Synthesis of poly(isopropenylphenoxy propylene carbonate) and its facile side‐chain functionalization into hydroxy‐polyurethanes

4‐Isopropenyl phenol ( 4‐IPP ) is a versatile dual functional intermediate that can be prepared readily from bisphenol‐A ( BPA ). Through etherification with epichlorohydrin to the phenolic group of 4‐IPP , it can be converted into 4‐isopropenyl phenyl glycidyl ether ( IPGE ). On further reaction with carbon dioxide in the presence of tetra‐n‐butyl ammonium bromide ( TBAB ) as the catalyst, IPGE was transformed into 4‐isopropenylphenoxy propylene carbonate ( IPPC ) in 90% yield. Cationic polymerization of IPPC with strong acid such as trifluoromethanesulfonic acid or boron trifluoride diethyl etherate as the catalyst at ?40 °C gave a linear poly(isopropenylphenoxy propylene carbonate), poly( IPPC ), with multicyclic carbonate groups substituted uniformly at the side‐chains of the polymer. The cyclic carbonate groups of poly( IPPC ) were further reacted with different aliphatic amines and diamines resulting in formation of polymers with hydroxy‐polyurethane on side‐chains. Syntheses, characterizations of poly( IPPC ) and its conversion into hydroxy‐polyurethane crosslinked polymers were presented. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 802–808     

新型7-O-(芳基氨基甲酸酯)-布雷菲德菌素A的合成及其抗肿瘤活性

芳胺与三光气反应制得芳基异氰酸酯(2a~2n);2a~2n分别对布雷菲德菌素A(3)的7-羟基进行结构修饰,合成了14个新型布雷菲德菌素A氨基甲酸酯类衍生物——7-O-(芳基氨基甲酸酯)-布雷菲德菌素A(4a~4n),其结构经1H NMR,13C NMR和ESI-HR-MS表征。初步的抗肿瘤活性测定结果表明,4i~4k均丧失抑制食管癌细胞株TE-1活性。分子对接研究揭示,引入3后,4的分子空间位阻增大,导致不能与靶位结合,致使抗肿瘤活性丧失。     

Synthesis,electrolyte properties and solar cell performance of hyperbranched poly(aryl-ether-urea)s

Hyperbranched poly(aryl-ether-urea)s with phenyl, N,N-dimethylamino ethyl and polyethylene oxide end-groups linked through urethane group – HBPEU-1, HBPEU-2 and HBPEU-3 respectively – were synthesized from an AB₂-type blocked isocyanate monomer and characterized by FT-IR, ¹H-NMR, SEC-MALLS, TGA and DSC techniques. The molecular weight of the polymers were found to be ranged from 4.9 × 10³ ? 1.96 × 10⁴ g/mol. The TGA results showed that the polymers decompose between 175°C – 220°C. In the DSC curves, HBPEU-1 and HBPEU-3 showed T_g at 160°C and 53°C respectively, whereas HBPEU-2 did not showed clear T_g. All the three polymers were converted into polymer electrolytes by doping with LiI/I₂. The doped polymers showed remarkably high ionic conductivity, up to 222 – 277 times compared to the un-doped polymers and the highest conductivity was observed with doped HBPEU-2. The TiO₂ based dye-sensitized solar cells (DSSCs) were fabricated using the doped polymer electrolytes and their performance was tested; HBPEU-2 showed good performance by yielding energy conversion efficiency (η) of 4.5%.     

Isocyanate‐Free,UV‐Crosslinked Poly(Hydroxyurethane) Networks: A Sustainable Approach toward Highly Functional Antibacterial Gels

An increased sustainabile awarness has inspired the development of new polymeric networks in a remarkable way and this strive should be combined with environmentally concerned end‐uses. Therefore, a UV‐crosslinked polyhydroxyurethane film with antibacterial properties is developed. First, a hydroxyurethane precursor is synthesized using aminolysis condensation, circumventing the use of isocyanates. The films are subsequently crosslinked under solvent‐free conditions through a UV‐triggered thiol‐ene mechanism. The reactions are monitored by ¹H nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy, and the networks have gel contents above 90%, and are transparent, hydrophilic, and highly flexible. Antibacterial properties are achieved by a controlled quaternization of the network's tertiary‐amine and methylation of thiol‐ether functionality, resulting in quaternary ammonium compounds (QACs) and sulfonium compounds. The antibacterial properties are evaluated against both Escherichia coli and Staphylococcus aureus using the agar plate diffusion and tube shaking methods. The QAC‐loaded films exhibit outstanding bactericide properties (>99.9%) and the antibacterial mechanism is demonstrated to be a dual killing mechanism, i.e., diffusion killing and contact active killing.     

