Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Pd(0) nanoparticles immobilized on multinitrogen functionalized halloysite for promoting Sonogashira reaction: studying the role of the number of surface nitrogens in catalytic performance

Halloysite nanoclay, Hal, was amine-functionalized and subsequently reacted with 2,4,6-trichloro-1,3,5-triazine, TCT, and ethylenediamine, EDA, to provide multinitrogen containing functionality on the surface of Hal. The resulting surface-modified Hal, Hal-2N-TCT-EDA, was then used for immobilization of Pd nanoparticles and affording a heterogeneous catalyst, Pd@Hal-2N-TCT-EDA, with utility for copper and ligand-free Sonogashira coupling of alkynes and aryl halides. The results established the efficiency of this protocol in terms of product yield, ecofriendly nature, and reaction time. Study of the reusability of the catalyst confirmed that the catalyst could be recovered and recycled up to seven times with slight loss of catalytic activity and Pd leaching, indicating the efficiency of Hal-2N-TCT-EDA for embedding Pd nanoparticles. To elucidate the role of the number of surface nitrogens on the catalytic performance, the catalytic activity, and recyclability of the catalyst was compared with those of Hal-2N and Hal-2N-TCT. It was found that more surface nitrogen atoms gave higher loading of Pd and lower Pd leaching. This result confirms the contribution of surface nitrogens to anchor the Pd species and suppress leaching.

     

Manufacturing,thermal stability,and flammability properties of polypropylene containing new single molecule intumescent flame retardant

Melamine salt of pentaerythritol phosphate kaolin (MPPK) was synthesized by the reaction of pentaerythritol phosphate with kaolin (K) and melamine. The structure of MPPK was confirmed by EDXS, ¹H NMR, FTIR, and XRD. MPPK was blended with polypropylene (PP) at different loading levels. Thermogravimetric analysis (TGA) results showed that MPPK improved the thermal stability of PP at high temperatures in all PP composites. Vertical burning rate test manifested that PP composites can achieve V0 at 20% and 25% MPPK loading levels. Cone calorimeter data exhibited that addition of 25% MPPK to PP reduced peak of heat release rate (pHRR) and total heat release (THR) by 86% and 76% and increased the char residue after test to 67%. The results of PP/25% MPPK composite were compared with the data obtained from PP containing 25% K and 25% of traditional intumescent flame retardant composed of melamine phosphate (MP), pentaerythritol (PE), and K. The outcomes indicated that MPPK was more efficient in flame retardancy than the other systems. The digital photographs and SEM images for char residue demonstrated that MPPK succeeded in forming cellular and coherent char layer on the PP surface. The main advantage of adding 25% MPPK to PP was its ability to preserve nearly the inner half of the sample without burning after cone calorimeter test.     

磷酸浸渍黏土砖中五氧化二磷含量测定方法的改进

研究了磷钼酸铵容量法测定磷酸浸渍黏土砖中五氧化二磷含量的方法,对国家标准分析方法进行了改进,讨论了不同实验条件对实验结果的影响,并进行了精密度和准确度实验。结果准确、重现性好,证明方法可靠。     

Effect of Acid Treatment of Montmorillonite on “Support‐Activator” Performance to Support Metallocene for Propylene Polymerization Catalyst

This work is focused on montmorillonite (MMT)‐based “support‐activators” (S‐As) for the metallocene‐catalyzed propylene polymerization. This catalyst was previously industrialized; however, for further technological advances, the activation mechanism is investigated. The chemical and morphological requirements of the S‐A are surveyed using both commercially available raw clay minerals (non‐acid‐treated) and acid‐treated clay minerals. The S‐A possessing strong‐acid sites (pK a < ?8.2) gives a highly active catalyst. Acid treatment of MMT induces morphological changes as well as the formation of strong acid sites. Based on pore size distribution analysis and atomic force microscopy observations, it is concluded that the strong acid sites are located in the small pores around the edge of the clay mineral (not in the interlayer), where the structure is disordered by the acid treatment.

     

Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.     

Antibacterial and antifungal LDPE films for active packaging

Active antimicrobial packaging is a promising form of active packaging that can kill or inhibit microorganism growth in order to maintain product quality and safety. One of the most common approaches is based on the release of volatile antimicrobial agents from the packaging material such as essential oils. Due to their highly volatile nature, the challenge is to preserve the essential oils during the high‐temperature melt processing of the polymer, while maintaining high antimicrobial activity for a desired shelf life. This study suggests a new approach in order to achieve this goal. Antimicrobial active films are developed based on low‐density polyethylene (LDPE), organo‐modified montmorillonite clays (MMT) and carvacrol (used as an essential oil model). In order to minimize carvacrol loss throughout the polymer compounding, a pre‐compounding step is developed in which clay/carvacrol hybrids are produced. The hybrids exhibit a significant increase in the d‐spacing of clay and enhanced thermal stability. The resulting LDPE/(clay/carvacrol) films exhibit superior and prolonged antibacterial activity against Escherichia coli and Listeria innocua, while polymer compounded with pure carvacrol loses the antibacterial properties within days. The films also present an excellent antifungal activity against Alternaria alternata, used as a model plant pathogenic fungus. Furthermore, infrared spectroscopy analysis of the LDPE/(clay/carvacrol) system displayed significantly higher carvacrol content in the film as well as a slower out‐diffusion of the carvacrol molecules in comparison to LDPE/carvacrol films. Thus, these new films have a high potential for antimicrobial food packaging applications due to their long‐lasting and broad‐spectrum antimicrobial efficacy. Copyright © 2014 John Wiley & Sons, Ltd.     

软粘土卸载特性计算模型研究

本文从三个方面对软粘土的卸载特性进行了理论研究。采用太沙基一维固结理论，编制了内嵌固结计算的修正剑桥模型程序．对软粘土卸载强度进行了分析。推导了基于修正剑桥模型的孔压表达式并编制了相应的程序对软粘土的卸载孔压特性进行了研究，结果显示，在伸长条件下．孔压先由零逐渐发展到负的最大值．然后又逐渐减小至零。突破零位后，发展成为正孔压并最后达到正的最大值。围压越大，产生的负孔压的极值越大，最终的正孔压越小。将传统边界面模型的线弹性卸载过程改进为弹塑性．建立了软粘土的边界面广义弹塑性模型，从而使边界面模型可用于分析软粘土卸载过程中的塑性变形问题。理论分析结果与试验进行了比较验证，证明理论研究方法是可行的。     

基于孔压静力触探(CPTU)测试的连云港海相粘土前期固结压力确定方法研究

首先回顾了基于孔压静力触探(CPTU)测试确定前期固结压力的方法,通过连云港海相粘土场地进行的CPTU试验资料,以室内固结试验得到的前期固结压力作为参考值评估了经验方法预测前期固结压力的有效性。最简单的方法是直接建立前期固结压力和净锥尖阻力的关系,同时也是最有效的方法。     

某软土深基坑工程时间效应有限元分析

软土地区的深基坑因土体的固结作用和流变性而具有了时间效应。本文以Biot固结有限元法为基础,用三元件模型中的第一个线性弹簧模拟固结作用,弹性模量考虑了开挖应力路径和应力历史的影响;另外一部分(KELVIN模型)来模拟土体的流变性,以实际变形的反演来得到两个参数的大致取值,再对基坑的变形情况以及进一步开挖进行分析。假定为正常固结饱和粘土,平面应变问题。通过对某饱和软粘土地基深基坑开挖工程实例的分析,得到的挡墙水平位移曲线与实测曲线很吻合,表明程序较好地反映出基坑的时间效应。