基于XPS对硫铁矿去除SeO2-3的机理研究

硒是动植物及人体生长必需的十五种微量元素之一，具有清除体内自由基、抗氧化、增强免疫力等功能，但其安全剂量的范围却很窄。利用扫描电子显微镜（SEM）和X射线衍射仪（XRD）对湿法球磨制备的硫铁矿形貌进行了表征。SEM观测发现加乙醇助磨后的硫铁矿为粒径大小较均匀的球形颗粒团聚体，粒径范围在17～200 nm之间，平均粒径138 nm。XRD衍射图谱中的特征峰与FeS₂衍射图谱中各峰位置基本一致，因此判定硫铁矿中主要化学组分为FeS₂，且图谱中基本没有杂峰，表明制备过程中并未混入杂质，样品纯度较高。实验结果表明，该法制备的硫铁矿具有颗粒粒径小、比表面积大、反应活性高等优点。研究中利用X射线光电子能谱仪（XPS）对硫铁矿去除水体中SeO2-₃的机理进行了研究。研究结果表明, （1）在较为广泛的实验pH范围（pH 2.2～11.5），硫铁矿均能有效去除水体中SeO2-₃，去除效率（除pH值7.8以外）均达到90%以上；（2）硫铁矿与SeO2-₃发生反应后，其主要组成元素的XPS特征峰结合能有所减小，表明硫铁矿表面发生了一定化学变化；（3）酸碱环境下硫铁矿去除SeO2-₃的机理不完全相同，酸性环境下，硫铁矿对SeO2-₃的去除是单纯的氧化还原过程，即硫铁矿中被酸活化的S2-₂将SeO2-₃还原为单质Se(0)，并且酸性越强，SeO2-₃去除效果越好；碱性环境下，SeO2-₃的去除过程中氧化还原与络合反应并存，硫铁矿表面有络合态Fe(OH)SeO₃和单质Se(0)两种存在形态，且碱性越强，络合态Fe(OH)SeO₃含量越高。以上研究结果为硫铁矿去除固定水体和土壤中以SeO2-₃为代表的可变价金属阴离子提供重要理论依据和应用基础。     

Biomolecular Release Stimulated by Electrochemical Signals at a Very Small Potential Applied

DNA release electrochemically stimulated by applying ?10 mV on the modified electrode was studied. The release process was based on the local (interfacial) pH change produced upon H₂O₂ reduction electrocatalyzed by the immobilized microperoxidase‐11. SiO₂ nanoparticles attached to the electrode surface and functionalized with trigonelline and boronic acid species changed their electrical charge from positive to negative upon the interfacial pH change, thus allowing electrostatic adsorption of negatively charged DNA on the positive interface and then its repulsion/release from the negative interface. The loaded/released DNA molecules were labeled with a fluorescent dye to allow easy detection of the released DNA molecules. The important feature of the developed system is the controlled DNA release upon applying very small electrical potential on the modified electrode.     

Mass cultivation of various algal species and their evaluation as a potential candidate for lipid production

Microalgae have been proposed as a promising source for biodiesel production. Focusing on algal strains for biodiesel production, efforts should be made to search new strains. Experiments were carried out to investigate the effects of growth parameters (nutrients, pH, light, aeration and temperature) and the oil percentage of eight algal strains (Chlorella sp., Cladophora sp., Hydrodictylium sp., Oedogonium sp., Oscillatoria sp., Spirogyra sp., Stigeocolonium sp., Ulothrix sp.). Results show that 6.5–7.5 is the optimum pH for the growth of all algal species. Temperature showed a greater variation (25°40°C). Ulothrix sp. gave more biomass productivity and is the most suitable strain for biodiesel production due to higher oil percentage (62%). Least biomass production was observed for Stigeocolonium sp. and least oil content was obtained from Hydrodictylium sp. It was observed that among these eight algal strains for biodiesel production, Ulothrix and Chlorella are the most promising algae species.     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

End group polarity and block symmetry effects on cloud point and hydrodynamic diameter of thermoresponsive block copolymers

Thermoresponsive block copolymers are of interest for delivery vehicles in the body. Often an interior domain is designed for the active agent and the exterior domain provides stability in the bloodstream, and may carry a targeting ligand. There is still much to learn about how block sequence and chain end identity affect micelle structure, size, and cloud points. Here, hydrophilic oligo(ethylene glycol) methyl ether acrylate and more hydrophobic di(ethylene glycol) methyl ether methacrylate monomers were polymerized to give amphiphilic block copolymers with amphiphilic chain ends. The block sequence and chain end identity were both controlled by appropriate choice of RAFT chain transfer agents to study the effect of ‘matched’ and ‘mismatched’ chain end polarity with amphiphilic block sequence. The affect of matching or mismatching chain end polarity and block sequence was studied on the hydrodynamic diameter, cloud point, and temperature range of the chain collapse on linear di‐ and triblock copolymers and star diblock polymers. The affects of matching or mismatching chain end polarity were significant with linear diblock copolymers but more complex with triblock and star copolymers. Explanations of these results may help guide others in designing thermoresponsive block copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2838–2848     

Reversibly light‐responsive biodegradable poly(carbonate) micelles constructed via CuAAC reaction

Light‐responsive poly(carbonate)s PEG₁₁₃‐b‐PMPC_n‐SP were synthesized via copper catalyzed azide‐alkyne cycloaddition reaction between azide‐modified spiropyran (SP‐N₃) and amphiphilic copolymer PEG₁₁₃‐b‐PMPC_n. PEG₁₁₃‐b‐PMPC₂₅‐SP can self‐assemble to biocompatible micelles with an average diameter of ～96 nm and a critical aggregation concentration of 0.0148 mg mL^?1. Under 365 nm UV light irradiation, the characteristic absorption intensity of merocyanine (MC) progressively increased and most of the micellar aggregations were disrupted within 10 min, suggesting the completion of the transformation of hydrophobic SP to hydrophilic MC. Subsequent exposuring the micelles to 620 nm visible light, spherical micelles aggregated again. The light‐controlled release and re‐encapsulation behaviors of coumarin 102‐loaded micelles were further investigated by fluorescence spectroscopy. This study provides a convenient way to construct smart poly(carbonate)s nanocarriers for controlled release and re‐encapsulation of hydrophobic drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 750–760     

Visible-Light Photoswitching by Azobenzazoles

Three visible-light responsive photoswitches are reported, azobis(1-methyl-benzimidazole) ( 1 ), azobis(benzoxazole) ( 2 ) and azobis(benzothiazole) ( 3 ). Photostationary distributions are obtained upon irradiation with visible light comprising approximately 80 % of the thermally unstable isomer, with thermal half-lives up to 8 min and are mostly invariant to solvent. On protonation, compound 1 H⁺ has absorption extending beyond 600 nm, allowing switching with yellow light, and a thermal half-life just under 5 minutes. The two isomers have significantly different pK_a values, offering potential as a pH switch. The absorption spectra of 2 and 3 are insensitive to acid, although changes in the thermal half-life of 3 indicate more basic intermediates that significantly influence the thermal barrier to isomerization. These findings are supported by high-level ab initio calculations, which validate that protonation occurs on the ring nitrogen and that the Z isomer is more basic in all cases.     

Effect of pH and excitation light wavelength on the activation energy of thermal quenching of tryptophan fluorescence

1. Download : Download high-res image (96KB)
2. Download : Download full-size image

     

Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.