自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

晶面可控BiOCl光催化剂的制备及其催化反应活性研究

以五水合硝酸铋和氯化钾为原料,通过水热法合成了BiOCl光催化剂,并对其结构进行表征,考察了前驱体的pH对催化剂结构和降解8-羟基喹啉活性的影响。结果表明,随前驱体pH的增加,催化剂[001]晶面暴露程度下降,带隙能减小,且催化反应活性降低,这可归因于低的带隙能和高的光生载流子复合效率。进一步考察降解体系pH对催化剂反应活性的影响,结果表明,降解体系pH影响8-羟基喹啉在催化剂表面的吸附行为,进而影响催化剂的反应活性。     

Redox‐responsive Fluorescent Nanoparticles Based on Diselenide‐containing AIEgens for Cell Imaging and Selective Cancer Therapy

A fluorescent, diselenide‐containing 9,10‐distyrylanthracene (DSA) derivative (SeDSA) with aggregation‐induced emission (AIE) characteristic was successfully synthesized and SeDSA nanoparticles (NPs) were prepared through a nanoprecipitation method. SeDSA could coassemble with an antitumor prodrug, diselenide‐containing paclitaxel (SePTX), which could be obtained by precipitation, to form SeDSA‐SePTX Co‐NPs (Co‐NPs). Molecular dynamics (MD) simulations reveal that the driving forces for the self‐assembly behaviors of SeDSA NPs and SePTX NPs are π–π interactions and hydrophobic interactions, respectively, while the driving forces for Co‐NPs include hydrophobic interactions between SeDSA and SePTX, π–π interactions between SeDSA molecules and hydrophobic interactions between SePTX molecules. Meanwhile, Se‐Se bonds play a crucial role in balancing the intramolecular forces. These diselenide‐containing nanoparticles (SeDSA NPs, SePTX NPs and Co‐NPs) exhibit a high stability under physiological conditions and excellent reduction‐sensitivity in the presence of the redox agent glutathione (GSH) because of the selenium‐sulfur exchange reaction between diselenide and GSH. Both SeDSA NPs and Co‐NPs show strong orange fluorescence emissions on the account of the AIE feature of SeDSA and they were easily internalized by HeLa and HepG2 cells. Distinctively, the Co‐NPs combine the advantage of SeDSA and SePTX for cell imaging and antineoplastic activity, and exhibit selectivity of cytotoxicities between neoplasia cells and normal cells. This study highlights the development of diselenide‐containing AIEgens as a unique approach to prepare uniform and stable fluorescent nanoparticles for the application in cell imaging and tumor treatment.     

Reversible Shape‐Morphing and Fluorescence‐Switching in Supramolecular Nanomaterials Consisting of Amphiphilic Cyanostilbene and Cucurbit[7]uril

We demonstrate a reversible shape‐morphing with concurrent fluorescence switching in the nanomaterials which are complexed with cucurbit[7]uril (CB[7]) in water. The cyanostilbene derivative alone forms ribbon‐like two‐dimensional (2D) nanocrystals with bright yellow excimeric emission in water (λ_em=540 nm, Φ_F=42 %). Upon CB[7] addition, however, the ribbon‐like 2D nanocrystals immediately transform to spherical nanoparticles with significant fluorescence quenching and blue‐shifting (λ_em=490 nm, Φ_F=1 %) through the supramolecular complexation of the cyanostilbene and CB[7]. Based on this reversible fluorescence switching and shape morphing, we could demonstrate a novel strategy of turn‐on fluorescence sensing of spermine and also monitoring of lysine decarboxylase activity.     

Positively Charged Nanoaggregates Based on Zwitterionic Pillar[5]arene that Combat Planktonic Bacteria and Disrupt Biofilms

Bacterial biofilms are difficult to eradicate because they are less susceptible to antibiotics and more easily develop resistance. Therefore, there is an urgent need for new materials that can combat planktonic bacteria and disrupt established biofilms. To tackle this challenge, we design a multifunctional zwitterionic pillar[5]arene, which can self‐assemble into weakly positively charged nanoaggregates that exhibit antibacterial activity against Gram‐negative Escherichia coli (DH5α) and Gram‐positive Staphylococcus aureus (SH1000) bacterial strains in solution. In addition, the zwitterionic pillar[5]arene can efficiently disrupt pre‐existing Escherichia coli (DH5α) biofilms and kill the biofilm‐enclosed bacteria without rapid generation of resistance.     

刺激响应型肽自组装及其应用

肽自组装体由于具有结构稳定、易调控、生物相容性好、可生物降解等优点,在构筑新型材料及生物医药领域表现出了巨大潜力。本文介绍了肽自组装的概念、机理和应用,详细归纳了刺激响应型肽自组装的研究进展;按照刺激源的不同将刺激响应型肽自组装分为pH响应型肽自组装、温度响应型肽自组装、溶剂响应型肽自组装、光响应型肽自组装、超声波响应型肽自组装以及离子响应型肽自组装;列举了肽自组装在药物控释、脊髓损伤修复、仿酶催化、生物模板等领域的应用。最后,基于目前肽自组装存在的一些问题(如影响肽自组装结构的外界因素不易精准把控、自组装的研究与生命科学领域的交叉程度低等)对肽自组装的发展做了展望。     

3D Starfish-Like FeOF on Graphene Sheets: Engineered Synthesis and Lithium Storage Performance

To address the problems associated with poor conductivity and large volume variation in practical applications as a conversion cathode, engineering of hierarchical nanostructured FeOF coupled with conductive decoration is highly desired, yet rarely reported. Herein, 3D starfish-like FeOF on reduced graphene oxide sheets (FeOF/rGO) is successfully prepared, for the first time, through a combination of solvothermal reaction, self-assembly, and thermal reduction. Integrating the structural features of the 3D hierarchical nanostructure, which favorably shorten the path for electron/ion transport and alleviate volumetric changes, with those of graphene wrapping, which can further enhance the electrical conductivity and maintain the structural stability of the electrode, the as-prepared FeOF/rGO composite exhibits a superior lithium-storage performance, including a high reversible capacity (424.5 mA h⁻¹ g⁻¹ at 50 mA g⁻¹), excellent stability (0.016 % capacity decay per cycle during 180 cycles), and remarkable rate capability (275.8 mA h⁻¹ g⁻¹ at 2000 mA g⁻¹).     

A kinetics study of ligand substitution reaction on dinuclear platinum complexes: Stochastic versus deterministic approach

The kinetics on a basic ligand substitution reaction on dinuclear platinum complexes [Pt(PEt₃)₂PhPt(PEt₃)₂]²⁺ and [Pt(PEt₃)₂PhCOPhPt(PEt₃)₂]²⁺ , with the ligands pyridine and 3-chloropyridine, is studied. This is a fundamental step in a self-assembly, and the time evolution has been observed with a new experimental technique, QASAP (quantitative analysis of self-assembly process), which is recently developed by Hiraoka's group. As a result of numerical calculations based on master equation, we succeed in specifying the reaction rate constants with a simple reaction model. In addition, the time evolutions of all the intermediate components produced and consumed in chemical reaction are revealed, including those unobserved in the experiments. The convergence behavior of the existence ratios of specific chemical species calculated with the stochastic algorithm method is compared with those obtained from deterministic formalism based on rate equations, revealing a clear dependence on the number of constituent molecules. © 2018 Wiley Periodicals, Inc.     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.