N‐bromo‐hydantoin grafted polystyrene beads: Synthesis and nano‐micro beads characteristics for achieving controlled release of active oxidative bromine and extended microbial inactivation efficiency

N‐bromo‐hydantoin and N‐bromo‐5,5′‐dimethylhydantoin conjugated polystyrene beads were synthesized from chloromethyl polystyrene beads which differ in their particles size, crosslinking, nano‐micro porosity, and tunnels size on the surface, in order to study the effect of these parameters on oxidative halogen release and resultant activity, for water purification applications. The synthesized beads were characterized using elemental analysis, FT‐IR, solid state ¹³C‐NMR, and scanning electron microscope (SEM). The conjugation yield and kinetics in different solvents and bromine loading capacity were studied. The N‐bromoamine polystyrene beads were tested for water decontamination according to NSF 231 protocol. The release of active bromine was analyzed by spectrophotometer using a DPD‐1 kit and also studied the antimicrobial activity against Escherichia coli and MS2 phages. Bead's nano‐micro characteristics were found critical for oxidative halogen release control: rate stabilization and modulation, extension and also influences antimicrobial activity. The synthesized beads exhibited extended and stable release of bromine, 6 and 4 log reduction for E. coli and MS2, respectively for 250 L of passing contaminated water. Thus, N‐halamine hydantoins conjugated polystyrenes, chemically or kinetically release modified should have applications as disinfectants in water purification systems as well as medical field. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 596–610     

Identification strategies for flame retardants employing time‐of‐flight mass spectrometric detectors along with spectral and spectra‐less databases

In the past, the preferred strategy for the identification of unknown compounds was to search in an appropriate mass spectral database for spectra obtained using either electron ionisation (GC‐MS analyses) or collision‐induced dissociation (LC‐MS/MS analyses). Recently, an increase has been seen in the use of accurate mass instruments and spectra‐less databases, based on monoisotopic accurate mass alone. In this article, we describe a systematic workflow for the screening and identification of new flame retardants. This approach utilises LC‐quadrupole‐time‐of‐flight MS and spectra‐less databases based only on monoisotopic accurate mass for the identification of ‘unknowns’. An in‐house database was built, and the input parameters used in the data analysis process were optimised for flame retardant chemicals, so that it can be easily transferred to other laboratories. The procedure was successfully applied to dust, foam and textiles from car interiors and indoor consumer products. The developed method was demonstrated for the main new flame retardant present in Antiblaze V6 and for the three unreported reaction by‐products/impurities present in the same technical mixture. Copyright © 2015 John Wiley & Sons, Ltd.     

Catalytic asymmetric Henry reaction using copper(II) chiral tridentate Schiff-base complexes and their polymer-supported complexes

A series of chiral tridentate Schiff-base ligands and their polymer-supported ligands were conveniently prepared and introduced as copper(II) chiral complexes for the asymmetric Henry reaction. The structures of these ligands have been characterized by IR, ¹H NMR, ¹³C NMR and MS. The experimental results showed that the corresponding β-nitro alcohols were obtained in moderate to high yields (up to 98%) with up to 98% ee under mild conditions. The complex catalyst forming from copper(II) polymer-supported ligands could be recycled by a simple filtration and reused 6 times at least with similar good catalytic effect (about 94% yield and 90% ee).     

还原-氧化协同降解全/多卤代有机污染物

全/多卤代有机污染物大多具有生态毒性、生物蓄积性、环境持久性及长距离迁移性,不仅危害环境与生态安全,而且可经食物链传递威胁人类健康。由于卤原子是吸电子基团且取代数目多,这类物质的最高占据分子轨道能较低,难于被氧化降解,相反较易被还原法脱卤降解。随卤原子取代数减少,脱卤产物难被进一步还原,而其毒性甚至高于母体污染物。注意到低卤代有机物更容易发生氧化降解,一些研究构建了还原-氧化接力降解体系,即先利用还原法将全/多卤代有机污染物还原为低卤代产物,再利用氧化法降解这些中间产物,从而实现深度/完全脱卤和矿化。本文根据催化反应类型对还原-氧化联用法进行了归纳,分类介绍了基于传统化学催化、光催化、电化学、光电化学及机械化学等构建还原-氧化协同降解体系的原理及应用,以期为开发高效的处置技术提供思路和建议。     

Cooperative Effect of Noncovalent Interactions on Tetrel Bonding in Halogenated Silanes

Tetrel bond, a weak noncovalent interaction between the σ-hole of a Group IV element (silicon in our case) and the cloud of an electronegative element (oxygen in our case) is the focus of this work. The percentage strengthening of tetrel bond has been investigated by optimizing 16 binary complexes of halogenated silane and water of general formula SiX_nH_4−n−H₂O and 16 ternary complexes, of general formula NaX−SiX_nH_4−n−H₂O, where X=F, Cl, Br and I and n=1, 2, 3 and 4 at various levels of theory defined within the formalism of density functional theory (DFT). With the addition of NaX, tetrel bond between Si and O in SiX_nH_4−n−H₂O gets strengthened up to 49 %, owing to cooperativity effect exerted by hydrogen bonding between X and H in the ternary complex NaX−SiX_nH_4−n−H₂O. In the series of complexes studied here, overall stabilization due to cooperativity lies between 10 kJ/mol to 170 kJ/mol. This large extent of reinforcement due to cooperativity has never been showcased before. The exceptional stabilization and reinforcement owe its genesis to the transformation of the ternary complex into a cluster orchestrated by the H-bonding in most of the cases and covalent bonding in few of the cases.     

