氧化钙改性高岭土对垃圾渗滤液中氨氮的去除研究

采用氧化钙对高岭土进行改性,并用XRD、SEM和FT-IR对改性高岭土进行了表征。将改性高岭土应用于垃圾渗滤液的处理,考察了改性高岭土投加量、渗滤液初始pH、时间等因素对氨氮去除效果的影响,并对其吸附机理进行了研究。结果表明,氧化钙改性高岭土的产物主要是胶凝材料水化物(硅铝酸钙和含Al的C-S-H凝胶),形貌为蜂窝状;向氨氮含量为3520mg/L、pH为7.53~7.80的垃圾渗滤液中投加160g/L吸附剂,吸附60min,氨氮的去除率达82.66%,吸附量为18.19mg/g。氧化钙改性高岭土对氨氮的吸附符合Langmuir等温模型,动力学上符合准二级动力学方程,其相关系数分别为0.9678,0.9989。同时,该吸附过程包含了膜扩散和颗粒内扩散。     

Effect of Aging on the Synthesis of Kaolin-Based Zeolite Y from Ahoko Nigeria Using a Novel Metakaolinization Technique

Zeolite Y was systematically synthesized from Ahoko Nigerian kaolin in a conventional hydrothermal system using novel metakaolinization technique. The effect of aging on the formation of zeolite phase was investigated during the course of the synthesis. A rapidly processed metakaolin at a temperature of 600°C and exposure time of 50 minutes, which is capable of reducing the energy and cost of producing it was used to study the synthesis of zeolite Y. It was found that aging conditions play a prominent role in the preparation of zeolite Y from Ahoko metakaolin. Aging played a significant role by increasing the crystallinity of the final product even though zeolite Y was obtain without aging. The outcome of zeolite Y synthesized from Ahoko kaolin in 9 hours at 100°C was different from most reports on the synthesis of zeolite Y from kaolin where longing time (72 hours) of crystallization are reported.     

Manufacturing,thermal stability,and flammability properties of polypropylene containing new single molecule intumescent flame retardant

Melamine salt of pentaerythritol phosphate kaolin (MPPK) was synthesized by the reaction of pentaerythritol phosphate with kaolin (K) and melamine. The structure of MPPK was confirmed by EDXS, ¹H NMR, FTIR, and XRD. MPPK was blended with polypropylene (PP) at different loading levels. Thermogravimetric analysis (TGA) results showed that MPPK improved the thermal stability of PP at high temperatures in all PP composites. Vertical burning rate test manifested that PP composites can achieve V0 at 20% and 25% MPPK loading levels. Cone calorimeter data exhibited that addition of 25% MPPK to PP reduced peak of heat release rate (pHRR) and total heat release (THR) by 86% and 76% and increased the char residue after test to 67%. The results of PP/25% MPPK composite were compared with the data obtained from PP containing 25% K and 25% of traditional intumescent flame retardant composed of melamine phosphate (MP), pentaerythritol (PE), and K. The outcomes indicated that MPPK was more efficient in flame retardancy than the other systems. The digital photographs and SEM images for char residue demonstrated that MPPK succeeded in forming cellular and coherent char layer on the PP surface. The main advantage of adding 25% MPPK to PP was its ability to preserve nearly the inner half of the sample without burning after cone calorimeter test.     

谷胱甘肽在高岭土修饰碳糊电极上的电化学研究

制备了高岭土修饰碳糊电极(KCPE),并以氢醌(HQ)为电催化介质测定还原型谷胱甘肽(GSH)。实验结果表明,在该电极上谷胱甘肽(GSH)的加入对氢醌的电化学响应有明显提高,且电催化氧化峰电流与GSH浓度呈良好的线性关系,由此可采用差分脉冲伏安法(DPV)对GSH进行定量测定。对修饰电极的电化学性能进行了表征,测得电极有效表面积为0.118 6 cm2、电荷传递系数为0.68、表观速率常数为1.08×104cm3·mol-1·s-1。在优化条件下,测得GSH在KCPE上的线性范围为0.1~1,2.5~25μmol/L,检出限为0.073μmol/L。用该方法对含GSH的市售药进行测定,结果满意。     

Mechanical,Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites

The meta kaolin (MK) clay particulate filler with different weight ratios viz., 0, 5, 10, 20 and 30 wt% were incorporated into castable polyurethane (PU)/polystyrene (PS) (90/10) interpenetrating polymer network (IPN). The effects of MK particulate filler loading on the mechanical and thermal properties of PU/PS (90/10) IPN composites have been studied. From the tensile behavior, it was noticed that a significant improvement in tensile strength and tensile modulus as an increase in MK filler content. Thermogravimetric analysis (TGA) data reveals the marginal improvement in thermal stability after incorporation of MK filler. TGA studies of the IPN composites have been performed in order to establish the thermal stability and their mode of thermal degradation. It was found that degradation of all composites takes place in two steps. Degradation kinetic parameters were obtained for the composites using three mathematical models. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic (SEM) technique.     

