Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.     

Preparation and adsorption property of novel inverse-opal hierarchical porous N-doped carbon microspheres

The design of pore structure is the key factor for the performance of porous carbon spheres.In this wo rk,novel micron-sized colloidal crystal microspheres consisting of fibrous silica(F-SiO_2) nanoparticles are firstly prepared by water-evapo ration-induced self-assembly of F-SiO_2 nanoparticles in the droplets of an inverse emulsion system to be used as sacrificial templates.Acrylonitrile(AN) was infiltrated in the voids of the F-SiO_2 colloidal crystal microspheres,and in-situ induced by ~(60)Co y-ray to polymerize into polyacrylonitrile(PAN).After the PAN-infiltrated F-SiO_2 colloidal crystal microspheres were carbonized and etched with HF solution,novel micron-sized inverse-opal N-doped carbon(IO-NC) microspheres consisting of hollow carbon nanoparticles with a hierarchical macro/meso-porous inner surface were obtained.The IO-NC microspheres have a specific surface area as high as 266.4 m~2/g and a molar ratio of C/N of 5.They have a good dispersibility in water,and show a high adsorption capacity towards rhodamine B(RhB) up to 137.28 mg/(g microsphe re).This work offers a way to obtain novel micron-sized hierarchical macro/meso-porous N-doped carbon microspheres,which opens a new idea to prepare high-performance hierarchical porous carbon materials.     

SiO2@Fe2O3核-壳结构催化剂的制备及表征

采用优化的Stöber法制备了平均粒径为230 nm的单分散球形SiO₂颗粒,并以此为内核,通过水解沉积法制备了不同壳层厚度的核-壳结构SiO₂@Fe₂O₃催化剂。采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、N₂物理吸附和X射线衍射分析(XRD)等手段对催化剂进行表征,探讨了不同制备条件对SiO₂@Fe₂O₃催化剂形貌的影响。结果表明,通过水解沉积法制备的SiO₂@Fe₂O₃催化剂具有明显的核-壳结构,并且保持了原始SiO₂核的球形形貌,Fe₂O₃纳米粒子通过-OH的氢键作用连接在SiO₂表面,形成了2~10 nm厚的Fe₂O₃均匀连续包覆层。     

一种温敏型超大孔生物分离介质的制备及表征

采用改性琼脂糖对超大孔聚苯乙烯微球进行亲水化修饰(Agap-PS),通过酰基化反应在微球表面引入溴乙酰基(Agap-PS-Br),然后利用原子转移自由基聚合(ATRP)反应在Agap-PS-Br表面接枝温敏聚合物刷,得到一种温敏型超大孔生物分离介质(Agap-PS-PNIPAM).考察了配体、催化剂、溶剂和温度对N-异丙基丙烯酰胺ATRP反应的影响,在优化条件下PNIPAM的接枝量达到了15.07 mg/m2.采用红外光谱(FTIR)、扫描电镜(SEM)、压汞分析、激光共聚焦和蛋白吸附等手段对温敏型超大孔生物分离介质进行一系列表征,结果表明接枝温敏聚合物刷后Agap-PS-PNIPAM具有良好的温敏性,没有堵塞微球的超大孔,微球对蛋白的非特异性吸附大大降低.由于温敏聚合物刷发生了从亲水到疏水构象的转变,40℃时Agap-PS-PNIPAM对蛋白的吸附量是25℃时的2.69倍.压力流速实验表明Agap-PS-PNIPAM柱具有背压低、渗透性和机械稳定性好的优点,同样地由于PNIPAM链在40℃时收缩,此时Agap-PS-PNIPAM柱的床层渗透系数比25℃时提高了15.7％.     

Synthesis and characterization of magnetic polymer microspheres with a core-shell structure

Non-porous magnetic polymer microspheres with a core-shell structure were prepared by a novel micro-suspension polymerization technique. A stable iron oxide ferrofluid was used to supply the magnetic core, and the polymeric shell was made of glycidyl methacrylate （GMA monomer） and ethylene dimethacrylate （cross-linker）. In the preparation, polyvinyl alcohol was used as the stabilizer, and a lauryl alcohol mixture as the dispersant. The influence of various conditions such as aqueous phase volume, GMA and initiator amounts, reaction time and stirring speed on the character of the microspheres was investigated. The magnetic microspheres were then characterized briefly. The results indicate that the microspheres with active epoxy groups had a narrow size distribution range from 1 to 10 μm with a volume-weighted mean diameter of 4.5 μm. The saturation magnetization reached 19.9 emu/g with little coercivity and remanence.     

Rectifying resistance switching behaviors of SnO2 microsphere films modulated by top electrodes

Based on the bipolar resistive switching (RS) characteristics of SnO₂ films, we have fabricated a new prototypical device with sandwiched structure of Metal/SnO₂/fluorine-doped tin oxide (FTO). The SnO₂ microspheres film was grown on FTO glass by template-free hydrothermal synthesis, which was evaporated with various commonly used electrodes such as aluminium (Al), silver (Ag), and gold (Au), respectively. Typical self-rectifying resistance switching behaviors were observed for the RS devices with Al and Au electrodes. However, no obvious rectifying resistance switching behavior was observed for the RS device with Ag electrode. Above results were interpreted by considering the different interface barriers between SnO₂ and top metal electrodes. Our current studies pave the ways for modulating the self-rectifying resistance switching properties of resistive memory devices by choosing suitable metal electrodes.     

Poly(vinylphosphonate)s functionalized polymer microspheres via rare earth metal‐mediated group transfer polymerization

We demonstrate a facile, yet efficient method for the functionalization of crosslinked polystyrene (PS) microspheres with biocompatible poly(vinylphosphonate)s via the combination of a UV grafting polymerization and a surface‐initiated group transfer polymerization. Self‐initiated photografting and photopolymerization of ethylene glycol dimethacrylate results in direct photografting of poly(ethylene glycol dimethacrylate) on the PS microspheres with dangling methacrylate functionalities, which are used to immobilize ytterbocene complexes to form the surface‐bound rare‐earth metal catalyst system. The surface‐initiated GTP of dialkyl vinylphosphonates from the initiator system leads to the functionalization of PS microspheres with poly(vinylphosphonate) brushes. Polymerization kinetic investigation indicates that surface‐initiated GTP leads to a constant and remarkably rapid weight gain of the microsphere (a microsphere weight increase of 600% within 3 min), owing to the highly living and efficient character of GTP. The surface‐initiated GTP occurring inside the microsphere causes an accumulation of the tension between the polymer chains in the microsphere, which eventually induces fracture of the microsphere for longer polymerization time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2919–2925     

Gadolinium‐Decorated Silica Microspheres as Redox‐Responsive MRI Probes for Applications in Cell Therapy Follow‐Up

The redox microenvironment within a cell graft can be considered as an indicator to assess whether the graft is metabolically active or hypoxic. We present a redox‐responsive MRI probe based on porous silica microparticles whose surface has been decorated with a Gd‐chelate through a disulphide bridge. Such microparticles are designed to be interspersed with therapeutic cells within a biocompatible hydrogel. The onset of reducing conditions within the hydrogel is paralleled by an increased clearance of Gd, that can be detected by MRI.