Study on the Relationship between Emulsion Properties and Interfacial Rheology of Sugar Beet Pectin Modified by Different Enzymes

The contribution of rheological properties and viscoelasticity of the interfacial adsorbed layer to the emulsification mechanism of enzymatic modified sugar beet pectin (SBP) was studied. The component content of each enzymatic modified pectin was lower than that of untreated SBP. Protein and ferulic acid decreased from 5.52% and 1.08% to 0.54% and 0.13%, respectively, resulting in a decrease in thermal stability, apparent viscosity, and molecular weight (Mw). The dynamic interfacial rheological properties showed that the interfacial pressure and modulus (E) decreased significantly with the decrease of functional groups (especially proteins), which also led to the bimodal distribution of particle size. These results indicated that the superior emulsification property of SBP is mainly determined by proteins, followed by ferulic acid, and the existence of other functional groups also promotes the emulsification property of SBP.     

从芒果皮中提取果胶的工艺研究

果胶是一种大分子多糖类物质 ,具有良好的胶凝作用 ,用途广泛 ,在国内外市场上的销量很好。 1 990年世界上果胶总产量约 2 5 0 0 0吨 ,而我国 1 990年仅在食品工业上消耗的果胶就达 1 0 0 0吨 ,但国内市场上销售的果胶大部分为进口货[1] 。果胶在我国的生产仍处于开发阶段 ,所以发掘新的提取资源、提高果胶质量、降低果胶生产成本的意义十分重大。目前 ,已有以柑桔皮、向日葵盘、苹果皮、香蕉皮、马铃薯渣为原料提取果胶的研究报道 ,如何从芒果皮中提取果胶却未见报道。芒果在制造罐头和饮料中副产大量下脚料———芒果皮 ,未能得到充分利用…     

Polysaccharides of Saponin-Bearing PLANTS. XII. Polysaccharides of Acantophyllum knorringianum and Their Biological Activity

The physicochemical properties and qualitative and quantitative monosaccharide composition of Acantophyllum knorringianum pectin were determined. It has been found using periodate-nitric-acid oxidation and IR spectroscopy that galacturonan is a polymer consisting of -1-4-bonded D-galacturonic acid units. The isolated polysaccharide from roots had immunostimulating activity.     

Elucidation of stabilizing pickering emulsion with jackfruit filum pectin-soy protein nanoparticles obtained by photocatalysis

There is still the dearth of reports of jackfruit filum pectin-based nanoparticles as the Pickering emulsifiers with respect to the applications in foods, cosmetics and medicines. So we fabricated soy protein-jackfruit filum pectin nanoparticles (SPP) by photocatalysis as Pickering emulsifier. Jackfruit filum pectin exhibited lower yield (17.31%), degree of methoxylation (15.53%), but higher galacuronic acid content (74.22%). A strong linkage between pectin and soy protein was formed by photocatalysis. The conjugated polymer could self-assemble into compact near globular nanoparticle. The mean size of SPP was larger than that of soy protein nanoparticles but smaller than that of soy protein-pectin complex without photocatalysis. Besides, the zeta potential of SPP was ?33.8?mV, significantly lower than that of soy protein nanoparticles but higher than that of control sample, further confirming that SPP surfaces were completely covered with pectin molecules. Compared with control sample, the three-phase contact angle increased from 42.7 to 90.6°, indicated that SPP could be developed as effective Pickering emulsifiers. The emulsions stabilized by SPP exhibited high thermal stability and excellent salt tolerance as well as good freeze-thaw stability in comparison with emulsions covered with control sample. These findings would provide a potential way of producing effective Pickering emulsifier.GRAPHICAL ABSTRACT     

The effect of high-power ultrasound on the rheological properties of strawberry pulp

This study investigated the effects of high-power ultrasound (HPU, 0–45 °C, 242–968 W/cm², 2–16 min) on the rheological properties of strawberry pulp. Following the HPU treatment, the strawberry pulp exhibited an increase in apparent viscosity, storage modulus (G′), and loss modulus (G″). The water-soluble pectin (WSP), pectin methylesterase (PME) activity, and free calcium ions (Ca²⁺) of the strawberry pulp after HPU treatment were investigated to determine a possible reason for this phenomenon. HPU caused a significant decrease in the degree of esterification (DE), molecular weight (Mw), and particle size of strawberry WSP, but no significant changes were evident in the galacturonic acid (GalA) content and the zeta (ζ)-potential (P > 0.05), resulting in decrease in the apparent viscosity. Moreover, the largest reduction of PME activity was 22.6% after HPU treatment at 605 W/cm² and 45 °C for 16 min, indicating that the PME was resistant to the HPU treatments. The free Ca²⁺ content in the strawberry pulp was significantly decreased after exposure to HPU (P < 0.05). The maximal reduction of 52.01% in the free Ca²⁺ was achieved at 605 W/cm² and 45 °C for 16 min. The overall results indicated that the high residual activity (RA) of PME after HPU might induce the low esterification of WSP, while HPU promoted the interaction of free Ca²⁺ and low-methylated pectin, to form the network structure of Ca²⁺-low-methylated pectin, resulting in an increase in viscosity in the complex strawberry system.     

