硅和锗纳米线的原子排布和电荷分布的密度泛函紧束缚方法研究

低维硅锗材料是制备纳米电子器件的重要候选材料，是研发高效率、低能耗和超高速新一代纳米电子器件的基础材料之一，有着潜在的应用价值。采用密度泛函紧束缚方法分别对厚度相同、宽度在0.272 nm~0.554 nm之间的硅纳米线和宽度在0.283 nm~0.567 nm之间的锗纳米线的原子排布和电荷分布进行了计算研究。硅、锗纳米线宽度的改变使原子排布，纳米线的原子间键长和键角发生明显改变。纳米线表层结构的改变对各层内的电荷分布产生重要影响。纳米线中各原子的电荷转移量与该原子在表层内的位置相关。纳米线的尺寸和表层内原子排列结构对体系的稳定性产生重要影响。     

Mechanical property and deformation mechanism of gold nanowire with non-uniform distribution of twinned boundaries:A molecular dynamics simulation study

The mechanical property and deformation mechanism of twinned gold nanowire with non-uniform distribution of twinned boundaries(TBs) are studied by the molecular dynamics(MD) method. It is found that the twin boundary spacing(TBS) has a great effect on the strength and plasticity of the nanowires with uniform distribution of TBs. And the strength enhances with the decrease of TBS, while its plasticity declines. For the nanowires with non-uniform distribution of TBs, the differences in distribution among different TBSs have little effect on the Young's modulus or strength, and the compromise in strength appears. But the differences have a remarkable effect on the plasticity of twinned gold nanowire. The twinned gold nanowire with higher local symmetry ratio has better plasticity. The initial dislocations always form in the largest TBS and the fracture always appears at or near the twin boundaries adjacent to the smallest TBS. Some simulation results are consistent with the experimental results.     

Self-Assembly Anisotropic Magnetic Nanowire Films Induced by External Magnetic Field

Self-assembly generated materials induced by an external magnetic field have attracted considerable interest following the development of nanodevices. However, the fabrication of macroscopic and anisotropic magnetic films at the nanoscale remains a challenge. Here, anisotropic magnetic films are successfully prepared using a solution-based nanowire assembly strategy under a magnetic field. The assembly process is manipulated by changing the thickness of silica shell coated on the surface of magnetic nanowires. The anisotropic magnetic films show highly anisotropic magnetization under different angles of magnetic field and better magnetization properties than that of disordered magnetic films. The well-defined nanowire arrays enable magnetization anisotropic property which may be useful in the magnetic energy conversion technologies and biomedical sciences which lie far beyond those achievable with traditional magnetic materials.     

钛表面钠氢氧钛纳米线的结构、生物活性和MC3T3-E1细胞响应

采用化学方法处理微弧氧化(MAO)制备的含Si、Ca元素的Ti O2涂层(SC),获得钛氢氧钠(Na0.8H1.2Ti3O7)生物活性纳米线结构。化学处理过程中,SC涂料表面出现了Ca、Na元素溶解,Si元素沉积的现象。化学处理后的SC涂层比SC涂料具有更好的吸水性和诱导磷灰石形成能力。这与处理后涂层(SHTO)特殊的纳米结构有关,在模拟体液浸泡过程中更容易形成Ti-OH。同时,钠氢氧钛纳米线的表面形貌、相组成、OH基团以及良好的湿润能力使其更加适合于MC3T3-E1细胞的粘附和增值。     

不同孪晶界密度银纳米线拉伸形变行为的分子动力学模拟

采用分子动力学方法模拟了不同孪晶界密度银纳米线的拉伸形变行为, 分析了孪晶界密度对多晶银纳米线屈服强度、弹性模量和塑性变形机理的影响. 在弹性形变区域, 孪晶界的存在对杨氏模量变化的作用不明显. 在塑性形变阶段, 首先从表面边缘开始产生位错成核, 然后延伸并受阻于孪晶界. 在进一步拉伸载荷作用下, 孪晶界将作为位错源产生新的位错. 模拟结果表明, 银纳米线的强度与孪晶界和晶粒的尺寸有关. 孪晶界密度较小(即晶粒的长径比大于1)时, 此纳米线的屈服应力比单晶纳米线还要小, 只有当孪晶界密度较大时(即晶粒的长径比小于1), 孪晶界使得纳米线得到强化. 综合分析了孪晶界和晶粒尺寸对银纳米线的影响, 为构建高强度金属纳米线打下基础. 最后讨论了温度和拉伸速度对孪晶纳米线屈服应力所产生的影响, 随着温度的升高, 孪晶纳米线与单晶纳米线的屈服应力差先升高后趋于稳定; 当拉伸速度逐渐增大, 孪晶纳米线与单晶纳米线的屈服应力差先稳定后增大.     

