基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

On the effect of fractional statistics on quantum ion acoustic waves

In this paper, I study the effect of a small deviation from the Fermi–Dirac statistics on the quantum ion acoustic waves. For this purpose, a quantum hydrodynamic model is developed based on the Polychronakos statistics, which allows for a smooth interpolation between the Fermi and Bose limits, passing through the case of classical particles. The model includes the effect of pressure as well as quantum diffraction effects through the Bohm potential. The equation of state for electrons obeying fractional statistics is obtained and the effect of fractional statistics on the kinetic energy and the coupling parameter is analyzed. Through the model, the effect of fractional statistics on the quantum ion acoustic waves is highlighted, exploring both linear and weakly nonlinear regimes. It is found that fractional statistics enhance the amplitude and diminish the width of the quantum ion acoustic waves. Furthermore, it is shown that a small deviation from the Fermi–Dirac statistics can modify the type structures, from bright to dark soliton. All known results of fully degenerate and non-degenerate cases are reproduced in the proper limits.     

Removal of Radionuclides from Fukushima Daiichi Waste Effluents

This paper describes the processes used at the Fukushima Daiichi plant, Japan, to purify the waste effluents generated in the cooling of damaged reactors. These include primary cesium removal with the Kurion zeolite system and the SARRY system utilizing silicotitanate to remove radiocesium from water recirculated to reactors for cooling. Another process is the ALPS system to purify the retentates of the reverse osmosis plant to further purify the water from radionuclides after primary cesium separation. In ALPS, a major role is played by the transition metal hexacyanoferrate product CsTreat and sodium titanate SrTreat in the removal of radiocesium and radiostrontium, respectively. The performance of these four exchangers (zeolite, silicotitanate, hexacyanoferrate, and sodium titanate) is critically analyzed with respect to processing capacities and the decontamination factors obtained in the processes. Furthermore, general information on preparation, structure and ion exchange of these ion-exchanger categories is given with additional information on their use in nuclear waste effluent treatment processes. Finally, the importance of selectivity and associated factors are discussed.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Synthesis of novel racemic 3,4-dihydroferroceno[c]pyridines via the Ritter reaction

A new approach for the synthesis of functionalized racemic 3,4-dihydroferroceno[c]pyridines via the Ritter reaction of 2-methyl-1-ferrocenylpropan-1-ol with nitriles in the presence of methansulfonic acid was developed. The scope and limitations of the reaction were evaluated. Selected racemic 3,4-dihydroferroceno[c]pyridines were successfully separated by preparative HPLC on a Chiralcel OD-H column. The absolute configuration of the enantiomers was determined by X-ray crystal structure analysis.     

A Novel Niobium Cluster Aqua Ion with Capping μ4‐Se Ligand

The aqueous solution chemistry of niobium is underexplored, and well characterized aqua complexes are scarce. In this contribution, a new niobium aqua complex was obtained by treatment of Zn‐reduced ethanolic solution of NbCl₅ with HCl in the presence of a selenide source (ZnSe). This is the first example of selenium containing aqua complex of niobium. The yellow‐green aqua complex was isolated by cation‐exchange chromatography and transformed into corresponding isothiocyanate complex by ligand exchange, which was crystallized as (PyH)_4.5[H_1.5Nb₄SeO₅(NCS)₁₀] · 0.5H₂O. X‐ray structural analysis revealed a metal‐metal bonded tetranuclear {Nb₄(μ₄‐Se)(μ₂‐O)₅}⁴⁺ core with a capping μ₄‐Se ligand.     

Tailoring MoS2 Ultrathin Sheets Anchored on Graphene Flexible Supports for Superstable Lithium‐Ion Battery Anodes

2D MoS₂ has a significant capacity decay due to the stack of layers during the charge/discharge process, which has seriously restricted its practical application in lithium‐ion batteries. Herein, a simple preform‐in situ process to fabricate vertically grown MoS₂ nanosheets with 8–12 layers anchored on reduced graphene oxide (rGO) flexible supports is presented. As an anode in MoS₂/rGO//Li half‐cell, the MoS₂/rGO electrode shows a high initial coulomb efficiency (84.1%) and excellent capacity retention (84.7% after 100 cycles) at a current density of 100 mA g^?1. Moreover, the MoS₂/rGO electrode keeps capacity as high as 786 mAh g^?1 after 1000 cycles with minimum degradation of 54 µAh g^?1 cycle^?1 after being further tested at a high current density of 1000 mA g^?1. When evaluated in a MoS₂/rGO//LiCoO₂ full‐cell, it delivers an initial charge capacity of 153 mAh g^?1 at a current density of 100 mA g^?1 and achieves an energy density of 208 Wh kg^?1 under the power density of 220 W kg^?1.     