The Effect of Volume Reorganization of Amorphous Poly(ethylene Terephthaiate) on Thermal Properties

When poly(ethylene terephthalate) was quenched from above T_g and then heated, it exhibited a step increase in thickness in the glass transition region at every rate tested. When the polymer was cooled more slowly than it was heated, a higher T_g and a slightly larger step increase in thickness were observed as the cooling rate was reduced. These experimental results appear to be adequately interpreted on the basis of the normal structural changes that occur in a glass as its thermal history is varied. Two observations, however, were not easily included in this view. First, the polymer, on cooling from above T_g, exhibited an abnormally high expansion coefficient over much of the range of temperature in which it exists as a fluid. Second, the polymer exhibited a step increase in thickness when it was heated at the same rate at which it had previously been cooled.     

Dynamic and Equilibrium Studies on Adsorption of Cu(II) Ions onto Biopolymeric Cross-Linked Pectin and Alginate Beads

Binary biopolymeric beads of alginate and pectin were prepared and characterized by FTIR spectra. On to the surfaces of the prepared beads were performed static and dynamic adsorption studies of Cu(II) ions at fixed pH and ionic strength of the aqueous metal ion solutions. The adsorption data were applied to Langmuir and Freundlich isotherm equations and various adsorption parameters were calculated. The influence of various experimental parameters such as effect of time, pH, temperature, solid to liquid ratio, and the presence of salts were investigated on the adsorption of copper ions.     

Silk‐Pectin Hydrogel with Superior Mechanical Properties,Biodegradability, and Biocompatibility

A new method is developed to prepare silk hydrogels and silk‐pectin hydrogels via dialysis against methanol to obtain hydrogels with high concentrations of silk fibroin. The relationship between the mechanical and biological properties and the structure of the silk‐pectin hydrogels is subsequently evaluated. The present results suggest that pectin associates with silk molecules when the silk concentration exceeds 15 wt%, suggesting that a silk concentration of over 15 wt% is critical to construct interacting silk‐pectin networks. The silk‐pectin hydrogel reported here is composed of a heterogeneous network, which is different from fiber‐reinforced, interpenetrated networks and double‐network hydrogels, as well as high‐stiffness hydrogels (elastic modulus of 4.7 ± 0.9 MPa, elastic stress limit of 3.9 ± 0.1 MPa, and elastic strain limit of 48.4 ± 0.5%) with regard to biocompatibility and biodegradability.     

A sustainable method of mitigating acid corrosion of mild steel using jackfruit pectin (JP) as green inhibitor: Theoretical and electrochemical studies

This study is attempted to develop a green corrosion inhibitor from a waste material of Jack fruit (Artocarpus heterophyllus). This method is therefore quite valuable to health, environment, and economic point of view. Pectin is isolated from the jackfruit peel waste using 0.05 ?N oxalic acid and used as an inhibitor for mild steel corrosion in acidic environment as it is highly water soluble. 250–1000 ?ppm of pectin was used in this study at a temperature range of 303–323 ?K. The protection efficiency of jack fruit pectin (JP) in 0.5 ?M HCl was evaluated by conventional weight loss and electrochemical techniques. The potentiodynamic polarization results revealed that JP could effectively reduce the corrosion of mild steel in acidic medium at 1000 ?ppm concentration with an inhibition efficiency of 89.75% and corrosion rate of 2.392 mpy. The mixed type behavior of the inhibitor is identified from Tafel polarization studies. Electrochemical impedance spectroscopy (EIS) measurements suggest that the corrosion inhibition process is kinetically controlled. adsorption and kinetic behavior of the inhibitor also have been studied. Surface manifestations were followed using FESEM and AFM techniques. DFT calculations and Monte Carlo simulations were also carried out to corroborate the experimental results with theoretical outputs and succeeded to a great extent.     

Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.