Cu/CuO-Graphene Foam with Laccase-like Activity for Identification of Phenolic Compounds and Detection of Epinephrine

Although great progress has been made in the advancement of nanozymes, most of the studies focus on mimicking peroxidase, oxidase, and catalase, while relatively few studies are used to mimic laccase. However, the use of nanomaterials to mimic laccase activity will have great potential in environmental and industrial catalysis. Herein, Cu/CuO-graphene foam with laccase-like activity was designed for the identification of phenolic compounds and the detection of epinephrine. In a typical experiment, the formation mechanism of Cu/CuO-graphene foam was investigated during the pyrolysis process by thermogravimetric-mass spectrometry. As a laccase mimic, Cu/CuO-graphene foam exhibited excellent catalytic activity with a Michaelis-Menten constant and a maximum initial velocity of 0.17 mmol/L and 0.012 mmol∙L^-1∙s^-1, respectively. Based on this principle, Cu/CuO-graphene foam nanozyme could differentially catalyze phenolic compounds and 4-aminoantipyrine for simultaneous identification of phenolic compounds. Furthermore, a colorimetric sensing platform was fabricated for the quantitative determination of epinephrine, showing linear responses to epinephrine in the range of 3 mg/mL to 20 mg/mL with the detection limit of 0.2 mg/mL. The proposed Cu/CuO-graphene foam nanozyme could be applied for the identification of phenolic compounds and the detection of epinephrine, showing great potential applications for environmental monitoring, biomedical sensing, and food detection fields.     

Poly(amidoamine) dendrimer‐coated magnetic nanoparticles for the fast purification and selective enrichment of glycopeptides and glycans

Glycosylated proteins modulate various important functions of organisms. To reveal the functions of glycoproteins, in‐depth characterization studies are necessary. Although mass spectrometry is a very efficient tool for glycoproteomic and glycomic studies, efficient sample preparation methods are required prior to analyses. In the study, poly(amidoamine) dendrimer‐coated magnetic nanoparticles were presented for the specific enrichment and fast purification of glycopeptides and glycans. The enrichment and purification performance of the developed method was evaluated both at the glycopeptide, and the glycan level using several standard glycoprotein digests and released glycan samples. The poly(amidoamine) dendrimer‐coated magnetic nanoparticles not only showed selective affinity (Immunoglobulin G/Bovine Serum Albumin, 1/10 by weight) to glycopeptides and released glycans but also good sensitivity (0.4 ng/µL for Immunoglobulin G) for glycoproteomic and glycomic applications. Thirty‐five glycopeptides of Immunoglobulin G were detected after enrichment with poly(amidoamine) dendrimer‐coated magnetic nanoparticles. In addition, 55 ¹⁸O tagged deamidated glycopeptides belonging to human plasma glycoproteome were confirmed. Finally, fifty 2‐aminobenzoic acid, and 30 procainamide‐labelled human plasma N‐glycans released from human plasma glycoproteins were determined after purifications. The results indicate that the proposed enrichment and purification method using poly(amidoamine) dendrimer‐coated magnetic nanoparticles could be simply adjusted to sample preparation methods.     

Modifying the physicochemical properties,solubility and foaming capacity of milk proteins by ultrasound-assisted alkaline pH-shifting treatment

This study investigated the effects of different treatment of alkaline pH-shifting on milk protein concentrate (MPC), micellar casein concentrate (MCC) and whey protein isolate (WPI) assisted by the same ultrasound conditions, including changes in the physicochemical properties, solubility and foaming capacity. The solubility of milk proteins had a significant increase with gradual enhancement of ultrasound-assisted alkaline pH-shifting (p < 0.05), especially for MCC up to 99.50 %. Also, treatment made a significant decline in the particle size of MPC and MCC, as well as the turbidity of the proteins (p < 0.05). The foaming capacity of MPC, MCC, and WPI was all improved, especially at pH 11, and at this pH, the milk protein also showed the highest surface hydrophobicity. The best foaming capacity at pH 11 was the result of the combined effect of particle size, potential, protein conformation, solubility, and surface hydrophobicity. In conclusion, ultrasound-assisted pH-shifting treatment was found to be effective in improving the physicochemical properties and solubility and foaming capacity of milk proteins, especially MCC, with promising application prospect in food industry.     