Mechanistic aspects on molecular structure formation of polymeric networks from diisocyanates with amidine compounds

Polymeric networks are produced by step‐growth polyaddition and co‐polyaddition reactions of 1‐ethylimidazoline in combination with various diisocyanates. Five aromatic, two aliphatic diisocyanates and a polyurethane prepolymer are used as particular reactant in N,N‐dimethylformamide as solvent at room temperature. Obviously, 1‐ethylimidazoline can serve as trifunctional monomer, which enables a crosslinking reaction with diisocyanates. Molecular structure elements of the polymeric networks were studied by solid state 13C‐NMR spectroscopy revealing that detailed molecular structure formations are determined whether aromatic or aliphatic diisocyanates are used. Quantum chemical calculations were used as supporting method to elucidate the complex reaction cascades. Hence, it can be shown that beside 3:1 stoichiometric structures 2:1 based structures are formed as well. These structures are observed as kinetically controlled products only when aromatic diisocyanate monomers are used. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 977–985     

Polyurea microcapsules from isocyanatoethyl methacrylate copolymers

The synthesis of two types of isocyanate side chain containing copolymers, poly(methyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(MMA‐co‐IEM)) and poly(benzyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(BnMA‐co‐IEM)), which were synthesized by Cu(0)‐mediated radical polymerization, is reported. Polymerization proceeded to high conversion giving polymers of relatively narrow molar mass distributions. The incorporation of the bulky aromatic groups in the latter copolymer rendered it sufficiently stable toward hydrolysis and enabled the isolation of the product and its characterization by ¹H and ¹³C NMR, and FTIR spectroscopy and SEC. Both P(MMA‐co‐IEM) and P(BnMA‐co‐IEM) were functionalized with dibutylamine, octylamine, and (R)‐(+)‐α‐methylbenzyl‐amine, which further proved the successful incorporation of the isocyanate groups. Furthermore, P(BnMA‐co‐IEM) was used for the fabrication of liquid core microcapsules via oil‐in‐water interfacial polymerization with diethylenetriamine as crosslinker. The particles obtained were in the size range of 10–90 µm in diameter independent of the composition of copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2698–2705     

Total synthesis of (+)-valienamine and (−)-1-epi-valienamine via a highly diastereoselective allylic amination of cyclic polybenzyl ether using chlorosulfonyl isocyanate

The total synthesis of (+)-valienamine and (−)-1-epi-valienamine was concisely accomplished from readily available d-glucose via a highly diastereoselective amination of chiral benzylic ether using chlorosulfonyl isocyanate, intramolecular olefin metathesis, and diastereoselective reduction of cyclic enone using l-Selectride as the key steps.     

Evaluation of hydrophobic‐interaction chromatography resins for purification of antibody‐drug conjugates using a mimetic model with adjustable hydrophobicity

Antibody drug conjugates are cytotoxic pharmaceuticals, designed to destroy malignant cells. A cytotoxic molecule is attached to an antibody that binds specific to a cancer‐cell surface. Given the high toxicity of the drugs, strict safety standards have to be kept. For this reason, an antibody drug conjugates model was developed with fluorescein 5‐isothiocyanate as the nontoxic payload surrogate. Due to the similar hydrophobicity, this model is used to establish a suitable purification process and characterization method for antibody drug conjugates. Because of the pH dependent solubility of fluorescein, the hydrophobicity of conjugates can be modulated by the pH value. Based on the complex heterogeneity and hydrophobicity of the conjugates a chromatographic purification is challenging. Hydrophobic interaction chromatography is used for analytical as well as for preparative separation. Because of the increased hydrophobicity of the conjugates compared to native antibody, hydrophobic interaction chromatography often suffer from resolution and recovery problems. Conjugates were separated differing on the number of payloads attached to the antibody. For this matter, the drug–antibody ratio is determined and used as a quantitative term. The conjugates are purified at high recoveries and resolution by step gradients using suitable resins, allowing the separation of the target drug–antibody ratio.     

Spectroscopic Properties,Conformation and Structure of Difluorothiophosphoryl Isocyanate in the Gaseous and Solid Phase

Difluorothiophosphoryl isocyanate, F₂P(S)NCO was characterized with UV/vis, NMR, IR (gas and Ar-matrix), and Raman (liquid) spectroscopy. Its molecular structure was also established by means of gas electron diffraction (GED) and single crystal X-ray diffraction (XRD) in the gas phase and solid state, respectively. The analysis of the spectroscopic data and molecular structures is complemented by extensive quantum-chemical calculations. Theoretically, the C_s symmetric syn-conformer is predicted to be the most stable conformation. Rotation about the P−N bond requires about 9 kJ mol⁻¹ and the predicted existence of an anti-conformer is dependent on the quantum-chemical method used. This syn-orientation of the isocyanate group is the only one found in the gas phase and contained likewise in the crystal. The overall molecular structure is very similar in gas and solid, despite in the solid state the molecules arrange through intramolecular O⋅⋅⋅F contacts into layers, which are further interconnected by S⋅⋅⋅N, S⋅⋅⋅C and C⋅⋅⋅F contacts. Additionally, the photodecomposition of F₂P(S)NCO to form CO, F₂P(S)N, and F₂PNCO is observed in the solid Ar-matrix.