气相输运沉积制备c轴择优取向的碘化铋薄膜

铋基卤化物材料因其无毒和优良的光电性能而显示出巨大的应用潜力。BiI₃作为一种层状重金属半导体,已被用于X射线检测、γ射线检测和压力传感器等领域,最近其作为一种薄膜太阳能电池吸收材料备受关注。本文采用简单的气相输运沉积(VTD)法,以BiI₃晶体粉末作为蒸发源,在玻璃基底上得到高质量c轴择优取向的BiI₃薄膜。并通过研究蒸发源温度和沉积距离对薄膜物相和形貌的影响,分析了BiI₃薄膜择优生长的机理。结果表明VTD法制备的BiI₃薄膜属于三斜晶系,其光学带隙为~1.8 eV。沉积温度对薄膜的择优取向有较大影响,在沉积温度低于270 ℃时,沉积的薄膜具有沿c轴择优取向生长的特点,超过此温度,c轴择优取向生长消失。在衬底温度为250 ℃、沉积距离为15 cm时制备的薄膜结晶性能最好,晶体形貌为片状八面体。     

新型多孔材料用作色谱手性固定相

手性固定相是色谱法分离分析手性化合物的关键。近年来,随着材料科学的迅速发展,越来越多的新型手性材料被作为色谱固定相用于手性分离分析。本文综述了近5年来液相色谱、气相色谱和毛细管电色谱领域的新型手性固定相的研究进展,重点总结了基于手性多孔材料的新型手性固定相研究,最后对手性固定相的研究进行了总结与展望。     

Ionic liquid-functional MCM-41 as a high effective catalyst for the synthesis of isatylidene malononitrile via Knoevenagel condensation

Ionic liquid functional MCM-41 was synthesized, characterized and used as heterogeneous catalyst for the Knoevenagel condensation of isatins with malononitrile. A series of corresponding isatylidene malononitrile were obtained in high isolated yield (96–99%) at room temperature in a short time. The heterogeneous catalyst can be easily recovered by centrifugation and showed almost no loss of activity over 10 recycle experiments. At the same time, the gram-scale experiments showed excellent yields and provided a highly effective method for scale up applications.     

A novel UPLC–MS/MS method for simultaneous quantification of trigonelline, 4-hydroxyisoleucine,and diosgenin from Trigonella foenum-graecum extract: Application to pharmacokinetic study in healthy and type 2 diabetic rats

Trigonelline (TR), 4-hydroxyisoleucine (4-HI), and diosgenin (DG) are the main bioactives of the purified standardized extract of the popular plant Trigonella foenum-graecum L. (TFG), and it has been proven effective for the treatment of various diseases. However, to the best of our knowledge, no study has investigated the pharmacokinetic parameters of purified standardized T. foenum-graecum extract in normal and diabetic Wistar rats. The present study has developed and validated a rapid, reliable, and sensitive simultaneous ultra-performance liquid chromatography MS method to estimate these bioactives. The chromatographic separation was achieved using methanol, acetonitrile, and 0.1% formic acid with the ideal gradient flow system on a BEH Shield RP 18 column. A positive electrospray ionization mode was selected to estimate m/z values of TR (138.14 > 94.63), 4-HI (148.19 > 74.08), and DG (415.54 > 271.33). The method was robust and reproducible over the linearity range of 60–5000, 6–5000, and 15–5000 ng/mL for TR, 4-HI, and DG, respectively. Using this novel validated method, we investigated the pharmacokinetic parameters of bioactives using Phoenix WinNonlin version 8.0 (Certera) in normal and diabetic rats. The assay was successfully applied for the estimation of pharmacokinetic parameters using noncompartmental analysis. This investigation shows that the absorption rate increased, whereas distribution and elimination processes slowed down in diabetic rats compared with normal rats.     

Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

A gadolinium-based magnetic ionic liquid for supramolecular dispersive liquid–liquid microextraction followed by HPLC/UV for the determination of favipiravir in human plasma

Favipiravir is a potential antiviral medication that has been recently licensed for Covid-19 treatment. In this work, a gadolinium-based magnetic ionic liquid was prepared and used as an extractant in dispersive liquid–liquid microextraction (DLLME) of favipiravir in human plasma. The high enriching ability of DLLME allowed the determination of favipiravir in real samples using HPLC/UV with sufficient sensitivity. The effects of several variables on extraction efficiency were investigated, including type of extractant, amount of extractant, type of disperser and disperser volume. The maximum enrichment was attained using 50 mg of the Gd-magnetic ionic liquid (MIL) and 150 μl of tetrahydrofuran. The Gd-based MIL could form a supramolecular assembly in the presence of tetrahydrofuran, which enhanced the extraction efficiency of favipiravir. The developed method was validated according to US Food and Drug Administration bioanalytical method validation guidelines. The coefficient of determination was 0.9999, for a linear concentration range of 25 to 1.0 × 10⁵ ng/ml. The percentage recovery (accuracy) varied from 99.83 to 104.2%, with RSD values (precision) ranging from 4.07 to 11.84%. The total extraction time was about 12 min and the HPLC analysis time was 5 min. The method was simple, selective and sensitive for the determination of favipiravir in real human plasma.     

Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

突出矿井瓦斯抽放限制影响因素的AHP-熵权法评价模型

为提高煤与瓦斯突出矿井瓦斯抽放效果,建立了3个一级指标、14个二级指标的突出矿井瓦斯抽放限制影响因素评价指标体系,利用AHP和熵权法分别确定指标因子主、客观权重.通过实地调研分析和反馈验证了AHP-熵权法的可行性和正确性,利用加权平均法确定评价模型的综合权重.研究表明:封孔方式、钻孔半径、抽放时间、煤体裂隙发育程度和抽放负压是目前影响煤矿瓦斯抽放效果的主控因素.     

原位液相透射电子显微镜及其在 纳米粒子表征方面的应用

近年来,基于透射电子显微技术、微纳加工技术和薄膜制造技术的发展,原位液相透射电子显微技术产生,为构建多种纳米级分辨率尺度下的微实验平台,发展新型纳米表征技术和众多领域的相关研究提供了途径.本文首先介绍了应用于原位液相透射电子显微技术的液体腔设计要求,然后介绍了液体腔的发展和典型的制备工艺,最后综述了近年来液体腔透射电子显微镜在纳米粒子成核和生长方面的应用研究,并探讨了该技术前沿发展面临的机遇和挑战.本文将为提高我国先进纳米表征技术和原子精准构筑技术提供相关讨论和支持.