The color of RhB solvent catalyzed by PVDF/TiO₂ nanofiber webs gradually changes from red to orange, then to yellow, further to light yellow till colorless, which suggests the complete photodegradation of RhB under visible light. To estimate the rate of photodegradation, the reaction constant k is calculated. Based on the k value, PVDF/TiO₂ nanofiber webs with 20% TiO₂ concentration show the highest degradation rate compared to other PVDF/TiO₂ nanofiber webs and pure TiO₂ nanoparticles. This study proves the viability of TiO₂‐based nanofibers to have catalytic capabilities under low‐energy visible light.