Melting thermodynamics of oligonucleic acids conjugated with relatively solvophobic linear polymers: A coarse‐grained molecular simulation study

Oligonucleic acids (ONAs), such as DNA and RNA, are used in various biotechnology and nanotechnology applications due to their ability to form a double helix that is stable at low temperature and melts at high temperatures. The melting temperature (T_m) of ONA duplexes can be tuned by the ONA composition, sequence, length and concentration, solvent quality, and salt concentration and by conjugation to other macromolecules. In this article, we use coarse‐grained (CG) molecular simulations to study ONAs conjugated with linear homopolymers that are relatively more solvophobic than the ONA. We study charged and stiff 8‐mer ONAs (e.g., DNA) and neutral and flexible 8‐mer ONAs (e.g., peptide nucleic acids or PNA), and vary the composition (or G‐C content) and sequence of ONA, conjugated homopolymer lengths and solvent quality for the polymer. For neutral and flexible ONAs, as the solvent quality worsens for the polymer, the ONA melting temperature increases from that of unconjugated ONA. The melting curves broaden with polymer length and worsening solvent quality, especially for ONAs with higher G‐C content. For charged and stiff ONAs, as the solvent quality worsens, the ONA melting temperature decreases compared to unconjugated ONA while the width of the melting curve remains the same. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1196–1208     

Size‐Dependence of the Melting Temperature of Individual Au Nanoparticles

Nanoparticles have an immense importance in various fields, such as medicine, catalysis, and various technological applications. Nanoparticles exhibit a significant depression in melting point as their size goes below ≈10 nm. However, nanoparticles are frequently used in high temperature applications such as catalysis where temperatures often exceed several 100 degrees which makes it interesting to study not only the melting temperature depression, but also how the melting progresses through the particle. Using high‐resolution transmission electron microscopy, the melting process of gold nanoparticles in the size range of 2–20 nm Au nanoparticles combined with molecular dynamics studies is investigated. A linear dependence of the melting temperature on the inverse particle size is confirmed; electron microscopy imaging reveals that the particles start melting at the surface and the liquid shell formed then rapidly expands to the particle core.     

Influence of the PVOH molar mass on the morphology and functional properties of EVOH/PVOH films prepared by melt blending

The influences of the molar mass (low, medium, and high) and content of poly(vinyl alcohol) (PVOH) dispersed by melt-blending in an ethylene vinyl alcohol (EVOH) copolymer on the morphology, microstructure, thermal, mechanical, and oxygen barrier properties were investigated. Multilayer films with external low-density polyethylene layers and inner EVOH/PVOH blend layer and respective monolayer films were elaborated and characterized. EVOH/PVOH blends exhibited a good compatibility because of the initial presence of PVOH segments in EVOH. The detailed quantitative analysis of the morphology performed for all blends showed that the finest dispersion was obtained with the PVOH with the lowest molar mass. The properties of the films as a function of the PVOH content and its molar mass were determined herein. Significant improvement of barrier properties was obtained at moderated water activities (up to a_w = 0.6) by using the PVOH with the lowest molar mass. Compared to the neat EVOH material, the oxygen permeability coefficients decreased by a factor 2 by adding 15 vol% PVOH while the thermal and mechanical properties remained similar.     

电感耦合等离子体原子发射光谱法(ICP-OES)测定铍铀伴生矿石中的铍

建立了电感耦合等离子体原子发射光谱法(ICP-OES)测定铍铀伴生矿石中的铍的方法,研究了酸溶-碱熔融法溶样过程中加入的焦硫酸钾,对ICP-OES法测定铍铀伴生矿石中的铍含量产生的基体干扰问题。主要阐述消除基体干扰的一些措施。从实验数据可知,控制称样量、焦硫酸钾加入量、定容体积和加标稀释倍数,能够有效消除焦硫酸钾对ICP-OES法测定结果的基体干扰,6次平行测定结果的相对标准偏差为3.4%,加标回收率为98.7%~104.4%,实验表明,方法准确、可靠。     

