核壳Fenton催化剂CuFe_2O_4@PDA-Cu的制备、表征及其活化H_2O_2降解染料的性能

为得到新型高效多相催化剂,有效去除废水中的染料,以Cu(Ac)_2与CuFe_2O_4@PDA为原料制备了催化剂CuFe_2O_4@PDA-Cu.通过IR、XRD、XPS、UV-Vis、DRS技术对催化剂的性能进行了表征,考察了温度、H_2O_2用量、催化剂用量、pH值、盐等对催化活性的影响.利用HPLC测定降解产物,采用自由基捕获和抑制实验进行机理验证,发现催化剂是核壳结构.温度升高、pH值升高、H_2O_2和催化剂用量的增加均有利于提高催化活性;氯化物、硫酸盐、硝酸盐和磷酸盐不影响催化效果,溴化物和亚硝酸盐降低了催化效果.得到的最优降解条件为:T=30℃,催化剂用量10mg·L~(-1),pH=9,过氧化氢用量10mmol·L~(-1),染料浓度30mg·L~(-1).最优条件下催化剂可循环使用4次以上;甲基橙、茜素红和罗丹明B的去除率为100%;染料R0213、O0118和B0115的去除率大于60%.降解产物有草酸、马来酸和CO_2.甲基橙、茜素红和罗丹明B降解后COD_(Mn)=2~4mg·L~(-1).水杨酸捕获·OH生成2.5-二羟基苯甲酸,叔丁醇抑制染料降解.结果表明,催化剂可活化H_2O_2产生·OH,·OH攻击染料分子开环降解直至矿化.该研究为开发高效多相催化剂,有效去除废水中的染料提供了科学依据.     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Congmujingnosides B-G,triterpene saponins from the stem of Aralia chinensis and their protective effects against H2O2-induced myocardial cell injury

Phytochemical investigation of the stem of Aralia chinensis yielded six new oleanane-type triterpene saponins named as congmujingnosides B-G (1–6). The new ones were elucidated on the basis of the chemical and spectroscopic analysis. Protective effects of compounds 1?6 were tested against H₂O₂-induced H9c2 cardiomyocyte injury, and the data showed that compounds 1 and 5 had significant cell-protective effects. No significant DPPH radical scavenging activity was observed for compounds 1?6.     

On the reactions of methyl radicals with nitrilotris(methylenephosphonic-acid) complexes in aqueous solutions

Abstract

The reactions of methyl radicals with M^II-(ntp)(H₂O)₂ complexes were studied. The formation of an unstable intermediate (ntp)(H₂O)M^III-CH₃ is observed. This reaction is an equilibrium process, i.e. the M^III-C bond decomposes via homolysis. The (ntp)(H₂O)M^III-CH₃ complexes isomerize to a more stable form. The results compared to those obtained in analogous reactions of the M^II-(nta)(H₂O)₂ complexes were shown to be similar with one exception – for the nta complexes no isomerization process is observed.     

Synthesis of Cyclic Compounds via Photoinduced Radical Cyclization Cascade of C=C bonds

Cyclic compounds constitute a great important class of substances in the science of medicine and biology, which renders the research on facile and efficient construction of such complex scaffolds from simple starting materials to be hot and appealing. Recently, the radical cascade reaction involving multiple bond formation/cleavage has emerged as an ideal and powerful route to give high‐value cyclic products, along with diminished cost and waste. As a simple and benign methodology, photoredox catalysis offers a readily available access to the generation of radical species. Alkenes have been recognized as one of the most valuable building blocks for the reason they allow installation of different functional groups simultaneously through addition to the C=C bonds. This account summarizes the recent advances in photoinduced radical cascade cyclization to the synthesis of cyclic compounds with C=C bonds working as the initial radical acceptors, and emphasis is put on the related reaction mechanisms.     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Ultra‐Fast Synthesis of Multivalent Radical Nanoparticles by Ring‐Opening Metathesis Polymerization‐Induced Self‐Assembly

We report the straightforward, time‐efficient synthesis of radical core–shell nanoparticles (NPs) by polymerization‐induced self‐assembly. A nitroxide‐containing hydrophilic macromolecular precursor was prepared by ring‐opening metathesis copolymerization of norbornenyl derivatives of TEMPO and oligoethylene glycol and was chain‐extended in situ with norbornene in ethanolic solution, leading to simultaneous amphiphilic block copolymer formation and self‐assembly. Without any intermediate purification from the monomers to the block copolymers, radical NPs with tunable diameters ranging from 10 to 110 nm are obtained within minutes at room temperature. The high activity of the radical NPs as chemoselective and homogeneous, yet readily recyclable catalysts is demonstrated through oxidation of a variety of alcohols and recovery by simple centrifugation. Furthermore, the NPs show biocompatibility and antioxidant activity in vitro.     

Alkylation of Allyl/Alkenyl Sulfones by Deoxygenation of Alkoxyl Radicals

A challenging deoxygenation of alkoxyl radicals from readily accessible alcohol derivatives was developed, affording facile synthesis of functionalized alkenes with good functional group tolerance under mild reaction conditions. Because alkoxyl radicals can easily undergo β-fragmentations or hydrogen abstractions, this new strategy for deoxygenation of alkoxyl radicals is highly valuable. Moreover, mechanistic studies revealed that the electron-neutral phosphine acts as the deoxygenation reagent.