Dissolvable layered double hydroxide as a sorbent in dispersive micro‐solid phase extraction for the determination of acidic quinolones in honey by HPLC

This study presents a simple and green dispersive micro‐solid phase extraction method for preconcentration of acidic quinolones from honey prior to high performance liquid chromatography determination. A two‐dimensional nanostructured zinc‐aluminum layered double hydroxide was synthesized and used as the sorbent for dispersive micro‐solid phase extraction. Its different characteristics from conventional sorbents is that it is dissolvable in acidic solution (pH < 4). After the extraction, the analyte elution step was omitted and thus the use of organic solvents was avoided. The key parameters influencing the extraction efficiency such as the amount of sorbent, pH of sample solution, vortex time, type and volume of acidic solution were investigated and optimized. The method exhibited low limits of detection (3.0?5.0 ng/g), good linearity (10?2000 ng/g) with coefficients of determinations higher than 0.9991, acceptable precision (RSD<9.1%) and accuracy (RE<5.8%). The proposed method is fast, efficient, eco‐friendly, and suitable for the determination of acidic quinolones in honey samples.     

Hydrodynamic instability of premixed flame propagating in narrow planar channel in the presence of gas flow

The paper analyses the hydrodynamic instability of a flame propagating in the space between two parallel plates in the presence of gas flow. The linear analysis was performed in the framework of a two-dimensional model that describes the averaged gas flow in the space between the plates and the perturbations development of two-dimensional combustion wave. The model includes the parametric dependences of the flame front propagation velocity on its local curvature and on the combustible gas velocity averaged along the height of the channel. It is assumed that the viscous gas flow changes the surface area of the flame front and thereby affects the propagation velocity of the two-dimensional combustion wave. In the absence of the influence of the channel walls on the gas flow, the model transforms into the Darrieus–Landau model of flame hydrodynamic instability. The dependences of the instability growth rate on the wave vector of disturbances, the velocity of the unperturbed gas flow, the viscous friction coefficients and other parameters of the problem are obtained. It is shown that the viscous gas flow in the channel can lead, in some cases, to a significant increase in instability compared with a flame propagating in free space. In particular, the instability increment depends on the direction of the gas flow with respect direction of the flame propagation. In the case when the gas flow moves in the opposite direction to the direction of the flame propagation, the pulsating instability can appear.     

Micro/Nanoengineered α-Fe2O3 Nanoaggregate Conformably Enclosed by Ultrathin N-Doped Carbon Shell for Ultrastable Lithium Storage and Insight into Phase Evolution Mechanism

The Fe-based transition metal oxides are promising anode candidates for lithium storage considering their high specific capacity, low cost, and environmental compatibility. However, the poor electron/ion conductivity and significant volume stress limit their cycle and rate performances. Furthermore, the phenomena of capacity rise and sudden decay for α-Fe₂O₃ have appeared in most reports. Here, a uniform micro/nano α-Fe₂O₃ nanoaggregate conformably enclosed in an ultrathin N-doped carbon network (denoted as M/N-α-Fe₂O₃@NC) is designed. The M/N porous balls combine the merits of secondary nanoparticles to shorten the Li⁺ transportation pathways as well as alleviating volume expansion, and primary microballs to stabilize the electrode/electrolyte interface. Furthermore, the ultrathin carbon shell favors fast electron transfer and protects the electrode from electrolyte corrosion. Therefore, the M/N-α-Fe₂O₃@NC electrode delivers an excellent reversible capacity of 901 mA h g⁻¹ with capacity retention up to 94.0 % after 200 cycles at 0.2 A g⁻¹. Notably, the capacity rise does not happen during cycling. Moreover, the lithium storage mechanism is elucidated by ex situ XRD and HRTEM experiments. It is verified that the reversible phase transformation of α↔γ occurs during the first cycle, whereas only the α-Fe₂O₃ phase is reversibly transformed during subsequent cycles. This study offers a simple and scalable strategy for the practical application of high-performance Fe₂O₃ electrodes.     

Monodisperse silica nanoparticles coated with gold nanoparticles as a sorbent for the extraction of phenol and dihydroxybenzenes from water samples based on dispersive micro‐solid‐phase extraction: Response surface methodology

A selective and sensitive method was developed based on dispersive micro‐solid‐phase extraction for the extraction of hydroquinone, resorcinol, pyrocatechol and phenol from water samples prior to high‐performance liquid chromatography with UV detection. SiO₂, SiO₂@MPTES, and SiO₂@MPTES@Au nanoparticles (MPTES = 3‐mercaptopropyltriethoxysilane) were synthesized and characterized by scanning electronic microscopy, thermogravimetric analysis, differential thermogravimetric analysis, and infrared spectroscopy. Variables such as the amount of sorbent (mg), pH and ionic strength of sample the solution, the volume of eluent solvent (μL), vortex and ultrasonic times (min) were investigated by Plackett–Burman design. The significant variables optimized by a Box–Behnken design were combined by a desirability function. Under optimized conditions, the calibration graphs of phenol and dihydroxybenzenes were linear in a concentration range of 1–500 μg/L, and with correlation coefficients more than 0.995. The limits of detection for hydroquinone, resorcinol, pyrocatechol, and phenol were 0.54, 0.58, 0.46, and 1.24 μg/L, and the limits of quantification were 1.81, 1.93, 1.54, and 4.23 μg/L, respectively. This procedure was successfully employed to determine target analytes in spiked water samples; the relative mean recoveries ranged from 93.5 to 98.9%.     

