A Stable Porphyrin Functionalized Graphite Electrode Used at the Oxygen Evolution Reaction Potential

Many researches have been devoted to rechargeable power generators that can store (but also release) energy. This availability is ensured through (e. g.) the oxygen evolution reaction (OER). However, (i) large values of the overpotentials and (ii) a progressive detriment of the anode (graphite) electrode limit the ultimate device. In view of enhancing the electrode performances, graphite was protected by following different strategies, which oblige to follow precise preparation protocols. Here, we prove that a thin layer of free-base porphyrin molecules is able to protect the underneath graphite electrode from detriment even if many (about 100) electrochemical cycles are performed.     

基体石墨的孔隙结构及其对单质Ag扩散的影响

高温气冷堆燃料元件的基体石墨是一种多孔复合材料,是燃料元件的主要组成部分,其结构影响燃料元件的性能和裂变产物在燃料元件中的扩散。 本文利用压汞法表征基体石墨的孔隙结构,并讨论了基体石墨制备工艺中最大压制压强与热处理过程对孔隙结构的影响。 结果表明,基体石墨大孔孔径分布为6001900 nm,高温热处理使基体石墨的总孔隙率、中值孔径、大孔孔容均减小;基体石墨热处理样品的大孔孔容随最大压制压强的增加而呈线性减少,热处理过程单质Ag在石墨基体中的扩散速度与大孔孔容变化具有正相关性。     

Effect of solid lubricant particles on the tribological properties of PTFE composites lubricated with natural seawater

An orthogonal test was used to design different mixture ratios of molybdenum disulfide(MoS₂), graphite, and SiO₂ particles, which were filled with polytetrafluoroethylene (PTFE) composite. MoS₂-, graphite-, and SiO₂-modified PTFE was obtained by pressing and sintering, and the processing parameters were determined using progressive studies and experiments. The friction and wear properties of different PTFE composites lubricated with natural seawater were analyzed using an MMU-5G wear tester. A laser scanning confocal microscope was employed to examine the morphological characteristics of the worn surface. Moreover, the influence of particle proportions on the tribological property of composites was analyzed. Results show that the addition of SiO₂, MoS₂, and graphite can increase the bearing capacity, improve the wear resistance, reduce the friction coefficient, and increase the self-lubricating ability of the PTFE matrix.     

Chemical-Reductant-Free Electrochemical Deuteration Reaction using Deuterium Oxide

We report a method for the electrochemical deuteration of α,β-unsaturated carbonyl compounds under catalyst- and external-reductant-free conditions, with deuteration rates as high as 99 % and yields up to 91 % in 2 h. The use of graphite felt for both the cathode and the anode was key to ensuring chemoselectivity and high deuterium incorporation under neutral conditions without the need for an external reductant. This method has a number of advantages over previously reported deuteration reactions that use stoichiometric metallic reductants. Mechanistic experiments showed that O₂ evolution at the anode not only eliminates the need for an external reductant but also regulates the pH of the reaction mixture, keeping it approximately neutral.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

Influence of the Addition of Nano-porous Graphite/Parafffin Additive on the Wear Properties of Phenol-Formaldehyde Resin Composites

Phenol-formaldehyde resin (PF) composites with a nano-porous graphite additive (NPGA) in various contents were fabricated and the wear behaviors under low and high sliding speeds were studied. The addition of NPGA significantly improved the wear resistance of the PF. The specific wear rates of PF composites under low sliding speed first decreased with increasing NPGA and then slightly increased when the NPGA content surpassed 15?wt%; the specific wear rate of the composite with 15?wt% NPGA was reduced by 77% compared with the neat PF. Under high sliding speed the specific wear rates of the composite material decreased continuously with increasing NPGA content and the maximum wear resistance of the composite with 20?wt% NPGA was more than 12 times that of the neat phenolic resin. The results are attributed to the combined effects of load-capacity and the lubrication role of the included NPGA. The surface morphology of the worn surface was characterized, and the wear mechanism for the composites is discussed.     

基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.     

Reversible M−M Bonding by Alkaline Earth Metals (Mg,Ca, Sr,Ba) in Graphite Intercalation Compounds

The alkaline earth metals (M=Mg, Ca, Sr, and Ba) exhibit a +2 oxidation state in nearly all known stable compounds, but M^I dimeric complexes with M−M bonding, [M₂(en)₂]²⁺, (en=ethylenediamine) of all these metals can be stabilized within the galleries of donor-type graphite intercalation compounds (GICs). These metals can also form GICs with more conventional metal (II) ion complexes, [M(en)₂]²⁺. Here, the facile interconversion between dimeric-M^I and monomeric-M^II intercalates upon the addition/removal of en are reported. Thermogravimetry, powder X-ray diffraction, and pair distribution function analysis of total scattering data support the presence of either [M₂(en)₂]²⁺ or [M(en)₂]²⁺ guests. This phase conversion requires coupling graphene and metal redox centers, with associated reversible M−M bond formation within graphene galleries. This chemistry allows the facile isolation of unusual oxidation states, reveals M⁰→M²⁺ reaction pathways, and present new opportunities in the design of hybrid conversion/intercalation materials for applications such as charge storage.     

An Enzyme‐free H2O2 Sensor Based on Poly(2‐Aminophenylbenzimidazole)/Gold Nanoparticles Coated Pencil Graphite Electrode

A poly(2‐aminophenylbenzimidazole)/gold nanoparticles (P2AB/AuNPs) coated disposable pencil graphite electrode (PGE) was fabricated as an enzyme‐free sensor for the H₂O₂ determination. P2AB/AuNPs and P2AB were successfully synthesized electrochemically on PGE in acetonitrile for the first time. The coatings were characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, Energy‐dispersive X‐ray spectroscopy, Surface‐enhanced Raman spectroscopy, and UV‐Vis spectroscopy. AuNPs interacted with P2AB as carrier enhances the electrocatalytic activity towards reduction of H₂O₂. The analytical performance was evaluated in a 100 mM phosphate buffer solution at pH 6.5 by amperometry. The steady state current vs. H₂O₂ concentration is linear in the range of 0.06 to 100 mM (R²=0.992) with a limit of detection 3.67×10^?5 M at ?0.8 V vs. SCE and no interference is caused by ascorbic acid, dopamine, uric acid, and glucose. The examination for the sensitive determination of H₂O₂ was conducted in commercially available hair oxidant solution. The results demonstrate that P2AB/AuNPs/PGE has potential applications as a sensing material for quantitative determination of H₂O₂.