Magnetically recyclable Schiff-based palladium nanocatalyst [Fe3O4@SiNSB-Pd] and its catalytic applications in Heck reaction

A magnetically separable palladium nanocatalyst has been synthesized through the immobilization of palladium onto 3-aminopropylphenanthroline Schiff based functionalized silica coated superparamagnetic Fe₃O₄ nanoparticles. The nanocatalyst (Fe₃O₄@SiNSB-Pd) was fully characterized using several spectroscopic techniques, such as FT-IR, HR-SEM, TEM, XRD, ICP, and XPS. The microscopic image of Fe₃O₄ showed spherical shape morphology and had an average size of 150 nm. The Pd-nanoparticles exhibited an average size 3.5 ± 0.6 nm. The successful functionalization of Fe₃O₄@SiNSB-Pd was identified by FT-IR spectroscopy and the appearance of palladium species in Fe₃O₄@SiNSB-Pd was confirmed by XRD analysis. While XPS has been utilized for the determination of the chemical oxidation state of palladium species in Fe₃O₄@SiNSB-Pd. Several activated and deactivated arene halides and olefines were employed for Mizoroki-Heck cross-coupling reactions in the presence of Fe₃O₄@SiNSB-Pd, each of which produced the respective cross-coupling products with excellent yields. The Fe₃O₄@SiNSB-Pd shows good reactivity and reusability for up to seven consecutive cycles.     

Dual Gold‐Catalyzed Head‐to‐Tail Coupling of Iodoalkynes

Various haloalkynes are converted in the presence of a dual activation gold catalyst. Via a dual activation process a completely atom economic head‐to‐tail coupling delivers gem‐dihalogenated conjugated enynes as valuable building blocks for organic synthesis.     

On the long‐range relativistic effects in the 15N NMR chemical shifts of halogenated azines

Long‐range β‐ and γ‐relativistic effects of halogens in ¹⁵N NMR chemical shifts of 20 halogenated azines (pyridines, pyrimidines, pyrazines, and 1,3,5‐triazines) are shown to be unessential for fluoro‐, chloro‐, and bromo‐derivatives (1–2 ppm in average). However, for iodocontaining compounds, β‐ and γ‐relativistic effects are important contributors to the accuracy of the ¹⁵N calculation. Taking into account long‐range relativistic effects slightly improves the agreement of calculation with experiment. Thus, mean average errors (MAE) of ¹⁵N NMR chemical shifts of the title compounds calculated at the non‐relativistic and full 4‐component relativistic levels in gas phase are accordingly 7.8 and 5.5 ppm for the range of about 150 ppm. Taking into account solvent effects within the polarizable continuum model scheme marginally improves agreement of computational results with experiment decreasing MAEs from 7.8 to 7.4 ppm and from 5.5 to 5.3 ppm at the non‐relativistic and relativistic levels, respectively. The best result (MAE: 5.3 ppm) is achieved at the 4‐component relativistic level using Keal and Tozer's KT3 functional used in combination with Dyall's relativistic basis set dyall.av3z with taking into account solvent effects within the polarizable continuum solvation model. The long‐range relativistic effects play a major role (of up to dozen of parts per million) in ¹⁵N NMR chemical shifts of halogenated nitrogen‐containing heterocycles, which is especially crucial for iodine derivatives. This effect should apparently be taken into account for practical purposes.     

Development of an Advanced Process for Manufacturing Polyacetal Resin

Abstract

An advanced process for manufacturing polyacetal resin has been developed. First, a new technology for the production of highly concentrated aqueous formaldehyde was developed by oxidizing methylal. Whereas the oxidation of methanol yields 1 mol water per mole formaldehyde, methylal oxidation produces only 1 mol water for every 3 mol formaldehyde. Thus, the output from methylal oxidation is more than 70% formaldehyde, compared with 55% from methanol oxidation. Second, a new extraction distillation process for formaldehyde purification was developed in order to get highly purified formaldehyde directly from formalin. By using highly purified formaldehyde, an end-capped polymer was obtained in the presence of acetic anhydride as a chain transfer or end-capping agent during polymerization. Third, the relatively high formaldehyde concentration enhances the formation of trioxane. Purified trioxane is copolymerized with ethylene oxide in the presence of an end-capping agent to get an end-capped polymer with high thermal stability. Two new intermediates from the initiation reaction of the copolymerization, 1,3,5,7-tetraoxacyclononane (TOCN) and 1,3,5,7,10-pentaoxacyclododecane (POCD), were isolated, and a new initiation mechanism was proposed. Fourth, the world's first acetal block copolymer was commercialized by the polymerization of formaldehyde in the presence of a lubricant functional polymer having an active hydrogen atom. This acetal block copolymer exhibits super lubrication properties.     

Reactivity of Various α-Halo Ketones in One-Pot Synthesis of γ-Iminolactones

The highly reactive 1:1 intermediate generated in the reaction of tert-butyl isocyanide and dialkyl acetylenedicarboxylate is trapped by α-halo ketones to produce halogenated iminolactones as the sole product in good yields.