泡沫镍负载Fe2O3@Ni3S2纳米线网状结构电极的制备及其电催化析氧性能

通过两步水热法制备泡沫镍(NF)负载Fe_2O_3纳米粒子@Ni_3S_2纳米线网状结构电极(Fe_2O_3@Ni_3S_2/NF)。运用X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、N_2吸附-脱附测试等方法对电极材料的物相和微观结构特征等进行了表征。水热条件下原位表面化学刻蚀生成的Ni_3S_2纳米线与三维多孔NF基体间拥有强结合力和低界面电阻,Fe_2O_3粒子均匀分布在纳米线的表面。在1 mol·L~(-1)的KOH溶液中,运用线性扫描伏安测试(LSV)、计时电位法、电化学交流阻抗测试(EIS)等对电极的电催化析氧(OER)性能进行了测试。结果表明:在100 mA·cm~(-2)的超高电流密度下,Fe_2O_3@Ni_3S_2/NF电极的OER过电势仅为223 mV,比Ni_3S_2/NF材料的过电势降低了285 mV;经过10 h计时电位测试,性能保持率高达80%。     

双层分等级TiO_2纳米线制备及其光伏性能研究

采用两步溶剂热反应制备了底层为分等级锐钛矿的TiO_2纳米线阵列,上层为分等级锐钛矿的TiO_2纳米线薄膜的双层结构电极.通过XRD和SEM对其组成和形貌进行了表征,并考察了纳米线薄膜对染料敏化太阳电池(DSSC)光伏性能的影响.实验结果表明,分等级锐钛矿的TiO_2纳米线作为DSSC的光阳极,光电转换效率为4.39%,其效率高于光滑的TiO_2纳米线光阳极电池效率(2.07%).     

Well-dispersed sulfur anchored on interconnected polypyrrole nanofiber network as high performance cathode for lithium-sulfur batteries

Preparation of novel sulfur/polypyrrole (S/PPy) composite consisting well-dispersed sulfur particles anchored on interconnected PPy nanowire network was demonstrated. In such hybrid structure, the as-prepared PPy clearly displays a three-dimensionally cross-linked and hierarchical porous structure, which was utilized in the composite cathode as a conductive network trapping soluble polysulfide intermediates and enhancing the overall electrochemical performance of the system. Benefiting from this unique structure, the S/PPy composite demonstrated excellent cycling stability, resulting in a discharge capacity of 931 mAh g⁻¹ at the second cycle and retained about 54% of this value over 100 cycles at 0.1 C. Furthermore, the S/PPy composite cathode exhibits a good rate capability with a discharge capacity of 584 mAh g⁻¹ at 1  C.     

Preparation and characterization of gold nanoparticles and nanowires loaded into rod-shaped silica by a one-step procedure

Rod-shaped mesoporous silica nanoparticles (RMSN) with built-in gold nanoparticles or thin gold nanowires in the pore channels were in situ synthesized via a one-step procedure. The insertion of a hydrophobic gold precursor into the mesopores of RMSN was reached through a micellar solubilization mechanism and gold nanoparticles were achieved through a thermal reduction. The resulting RMSN and Au-RMSN samples were characterized by using X-ray diffraction, transmission and scanning microscopies (TEM and SEM), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and solid-state Nuclear Magnetic Resonance (NMR). The interaction of Au precursor (a carbene complex) with the thiol group at the silica surface was identified and found to play a crucial role in the dispersion of the uniform metal nanoparticles at the internal surface of RMSN. Moreover, TEM micrographs revealed the absence of large gold particles outside the mesopore network. The shape of Au nanoparticles and their loading amount in the mesoporous silica could be easily tuned by altering the concentration of gold precursor.     

Recent progresses on solution-processed silver nanowire based transparent conducting electrodes for organic solar cells

Organic photovoltaics (OPVs) are considered as a future alternative for conventional silicon based solar cells, owing to their low cost, ease of production and high-throughput. The transparent conducting electrode (TCE) is a fundamental component of OPVs. Traditionally, indium tin oxide (ITO) has been mainly utilized as a TCE in OPV applications due to its relatively high transparency and low sheet resistance. However, increasing demand for the optoelectronic devices has led to large fluctuations in ITO prices in the past decade and ITO is known to account more than 50% of the total cost of OPV devices. Thus, it is believed that development of solution-processable alternative materials is of great importance in reducing the cost of OPVs. Numerous materials, including silver nanowires, carbon nanotubes, graphene and conducting polymers, have been offered as replacements for ITO. This article reviews recent progress on fabrication of TCE via solution based coating techniques of silver nanowires (Ag NWs). In addition, performance of the Ag NWs based TCE in OPVs is summarized. Finally, we explore the future outlook for Ag NWs based TCE at the end of the review.