A hydrophobic deep eutectic solvent‐based vortex‐assisted dispersive liquid–liquid microextraction combined with HPLC for the determination of nitrite in water and biological samples

In recent years, hydrophobic deep eutectic solvents as new generation of green solvents have attracted wide attention in liquid microextraction technique. In this article, four hydrophobic deep eutectic solvents composed of trioctylmethylammonium chloride and oleic acid were designed and prepared firstly. Combined with high‐performance liquid chromatography, these deep eutectic solvents were used as an extraction solvent in vortex‐assisted dispersive liquid–liquid microextraction for the selective enrichment and indirect determination of trace nitrite from real water and biological samples. This method is based on the diazotization‐coupling reaction of nitrite with p‐nitroaniline and diphenylamine in acidic water, and then the nitrite is quantified indirectly by measuring the obtained azo compounds. Some factors influencing the extraction efficiency, including the reaction and extraction conditions, were investigated. Under the optimized conditions, the method has a linear range of 1–300 μg/L with a correlation coefficient of 0.9924, limit of detection of 0.2 μg/L, limit of quantitation of 1 μg/L, intraday and interday relative standard deviations of 4.0 and 6.0%. This method was successfully applied in determination of nitrite from three environmental water and two biological samples with the recovery in the range of 90.5–115.2%. In addition, these results were well agreement with those obtained by the conventional Griess method.     

Rapid separation of post‐blast explosive residues on glass electrophoresis microchips

This study describes the development of an analytical methodology based on the use of microchip electrophoresis (ME) devices integrated with capacitively coupled contactless conductivity detection (C⁴D) for the separation and detection of inorganic anions in post‐blast explosive residues. The best separation condition was achieved using a running buffer composed of 35 mmol/L lactic acid, 10 mmol/L histidine and 0.070 mmol/L cetyl(trimethyl ammonium) bromide. For C⁴D measurements, the highest sensitivity was obtained applying a 700 kHz sinusoidal wave with excitation voltage of 20 V_pp. The separation of Cl^?, NO₃^?, NO₂^?, SO₄^2?, ClO₄^? and ClO₃^? was performed within ca. 150 s with baseline resolution and efficiencies between 4.4 × 10⁴ and 1.7 × 10⁵ plates/m. The found limits of detection ranged between 2.5 and 9.5 μmol/L. Last, real samples of post‐blast explosive residues were analyzed on the ME‐C⁴D devices obtaining successfully the determination of Cl^?, NO₃^? and SO₄^2?. The achieved concentration values varied between 12.8–72.5 mg/L for Cl^?, 1.7–293.1 mg/L for NO₃^? and 1.3–201.3 mg/L for SO₄^2?. The data obtained using ME‐C⁴D devices were in good agreement with the concentrations found by ion chromatography. The approach reported herein has provided short analysis time, instrumental simplicity, good analytical performance and low cost. Furthermore, the ME‐C⁴D devices emerge as a powerful and portable analytical platform for on‐site analysis demonstrating to be a promising tool for the crime scene investigation.     

Simultaneous determination of levofloxacin and ciprofloxacin in human urine by ionic‐liquid‐based,dual‐template molecularly imprinted coated graphene oxide monolithic solid‐phase extraction

A novel method was developed to simultaneously determine the ciprofloxacin and levofloxacin levels in human urine using an ionic‐liquid‐based, dual‐molecularly imprinted polymer‐coated graphene oxide solid‐phase extraction monolithic column coupled with high‐performance liquid chromatography. The molecularly imprinted monolithic column was prepared using ciprofloxacin and levofloxacin as templates, 1‐vinyl‐3‐ethylimidazolium bromide as the functional monomer, and graphene oxide as the core material. The resulting imprinted monoliths were characterized by scanning electron microscopy and fourier transform‐infrared spectroscopy. The efficiency and capacity of the ionic‐liquid‐based imprinted monolithic column were investigated by varying the synthesis conditions (ciprofloxacin/levofloxacin ratio and template/functional monomer/cross‐linker ratio). The solid‐phase extraction process was optimized by changing the washing and eluting conditions. The results suggested that the proposed ionic‐liquid‐based molecularly imprinted solid‐phase extraction monolithic‐high‐performance liquid chromatography method could separate ciprofloxacin and levofloxacin efficiently and simultaneously from human urine. The mean recoveries of ciprofloxacin and levofloxacin ranged from 89.2 to 93.8 and 86.7 to 94.6%, respectively. The intra‐ and interday relative standard deviation ranged from 0.9 to 3.2 and 0.8 to 2.9%, respectively. Under the optimized conditions, the recoveries of ciprofloxacin and levofloxacin were more than 93.8%.