Preparation and characterization of poly(m-xylylene oxamide) and its copolymer

New polyoxamides, poly(m-xylylene oxamide) (PMXD2) and its copolymer with 2-methyl-1,5- pentanediamine (P(MXD2/M52)) with relative viscosity up to 4.6 were synthesized via spray/solid state polymerization. The obtained polyoxamides were characterized by FTIR, NMR, WAXD, DSC and TGA. The T_m of the copolymers decreased with increasing percentage of poly(2-methyl-1,5- pentaneoxamide) (PM52) in the copolymer from 346°C for 100% poly(meta-xylyleneoxamide) (PMXD2) to 277°C for copolymers of PMXD/PM52 (60/40). TGA analysis revealed that the thermal stability of the copolymers compared well with commercial PA6 and XRD studies suggested the copolymers possessed high crystallinity. DMA profile of the PMXD/PM52 (70/30) copolymer showed better mechanical performance with a storage modulus of about 7.2 GPa as compared to 1.8 GPa of PA6 at 25°C.     

Polymorphism of a widely used building block for halogen‐bonded assemblies: 1,3,5‐trifluoro‐2,4,6‐triiodobenzene

After reporting the structure of a new polymorph of 1,3,5‐trifluoro‐2,4,6‐triiodobenzene (denoted BzF3I3 ), C₆F₃I₃, (I), which crystallized in the space group P 2₁/c , we perform a comparative analysis with the already reported P 2₁/n polymorph, (II) [Reddy et al. (2006). Chem. Eur. J. 12 , 2222–2234]. In polymorph (II), type‐II I…I halogen bonds and I…π interactions connect molecules in such a way that a three‐dimensional structure is formed; however, the way in which molecules are connected in polymorph (I), through type‐II I…I halogen bonds and π–π interactions, gives rise to an exfoldable lamellar structure, which looks less tightly bound than that of (II). In agreement with this structural observation, both the melting point and the melting enthalpy of (I) are lower than those of (II).     

Duplex dual-labeled fluorescence probe-based melting curve and endpoint genotyping assays for genotyping of rs2000999 and haptoglobin gene deletion

Haptoglobin (Hp) is a hemoglobin-binding serum glycoprotein. Some variations in the Hp gene (HP) or Hp-related gene (HPR), including a single-nucleotide polymorphism in intron 2 of HRP, rs2000999, and a complete deletion of the HP gene (HP^del), one of the rare variants of HP, have been reported to correlate with the serum cholesterol concentration as well as the serum Hp concentration. In this study, we developed a duplex dual-labeled fluorescence probe-based method to simultaneously determine the rs2000999 G > A polymorphism by melting curve genotyping and the zygosity of HP^del by endpoint genotyping. This method was then validated by using the genomic DNA from 94 Japanese subjects for whom genotypes of rs2000999 and HP^del zygosity had already been determined. The results obtained with this method were in perfect agreement with the previous ones. Thus, the present method enables us to estimate these two polymorphisms in relatively large-scale groups of subjects, especially in Asian populations where the HP^del is distributed.     

NUMERICAL SIMULATION OF TRANSIENT THERMAL FIELD IN LASER MELTING PROCESS

Numerical simulation of thermal field was studied in laser processing. The 3-D finite element model of transient thermal calculation is given by thermal conductive equation. The effects of phase transformation latent are considered. Numerical example is given to verify the model. Finally the real example of transient thermal field is given.     

超高速冲击铝双层板的熔化效应

对超高速冲击铝双层板的熔化效应进行了实验研究和数值模拟，用扫描电镜观察后板的弹坑发现：当弹丸碰撞速度超过５ｋｍ／ｓ时，后板出现熔坑；随着弹丸碰撞速度的增加，后板熔坑数目亦随之增加，碎片云对后板的破坏明显减弱。数值模拟表明，击波加热和塑性功加热是熔化的两种机制，有关熔化主要特征的数值模拟结果与实验结果基本吻合。