Performance evaluation of functionalized ordered mesoporous silica for VOCs adsorption by molecular dynamics simulation

Volatile organic compounds (VOCs) are growing pollutants now that cause the serious environmental pollution and threaten human health. The functionalized ordered mesoporous silica (FOMS) has attracted considerable attention in adsorbing VOCs. In this paper, the molecular dynamics simulation was used to simulate the adsorption performance of FOMS on VOCs (acetone, ethyl acetate and toluene). After simulating different pore sizes (2 nm, 3 nm and 4 nm) adsorption performances of ordered mesoporous silica (OMS) on VOCs, OMS with a pore size of 4 nm was selected to further study the influence of functional groups (vinyl, methyl, and phenyl). The following law was obtained: the saturated adsorption capacities of vinyl-functionalized OMS (V-FOMS) to acetone, ethyl acetate and toluene were 3.045 mmol.g^?1, 2.568 mmol.g^?1 and 1.976 mmol.g^?1 respectively; the saturated adsorption capacities of methyl-functionalized OMS (M-FOMS) to acetone, ethyl acetate and toluene were 2.798 mmol.g^?1, 2.312 mmol.g^?1 and 1.698 mmol.g^?1 respectively; the saturated adsorption capacities of phenyl-functionalized OMS (P-FOMS) to acetone, ethyl acetate and toluene were 2.124 mmol.g^?1, 1.941 mmol.g^?1 and 1.539 mmol.g^?1 respectively. These results show that the adsorption ability of FOMS for different adsorbates follows the sequence of acetone > ethyl acetate > toluene. Furthermore, the interaction between functional groups (vinyl, methyl and phenyl) in FOMS and VOCs was explored. It is found that the interaction between different functional groups and adsorbates is different (interaction energy effect). This interaction energy effect promotes FOMS to better adsorb VOCs. This work would provide fundamental understanding and guidance for the development of novel adsorption materials for the adsorption of VOCs.     

Hexagonal boron phosphide and boron arsenide van der Waals heterostructure as high-efficiency solar cell

The rapid development of two-dimensional (2D) materials offers new opportunities for 2D ultra-thin excitonic solar cells (XSCs). The construction of van der Waals heterostructure (vdWH) is a recognised and effective method of integrating the properties of single-layer 2D materials, creating particularly superior performance. Here, the prospects of h-BP/h-BAs vdW heterostructures in 2D excitonic solar cells are assessed. We systematically investigate the electronic properties and optical properties of heterogeneous structures by using the density functional theory (DFT) and first-principles calculations. The results indicate that the heterogeneous structure has good optoelectronic properties, such as a suitable direct bandgap and excellent optical absorption properties. The calculation of the phonon spectrum also confirms the well-defined kinetic stability of the heterstructure. We design the heterogeneous structure as a model for solar cells, and calculate its solar cell power conversion efficiency which reaches up to 16.51% and is higher than the highest efficiency reported in organic solar cells (11.7%). Our work illustrates the potential of h-BP/h-BAs heterostructure as a candidate for high-efficiency 2D excitonic solar cells.     

多形貌中空介孔SiO2的可控合成及复合物对Cu2+的吸附还原

以间苯二酚/甲醛(RF)树脂为软模板, 正硅酸乙酯(TEOS)为硅源, 十六烷基三甲基溴化铵(CTAB)为制孔剂, 采用一锅溶胶-凝胶法制备了多形貌中空介孔二氧化硅微球(HMSM). 通过改变甲醛用量调控软模板RF树脂的结构, 可以获得一系列不同形貌及结构的HMSM, 随着甲醛用量的增加, HMSM结构表现为单层壳空心球、 蛋黄壳空心球、 双层壳空心球等结构. 其中具有蛋黄壳空心球结构的HMSM比表面积可达691 m ²/g, 孔体积达2.23 cm ³/g, 孔径均匀(3.5 nm). 以硝酸铈铵为引发剂, 在具有蛋黄壳空心球结构的HMSM中引发丙烯腈自由基聚合, 并将支链聚丙烯腈上的氰基偕胺肟化, 制得HMSM接枝聚偕胺肟(HMSM-g-PAO). 以100 mg/L的CuCl₂溶液为目标溶液, 在pH=4.0时测试合成的HMSM-g-PAO对Cu ²⁺的吸附效果, 发现吸附平衡时Cu ²⁺吸附量达134 mg/g.     