Progress in DNA Aptamers as Recognition Components for Protein Functional Regulation

Proteins play a central role in all domains of life, and precise regulation of their activity is essential for understanding the related biological processes and therapeutic functions. Nucleic acid aptamers, the molecular recognition components derived from systematic evolution of ligands by exponential enrichment(SELEX), can specifically identify proteins with antibody-like recognition characteristics and help to regulate their activity. This minireview covers the SELEX-based selection of protein-binding aptamers, membrane protein analytical techniques based on aptamer-mediated target recognition, aptamer-mediated functional regulation of proteins, including membrane receptors and non-membrane proteins(thrombin as a model), as well as the potential challenges and prospects regarding aptamer-mediated protein manipulation, aiming to supply some useful information for researchers in this field.     

Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam Under Heat and Stress

A series of phenolic epoxy resin (PEP) modified polyurethane foams (PUF) were prepared via an in-situ polymerization, one step process. It was found that the epoxy modified PUF foam exhibited a perforated network structure with larger cell size, higher open cell porosity and enhanced ovality compared with pure PUF. With increasing content of PEP, the tensile strength, elongation at break and low temperature modulus of PUF decreased. A single T_g was observed for PEP modified PUF, indicating that the two component phases of the polyurethane-epoxy were miscible. With increasing PEP content, the T_g of PUF shifted slightly to higher temperature, tan δ_max dropped to lower values, and the retention value of the storage modulus at ?20 and ?10?°C increased. For pure PUF, the cell walls degraded and the structure became disordered after aging under heat and stress, while for PUF/20wt%PEP, the degradation degree was obviously reduced, and an orientation of the cells along the stress direction and a density increase was observed. During aging at 200?°C, the retention of the mechanical properties of PUF/20wt% PEP was much higher than that of pure PUF, and it showed superior stability under heat and stress, attributed to incorporation of the thermally resistant oxazolidone rings and benzene rings in the PU backbones, the highly cross-linked networks of the polyurethane-epoxy systems and the obvious orientation of the cells under stress.     

Self‐assembled polyurea macromer nanodispersion and resulting hybrid polyurea‐acrylic emulsions and films

A polyurea macromer (PUM) was synthesized and dispersed in basic conditions to form self‐assembled nanoparticles (<20 nm dispersions, up to 30 wt % aq. soln.). These nanoparticles enabled surfactant‐free emulsion polymerization to form hybrid polyurea‐acrylic particles despite the absence of a measureable water‐soluble fraction. The T_g of the starting PUM material was a strong function of the PUM's extent of neutralization and hydration (varying between 100 °C and >175 °C) due to changes in hydrogen and ionic bonding. Two separate hybrid polyurea‐acrylic emulsion systems were prepared: one by direct polymerization of (meth)acrylic monomers in the presence of the nanodispersion and a second by a physical blend of PUM nanodispersion with an acrylic latex control. The direct polymerization method resulted in a hybrid emulsion particle size that developed by a mechanism resembling conventional emulsion polymerization and was unlike that described for seeded polyurethane dispersion systems. Film hardness was shown to increase with increasing coating thickness for the hybrid film prepared by direct polymerization. The resulting mechanical properties could be explained by applying mechanical models for a composite foam structure. These results were unprecedented for normal elastomer films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1373–1388     