稀有原人参二醇型皂苷的人肠道菌群生物转化

利用高分离度液相色谱-四极杆飞行时间质谱(RRLC-Q-TOF MS)和超高效液相色谱-三重四极杆质谱(UPLC-QQQ MS)定性定量分析了稀有原人参二醇型皂苷Rd, F₂, Rg₃, CK和Rh₂在离体人肠道菌群中的生物转化过程. 并将上述二醇型皂苷与人肠道菌群在体外厌氧, 37 ℃下共温孵育, 采用电喷雾质谱在负离子模式进行检测, 鉴定代谢产物, 监测其含量变化, 拟合代谢路径. 结果表明, 人参皂苷Rd主要被代谢为F₂, Rg₃, CK, Rh₂和PPD; 人参皂苷F₂主要被代谢为CK和PPD; 人参皂苷Rg₃主要被代谢为Rh₂和PPD; 人参皂苷CK和Rh₂主要被代谢为PPD. 在离体条件下, 人参皂苷Rd, F₂和Rg₃会被肠道菌群完全转化为其代谢产物, 而人参皂苷CK和Rh₂则不能被肠道菌群完全转化为其代谢产物. 原人参二醇型皂苷在人肠道菌群中的主要转化为脱糖基反应, 单糖苷和苷元是稀有原人参二醇型皂苷在人体内发挥药效的物质基础.     

Synthesis of Au nanorods via autocatalytic growth of Au seeds formed by sonochemical reduction of Au(I): Relation between formation rate and characteristic of Au nanorods

The sonochemical formation of Au seeds and their autocatalytic growth to Au nanorods were investigated in a one-pot as a function of concentration of HAuCl₄, AgNO₃, and ascorbic acid (AA). The effects of ultrasonic power and irradiation time were also investigated. In addition, the formation rate of Au nanorods was analyzed by monitoring the extinction at 400 nm by UV–Vis spectroscopy and compared with the growth behavior of Au seeds to nanorods. Most of the reaction conditions affected the yield, size, and shape of Au nanorods formed. It was confirmed that the concentration balance between HAuCl₄ and AA was important to proceed the formation of Au seeds and nanorods effectively. The formation rate became faster with increasing AA concentration and dog-bone shaped nanorods were formed at high AA concentration. It was also confirmed a unique phenomenon that the shape of Au nanorods changed even after the completion of the reduction of Au(I) in the case of short-time ultrasonic irradiation for Au seed formation.     

塔河油田超埋深碳酸盐岩油藏基质的力学试验研究

碳酸盐岩油气藏在全球范围内分布广泛,其中30%以上为缝洞型碳酸盐岩油气藏。在我国缝洞型油藏占已探明的碳酸盐岩油藏储量的2/3,是今后增储的主要领域。为准确揭示碳酸盐岩油藏基质的力学特性,本文以塔河油田奥陶系油藏地层为研究背景,通过现场深孔钻井取样得到埋深达5300~6200m的碳酸盐岩油藏基质岩样,并通过力学试验首次获得超埋深碳酸盐岩油藏基质的弹模、泊松比、抗压强度、抗拉强度、粘聚力、内摩擦角等力学参数,借助电镜扫描试验揭示出超埋深碳酸盐岩的微细观破裂机制。该项研究成果可为分析碳酸盐岩油藏溶洞的垮塌破坏机理提供有效的试验参数。     

A Priori Feedback Estimates for Multiscale Reaction-Diffusion Systems

We study the approximation of a multiscale reaction–diffusion system posed on both macroscopic and microscopic space scales. The coupling between the scales is done through micro–macro flux conditions. Our target system has a typical structure for reaction–diffusion flow problems in media with distributed microstructures (also called, double porosity materials). Besides ensuring basic estimates for the convergence of two-scale semi-discrete Galerkin approximations, we provide a set of a priori feedback estimates and a local feedback error estimator that help in designing a distributed-high-errors strategy to allow for a computationally e?cient zooming in and out from microscopic structures. The error control on the feedback estimates relies on two-scale-energy, regularity, and interpolation estimates as well as on a fine bookeeping of the sources responsible with the propagation of the (multiscale) approximation errors. The working technique based on a priori feedback estimates is in principle applicable to a large class of systems of PDEs with dual structure admitting strong solutions.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.     

侧链PEG基聚合物的制备及其催化酯化反应性能

聚乙二醇单(乙烯基苄基)醚(PEG-VBE)和聚乙二醇二(乙烯基苄基)醚(PEG-DVBE)是重要的可聚合聚乙二醇衍生物，可用于催化剂载体及功能高分子的合成。本文以氢氧化钾为碱，乙烯基苄基氯(VBC)与乙二醇、一缩二乙二醇、二缩三乙二醇、PEG400、PEG600和PEG1500反应，高效合成了一系列乙烯基苄基聚乙二醇衍生物，乙烯基苄基氯的转化率可达96%以上，PEG-VBE的分离收率为32 ~ 93%。乙烯基衍生物在过硫酸钾引发下聚合得到水溶性高分子，产物经1H NMR、ESI-HRMS及FT-IR分析表征。以制备的水溶性PEG基聚合物为微反应器，研究了苯甲酸与甲醇的酯化反应，PEG基聚合物与硫酸的体系对酯化反应具有很好地催化活性。在优化的条件下，苯甲酸的转化率可达99%以上，催化体系循环5次后，催化活性几乎没有下降