Mesoporous Rh Emerging from Nanophase‐separated Rh‐Y Alloy

Mesoporous precious metals with abundant active sites and high surface area have been widely recognized as high‐performance catalytic materials. However, the templated synthesis is complex and costly. Herein, we report a mesoporous rhodium (m‐Rh) that can be readily synthesized from entangled nanofibres of Rh and Y₂O₃ without templates. The entangled nanofibres, prepared from uniform Rh‐Y alloys under redox atmosphere, were the key precursor in the synthesis processes. Moreover, the m‐Rh efficiently catalyzed carbon dioxide reforming of methane (DRM) at a low reaction temperature of 683 K. Further, electrochemical methods of CO electro‐oxidation were innovatively used to demonstrate the stability of CO and oxygen species for the DRM reaction.     

General Formation of Macro-/Mesoporous Nanoshells from Interfacial Assembly of Irregular Mesostructured Nanounits

Mesoporous core–shell nanostructures with controllable ultra-large open channels in their nanoshells are of great interest. However, soft template-directed cooperative assembly to mesoporous nanoshells with highly accessible pores larger than 30 nm, or even above 50 nm into macroporous range, remains a significant challenge. Herein we report a general approach for precisely tailored coating of hierarchically macro-/mesoporous polymer and carbon shells, possessing highly accessible radial channels with extremely wide pore size distribution from ca. 10 nm to ca. 200 nm, on diverse functional materials. This strategy creates opportunities to tailor the interfacial assembly of irregular mesostructured nanounits on core materials and generate various core–shell nanomaterials with controllable pore architectures. The obtained Fe,N-doped macro-/mesoporous carbon nanoshells show enhanced electrochemical performance for the oxygen reduction reaction in alkaline condition.     

Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Hierarchically Designed Three‐Dimensional Macro/Mesoporous Carbon Frameworks for Advanced Electrochemical Capacitance Storage

Mesoporous carbon (m‐C) has potential applications as porous electrodes for electrochemical energy storage, but its applications have been severely limited by the inherent fragility and low electrical conductivity. A rational strategy is presented to construct m‐C into hierarchical porous structures with high flexibility by using a carbon nanotube (CNT) sponge as a three‐dimensional template, and grafting Pt nanoparticles at the m‐C surface. This method involves several controllable steps including solution deposition of a mesoporous silica (m‐SiO₂) layer onto CNTs, chemical vapor deposition of acetylene, and etching of m‐SiO₂, resulting in a CNT@m‐C core–shell or a CNT@m‐C@Pt core–shell hybrid structure after Pt adsorption. The underlying CNT network provides a robust yet flexible support and a high electrical conductivity, whereas the m‐C provides large surface area, and the Pt nanoparticles improves interfacial electron and ion diffusion. Consequently, specific capacitances of 203 and 311 F g^?1 have been achieved in these CNT@m‐C and CNT@m‐C@Pt sponges as supercapacitor electrodes, respectively, which can retain 96 % of original capacitance under large degree compression.     

Synthesis of Mesoporous Wall‐Structured TiO2 on Reduced Graphene Oxide Nanosheets with High Rate Performance for Lithium‐Ion Batteries

Mesoporous wall‐structured TiO₂ on reduced graphene oxide (RGO) nanosheets were successfully fabricated through a simple hydrothermal process without any surfactants and annealed at 400 °C for 2 h under argon. The obtained mesoporous structured TiO₂–RGO composites had a high surface area (99 0307 m² g^?1) and exhibited excellent electrochemical cycling (a reversible capacity of 260 mAh g^?1 at 1.2 C and 180 mAh g^?1 at 5 C after 400 cycles), demonstrating it to be a promising method for the development of high‐performance Li‐ion batteries.     

基于二维材料WX_2构建的范德华异质结的结构和性质及应变效应的理论研究

二维材料过渡金属硫属化物(TMDs),因其优越的物理化学特性及其在光电子器件、光催化等领域的潜在应用价值,得到了人们的广泛关注。基于TMDs材料可以构建具有不同性能的范德华(vdW)异质结,但构建的异质结由于其固有的能带带隙大小限制了其在全光谱上的响应,因而对其能带带隙调控变得十分重要。本文基于第一性原理方法系统地研究了WX_2 (X=S, Se, Te)从单层到体相的结构和性质,以及由此组装的vdW异质结构WS_2/WSe_2、WS_2/WTe_2和WSe_2/WTe_2的结构和性质以及应力应变对异质结构的能带带隙的影响。结果表明:结合HSE06泛函和自旋轨道耦合(SOC)效应的计算方案可以精确描述WX_2体系;异质结构WS_2/WSe_2,WS_2/WTe_2和WSe_2/WTe_2呈现type-II能带分类;在施加单轴或双轴的应力应变后,能带带隙大小发生相应改变,当晶格形变大于4%后,异质结构由半导体特性变成具有金属性。这些研究为光电子器件的设计提供了重要的指导意义。