在线富集/高效液相色谱与电感耦合等离子体质谱联用测定玩具中超痕量可迁移六价铬

采用在线富集/高效液相色谱(HPLC)与电感耦合等离子体质谱(ICP-MS)联用技术,建立了玩具中超痕量可迁移六价铬的测定方法。以10 mmol/L硝酸铵为流动相,样品在Agilent BIO WAX NP5阴离子交换柱(4.6 mm×50 mm,5μm)中富集,再通过阀切换,以75 mmol/L硝酸铵将六价铬洗脱至Dionex AG7阴离子柱(4.0 mm×50 mm,10μm)中分离,最后经ICP-MS进行分析。优化得到在线富集时间为4 min,进样量为900μL,富集流速为0.4 mL/min,洗脱流速为0.6 mL/min。结果显示,六价铬在2～20 ng/L范围内线性良好,检出限为1.93 ng/L,相对标准偏差(RSD)为3.9%。与直接进样相比,浓缩因子约为8.1倍,富集效率约为90%。对欧盟玩具安全指令2009/48/EC规定的3类玩具材料在5、10 ng/L的浓度水平下进行加标回收,回收率为93.4%～111%。     

混凝土重力坝爆炸荷载数值分析及抗爆性能研究

利用LS-DYNA非线性有限元程序，基于Eulerian和Lagrangian耦合的方法，研究了RHT本构模型模拟的混凝土板在爆炸荷载下的动力反应，并且将数值结果与现场实验结果进行比较，由此说明了RHT本构模型模拟爆炸荷载下混凝土动力反应的有效性。研究了2 t TNT炸药在距离坝体上游面10 m不同起爆深度的情况下，有泡沫混凝土保护层和无泡沫混凝土保护层的坝体动力响应及其损伤状况。计算结果表明，无泡沫混凝土保护层时，坝体上游面主要损伤区域位置总是随起爆深度的增加向坝体底部移动；当上游表面有泡沫混凝土保护层时，坝体上游表面的损伤明显变小，下游面的损伤较无保护层情况也明显减小。表明泡沫混凝土能够有效减小混凝土大坝在爆炸荷载下的损伤，在提高混凝土大坝的抗爆性能方面起到很好的保护作用。     

POD enriched boundary models and their optimal stabilisation

Modes obtained using the Proper Orthogonal Decomposition are used as boundary enrichment functions within a variational multiscale method for the stochastically forced Burgers equation. Initially, large increases in accuracy are obtained using the enrichment functions without stabilisation terms. Then, optimal coefficients for the stabilisation parameter τ of the unresolved scale model are calibrated using a goal‐oriented model‐constrained optimisation technique, resulting in further improvements. As both the determination of the enrichment functions and the optimisation of the coefficients requires high‐accuracy reference data, a scaling procedure is introduced to allow their use over range of conditions. Numerical experiments confirm that the scaling procedure is effective. Copyright © 2014 John Wiley & Sons, Ltd.     

Selective enrichment of glycopeptides based on copper tetra(N‐carbonylacrylic) aminephthalocyanine and iminodiacetic acid functionalized polymer monolith

Efficient separation and enrichment of low‐abundance glycopeptides from complex biological samples is the key to the discovery of disease biomarkers. In this work, a new material was prepared by coating copper tetra(N‐carbonylacrylic) aminephthalocyanine and iminodiacetic acid onto poly(glycidyl methacrylate‐pentaerythritol triacrylate) monolith. The monolith was applied to polymer monolithic microextraction for specific capture of glycopeptides coupled with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The developed monolith exhibited satisfactory efficiency for glycopeptide enrichment with high selectivity and detection sensitivity. When the tryptic digest of immunoglobulin G was used as the sample, total 24 glycopeptides were identified and the detection limit was determined as 5 fmol. When the approach was applied to the analysis of glycopeptides in the mixture of bovine serum albumin and immunoglobulin G (100:1, m/m) digests, 16 glycopeptides could still be observed. Moreover, the monolith was successfully applied to the selective enrichment of glycopeptides from human serum digests, exhibiting great practicability in identifying low‐abundance glycopeptides in complex biological samples.