Influence of catalyst binder on the acidity and activity/selectivity of Ga/H-ZSM-5 zeolite in propane aromatization

The acidity and initial and time-on-stream activity in propane aromatization (at 550°C, space velocity of 3100 cm³g⁻¹ _(zeolite)h⁻¹) of Ga-impregnated H-ZSM-5 zeolite without or with binders (50 wt%), such as silica, alumina and kaolin, have been investigated. Both the acidity and catalytic activity of the zeolite are influenced by the presence of binder in the catalyst, depending upon the binder. The influence is found to be lowest for alumina and highest for kaolin. Among the binders, alumina is the most preferred binder for the zeolite catalyst.     

氧化钙和氟化钾负载高岭土固体碱催化制备新型生物柴油

以高岭土为载体,利用浸渍法制备了氧化钙和氟化钾负载高岭土固体碱(GCK);利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(FT-IR)和哈密特指示剂法等技术手段对催化剂进行表征;考察了KF负载量和反应条件对月桂酸甲酯(ML)与乙二醇单甲醚(EGME)酯交换反应制备新型生物柴油产率的影响。 结果表明,GCK碱强度(H_)在7.2~18.4之间,KCaF₃为主要活性组分,当氟化钾负载量为25%、EGME与ML摩尔比3.0、催化剂用量相对于ML的质量分数为4.5 %、120 ℃下反应2 h,新型生物柴油的收率高达97.1%。 最后对催化剂的重复利用性能进行了考察。     

甜菜碱OSB-12@高岭土杂化材料对染料吸附机理研究

实验设计以硅酸铝为实体框架、十二烷基乙氧基磺基甜菜碱(OSB-12)为功能有机物, 通过共沉淀法合成同时吸附阴、阳离子染料的纳米材料. 借助FT-IR, SEM以及比表面孔隙分析等多种手段表征该吸附材料的结构、形貌. 材料通过静电纺丝制备成微米纤维, 解决了材料的便捷、完全回收问题, 且对阴、阳离子染料均有良好吸附效果, 吸附速率快. 结果表明, 弱酸性桃红B和碱性艳蓝BO吸附量分别达到471和847 mg/g, 论文详细讨论了染料的吸附机理, 电荷作用在离子型染料吸附过程中起主导作用, 即包埋在材料中的两性表面活性剂OSB-12发挥着离子交换的功能. 从染料去除率和材料分离性能等可以预见, 该材料在实际染料废水处理中体现了良好的应用潜力.     

Surface modification of highly dispersed rubber fillers and pigments by titanate proadhesive and hydrophobic compounds

A method of modifying silicate and carbonate fillers with titanate coupling agents and proadhesive agents was worked out. The modification aimed at hydrophobization of filler surface by introduction to the surface of functional groups with chemical affinity to polymers. Optimum amounts of modifying substances and appropriate conditions for performing the modification process were established. The obtained fillers showed a high degree of hydrophobicity.The modified fillers were applied in rubber mixtures based on butadienestyrene or natural rubber, in polyurethanes, in PVC, and as pigments in oil dyes of high corossive resistance.     

Superabsorbent hydrogel composites

A new cost‐effective approach to enhance gel strength of superabsorbent hydrogels was invented. Superabsorbent hydrogel composites (SHCs) were prepared through an optimized rapid solution polymerization of concentrated partially neutralized acrylic acid in the presence of a crosslinking agent under normal atmospheric conditions. Kaolin was used as an inorganic component in the polymerization process to strengthen the hydrogel products. FT‐IR spectroscopy was used to confirm grafting of acrylic chains on to the surface of kaolin particles. Morphology of the products was studied by scanning electron microscopy (SEM). Compared with the kaolin‐free hydrogel (control), kaolin caused a reduced equilibrium swelling and swelling rate as low as 17–31% and 19–29%, respectively. Kaolin, however, resulted in enhanced gel strength as high as 21–35% compared to the control. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to study thermal properties of the composites. The SHCs exhibited higher thermal stability than the control. Meanwhile, changes in certain thermal transitions reconfirmed the chemical interaction of the acrylic chain with kaolin. These thermostabilized strengthened superabsorbent hydrogels may be considered as good candidates for agricultural application to retain more water under soil pressure. Copyright © 2003 John Wiley & Sons, Ltd.