Diffusion Model of a Non-Integer Order PIγ Controller with TCP/UDP Streams

In this article, a way to employ the diffusion approximation to model interplay between TCP and UDP flows is presented. In order to control traffic congestion, an environment of IP routers applying AQM (Active Queue Management) algorithms has been introduced. Furthermore, the impact of the fractional controller PIγ and its parameters on the transport protocols is investigated. The controller has been elaborated in accordance with the control theory. The TCP and UDP flows are transmitted simultaneously and are mutually independent. Only the TCP is controlled by the AQM algorithm. Our diffusion model allows a single TCP or UDP flow to start or end at any time, which distinguishes it from those previously described in the literature.     

Evolution of electrical conductivity and semiconductor to metal transition of iron oxides at extreme conditions

Iron oxides are widely found as ores in Earth's crust and are also important constituents of its interiors. Their polymorphism, composition changes, and electronic structures play essential roles in controlling the structure and geodynamic properties of the solid Earth. While all-natural occurring iron oxides are semiconductors or insulators at ambient pressure, they start to metalize under pressure. Here in this work, we review the electronic conductivity and metallization of iron oxides under high-pressure conditions found in Earth's lower mantle. We summarize that the metallization of iron oxides is generally controlled by the pressure-induced bandgap closure near the Fermi level. After metallization, they possess much higher electrical and thermal conductivity, which will facilitate the thermal convection, support a more stable and thicker D^{$\prime\prime$} layer, and formulate Earth's magnetic field, all of which will constrain the large-scale dynamos of the mantle and core.     

新型多孔材料用作色谱手性固定相

手性固定相是色谱法分离分析手性化合物的关键。近年来,随着材料科学的迅速发展,越来越多的新型手性材料被作为色谱固定相用于手性分离分析。本文综述了近5年来液相色谱、气相色谱和毛细管电色谱领域的新型手性固定相的研究进展,重点总结了基于手性多孔材料的新型手性固定相研究,最后对手性固定相的研究进行了总结与展望。     

Ionic liquid-functional MCM-41 as a high effective catalyst for the synthesis of isatylidene malononitrile via Knoevenagel condensation

Ionic liquid functional MCM-41 was synthesized, characterized and used as heterogeneous catalyst for the Knoevenagel condensation of isatins with malononitrile. A series of corresponding isatylidene malononitrile were obtained in high isolated yield (96–99%) at room temperature in a short time. The heterogeneous catalyst can be easily recovered by centrifugation and showed almost no loss of activity over 10 recycle experiments. At the same time, the gram-scale experiments showed excellent yields and provided a highly effective method for scale up applications.     

A novel UPLC–MS/MS method for simultaneous quantification of trigonelline, 4-hydroxyisoleucine,and diosgenin from Trigonella foenum-graecum extract: Application to pharmacokinetic study in healthy and type 2 diabetic rats

Trigonelline (TR), 4-hydroxyisoleucine (4-HI), and diosgenin (DG) are the main bioactives of the purified standardized extract of the popular plant Trigonella foenum-graecum L. (TFG), and it has been proven effective for the treatment of various diseases. However, to the best of our knowledge, no study has investigated the pharmacokinetic parameters of purified standardized T. foenum-graecum extract in normal and diabetic Wistar rats. The present study has developed and validated a rapid, reliable, and sensitive simultaneous ultra-performance liquid chromatography MS method to estimate these bioactives. The chromatographic separation was achieved using methanol, acetonitrile, and 0.1% formic acid with the ideal gradient flow system on a BEH Shield RP 18 column. A positive electrospray ionization mode was selected to estimate m/z values of TR (138.14 > 94.63), 4-HI (148.19 > 74.08), and DG (415.54 > 271.33). The method was robust and reproducible over the linearity range of 60–5000, 6–5000, and 15–5000 ng/mL for TR, 4-HI, and DG, respectively. Using this novel validated method, we investigated the pharmacokinetic parameters of bioactives using Phoenix WinNonlin version 8.0 (Certera) in normal and diabetic rats. The assay was successfully applied for the estimation of pharmacokinetic parameters using noncompartmental analysis. This investigation shows that the absorption rate increased, whereas distribution and elimination processes slowed down in diabetic rats compared with normal rats.     

Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

The impact of insecticides containing deltamethrin and cyfluthrin on the composition of surface compounds in the larvae,females and males of Tenebrio molitor

This paper presents the effect of insecticides on the composition of the surface compounds of one of the most harmful insects, Tenebrio molitor, by analysis using GC–MS. As a result of the use of insecticides, the composition of the chemical compounds on the surface of insects changes, depending on the insecticides used. The most numerous groups of the marked compounds were fatty acids, alkanes, esters and sterols. The content of the identified compounds in the larvae increased at both 24 and 48 h after the application of insecticides, in comparison with the control samples. The content of identified compounds in the samples taken from the females increased 24, 48 and 72 h after the application of insecticides in comparison with the control samples. By contrast, in samples prepared from males, the content of identified compounds decreased 24 h after the application of insecticides, compared with the control samples. The highest content of chemical compounds was for fatty acids and alkanes after the use of insecticides. The content of fatty acids after the application of the insecticide with deltamethrin was 62.1 ± 3.3–466.9 ± 5.9 μg/g, and after the application of the insecticide with cyfluthrin was 49.9 ± 1.9–458.3 ± 4.2 μg/g. However, the content of alkanes after the use of deltamethrin was 115.6 ± 4.2–4672.0 ± 32.1 μg/g, and after the use of cyfluthrin was 189.4 ± 3.8–3975.0 ± 10.2 μg/g.     

Novel synthesis of sensor for selective detection of Fe+3 ions under various solvents

Naked-eye colored chemo dosimeter based on vanilline based conjugated sensor was synthesized and characterized. The main point of this paper is that the solvent also affects on selectivity of metals. Vanilline based conjugate sensor exhibited high selectivity and sensitivity for detection of Ferric ions (Fe⁺³) in all (both polar and nonpolar) solvents according to absorbance which can be observed by naked eye. The selectivity was more prominent in nonpolar or less polar solvent due to solubility factor of ions and sensor but not for polar. The detection of limit of the synthesized probes was shown up to 0.84 ppm. The dielectric constant of solvents affected on the complex formation of ligand with transition metal ions. A filter paper strip system was used for rapid monitoring of detection by color variation.     

Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.