Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

Electrolytic PdMo deposits with high corrosion resistance in relation to palladium

1. Download : Download high-res image (72KB)
2. Download : Download full-size image

     

Preparation and performance of (Co,Mn)3O4 spinel coating on Crofer alloy by composite electrodeposition and step-heating thermal conversion

The preparation and performance improvement of the spinel coating on the surface of ferritic alloy is of wide interest for its application in the metallic interconnects of the solid oxide fuel cells (SOFCs). The Co Mn₂O₃ composite coating is prepared on the surface of the Crofer alloy by the composite electrodeposition method. A step-heating thermal conversion process is subsequently used to convert the composite coating into a spinel coating, while a direct-heating process is implemented as the control experiment. Isothermal oxidation tests are then carried out for the prepared samples in order to present the high temperature performance. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and area-specific resistance (ASR) are used to analyze the properties of the matrix and coatings. The experimental results reveal that the coatings by step-heating thermal conversion exhibit better performance of electrical conductivity and oxidation resistance than the coatings by direct-heating process. Furthermore, with the increase of oxidation time, the atomic proportion of Cr element diffusing to the surface of the matrix is maintained at about 3%–4% for the samples with spinel coatings by step heating, which effectively prevent the Cr volatilization in the matrix. The preparation of spinel coatings on the ferritic alloy by composite electrodeposition and step-heating thermal conversion is helpful to stimulate new ideas for the development of reliable and cost-effective metallic interconnect.     

Benefiting from information-rich multi-frequency AC voltammetry coupled with chemometrics on the example of on-line monitoring of leveler component of electroplating bath

Simultaneous application of multiple sinusoidal waveforms perturbations superimposed onto DC staircase step significantly enriches current response. The measured current is characterized by a matrix of data rather than a conventional voltammetric output in a form of a vector. This increase of the dimensionality of the current response and therefore the wealth of analytical information is achieved without compromising the time of analysis. The natural approach for compression of such data and extraction of relevant information is by utilizing multi-way chemometric decomposition techniques. An electroplating solution presents a very challenging analyte for electroanalysis as its constituents interact synergistically with each other during both the plating process and its simulation during electroanalysis. For some components the mechanism is not entirely understood. Therefore, the only way to benefit from the analytical data is by employing soft modeling. The electrode processes involving additives rely heavily on adsorption and, indirectly, on electron transfer kinetics for which AC voltammetry is an analytical technique capable of delivering informative signals. This paper presents a rigorous universal method for calculating and validating an exemplary multi-way calibration of a leveler component in a copper electroplating bath used in the semiconductor industry. The method presented employs comparatively Parallel Factor Analysis coupled with Inverse Least Squares Regression and multi-linear Partial Least Squares. The calibration training set consists of multi-frequency AC voltammetric data subjected to pretreatments aiming to select informative independent variables and exclude outliers.     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。     

阴极微弧电沉积制备Al2O3陶瓷层技术及研究进展

阴极微弧电沉积技术是一种在材料表面通过微弧放电沉积陶瓷层的表面处理技术,利用该技术可以在金属及非金属表面生成耐磨、耐蚀性能优异的陶瓷膜层.本文介绍了阴极微弧电沉积技术的研究现状以及应用阴极微弧电沉积技术制备Al2O3陶瓷层的方法和基本原理,并且对阴极微弧电沉积技术的影响因素进行了总结,阐述了阴极微弧电沉积技术的应用前景和存在的问题.     

Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection

With the aim of obtaining high corrosion resistant Zn–Sn alloy coatings from an ionic liquid, the effects of electrodeposition potential and electrolyte composition on the electrodeposition behavior, film composition, morphology and corrosion performance were investigated. Cyclic voltammograms indicate that Zn and Sn were co‐deposited at distinct reduction potentials as pure Zn and Sn elements. In addition, the phase composition analysis also showed that the obtained Zn–Sn alloy deposits (8 wt.%–45 wt.% Zn) consist of a two‐phase mechanical mixture of small aggregates of Zn and Sn metals. The Zn content of the alloy significantly increases as the electrodeposition potential and electrolyte Zn (II)/Sn (II) ratio increase. The corrosion performance study of the obtained Zn–Sn coatings showed that they have a passivation behavior and their corrosion resistance increases as the alloy‐Sn content increases. To improve their morphological properties, ethylene diamine tetraacetic acid additive was introduced into the electrolyte and greatly improved the morphology and corrosion resistance of the deposits. For the first time, it was shown that high corrosion resistance Zn–Sn coatings can be obtained from ionic liquids. Copyright © 2014 John Wiley & Sons, Ltd.     

Non‐destructive Patterning of Carbon Electrodes by Using the Direct Mode of Scanning Electrochemical Microscopy

Patterning of glassy carbon surfaces grafted with a layer of nitrophenyl moieties was achieved by using the direct mode of scanning electrochemical microscopy (SECM) to locally reduce the nitro groups to hydroxylamine and amino functionalities. SECM and atomic force microscopy (AFM) revealed that potentiostatic pulses applied to the working electrode lead to local destruction of the glassy carbon surface, most likely caused by etchants generated at the positioned SECM tip used as the counter electrode. By applying galvanostatic pulses, and thus, limiting the current during structuring, corrosion of the carbon surface was substantially suppressed. After galvanostatic patterning, unambiguous proof of the formation of the anticipated amino moieties was possible by modulation of the pH value during the feedback mode of SECM imaging. This patterning strategy is suitable for the further bio‐modification of microstructured surfaces. Alkaline phosphatase, as a model enzyme, was locally bound to the modified areas, thus showing that the technique can be used for the development of protein microarrays.     

亚硫酸盐无氰电沉积金新工艺及机制

直接以氯金酸作为主盐、 羟基乙叉二膦酸（HEDP）作为镀液稳定剂和镀层细化剂、 结合添加剂, 组成亚硫酸盐无氰镀金新工艺; 研究镀液稳定性、 镀层形态及金电沉积机制。结果表明, HEDP可明显提升镀液稳定性;不含HEDP的亚硫酸盐镀金液中, 镀层呈棒状晶粒并随沉积时间延长而逐渐生长,导致镀层外观随镀层厚度增加由金黄色转变为红棕色。镀液含有HEDP时, 金晶粒形态由棒状转变为棱锥状, 且棱锥状晶粒随沉积时间延长生长速率较小, 镀层厚度为1 μm时仍呈现金外观。电化学实验表明金电沉积不经历成核过程。     

Galvanostatically Deposited PtNi Thin-Films as Electrocatalysts for the Hydrogen Evolution Reaction

The synthesis of hybrid platinum materials is fundamental to enable alkaline water electrolysis for cost-effective H₂ generation. In this work, we have used a galvanostatic method to co-deposit PtNi films onto polycrystalline gold. The surface concentrations of Ni (Γ_Ni) and Pt (Γ_Pt) were calculated from electrochemical measurements; the Γ_Pt/Γ_Ni ratio and electrocatalytic activity of these materials towards hydrogen evolution reaction (HER) in 1 M KOH show a strong dependence on the current density pulse applied during the electrodeposition. Analysis of the Tafel parameters hints that, on these deposits, HER proceeds through a Volmer-Heyrovsky mechanism. The galvanostatically deposited PtNi layers present a high current output per Pt gram, 3199 A g_Pt⁻¹, which is significantly larger compared to other PtNi-based materials obtained by more extended and more complex synthesis methods.