Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048     

旋涂法制备WO3薄膜电致变色性能

"智能窗"大规模推广顺应可持续发展潮流,三氧化钨(WO_3)是生产"智能窗"的一种重要电致变色材料,但调控WO_3薄膜电致变色性能机制仍待进一步研究。采用旋涂法制备WO_3薄膜,重点研究了溶液浓度和旋涂次数对调控WO_3薄膜电致变色性能的影响。通过表面轮廓仪测量薄膜厚度,X射线衍射(XRD)测量薄膜结晶情况,原子力显微镜(AFM)和扫描电子显微镜(SEM)分析薄膜表面形貌,光谱仪测量薄膜初始态、着色态和褪色态的透射率。实验结果表明,随着溶液浓度增加(0. 2～1. 0 mol/L),薄膜厚度从9. 7 nm增加到33. 3 nm,透射率调制能力从0%提升到37. 0%;多次旋涂薄膜厚度线性增长,线性拟合优度(R~2)达0. 98,5次旋涂后透射率调制能力达51. 3%。改变溶液浓度和旋涂次数都是调控薄膜透射率调制能力的有效手段,精准调控薄膜透射率调制能力对设计不同应用场景的电致变色器件具有重大意义。     

Redox‐Active Tetraruthenium Macrocycles Built from 1,4‐Divinylphenylene‐Bridged Diruthenium Complexes

Metallamacrocylic tetraruthenium complexes were generated by treatment of 1,4‐divinylphenylene‐bridged diruthenium complexes with functionalized 1,3‐benzene dicarboxylic acids and characterized by HR ESI‐MS and multinuclear NMR spectroscopy. Every divinylphenylene diruthenium subunit is oxidized in two consecutive one‐electron steps with half‐wave potential splittings in the range of 250 to 330 mV. Additional, smaller redox‐splittings between the +/2+ and 0/+ and the 3+/4+ and 2+/3+ redox processes, corresponding to the first and the second oxidations of every divinylphenylene diruthenium entity, are due to electrostatic effects. The lack of electronic coupling through bond or through space is explained by the nodal properties of the relevant molecular orbitals and the lateral side‐by‐side arrangement of the divinylphenylene linkers. The polyelectrochromic behavior of the divinylphenylene diruthenium precursors is retained and even amplified in these metallamacrocyclic structures. EPR studies down to T=4 K indicate that the dications 1‐H²⁺ and 1‐OBu²⁺ are paramagnetic. The dications and the tetracation of macrocycle 3‐H display intense (dications) or weak ( 3‐H⁴⁺ ) EPR signals. Quantum chemical calculations indicate that the four most stable conformers of the macrocycles are largely devoid of strain. Bond parameters, energies as well as charge and spin density distributions of model macrocycle 5‐H^Me were calculated for the different charge and spin states.     

Electrochromic Detection of Latent Fingermarks on Metal Surface Using 1,1′-Dibenzyl-4,4′-bipyridinium Dichloride

The electrochromic detection of latent fingermarks on polished or unpolished, flat or curved metal surfaces is described using electrochromic material, 1,1’-dibenzyl-4,4’-bipyridinium dichloride. The surface area covered by fingermarks acts as an insulating mask, causing 1,1’-dibenzyl-4,4’-bipyridinium dichloride to change color and produce inversed images of the fingermark. By changing the applied potential, the optical properties of 1,1’-dibenzyl-4,4’-bipyridinium dichloride can be continuously and reversibly adjusted to optimize the visual contrast of fingermarks, so as to realize the detection of latent fingermarks on stainless steel surface. It is demonstrated that the fabricated electrochromic devices can detect the fingermarks on these types of surfaces within twenty seconds at −1.0∼−2.0 V. This work can qualify as a tangible improvement in fingermark detection of the natural fingermarks on the never-cleaned (more than 3 years) and curved surfaces of daily-used container, e. g. cup, and the handle of cleaning tool, mop.     

Bis-triarylamine with a cyclometalated diosmium bridge: A multi-stage redox-active system

A tetra(pyrid-2-yl)-pyrazine-bridged cyclometalated diosmium complex 1(PF6)2with two distal redoxactive organic amine substituents has been synthesized and characterized. This complex displays four consecutive and separated anodic redox waves at +0.24, +0.38, +0.64, and +0.71 V vs. Ag/Ag Cl. Upon stepwise oxidation, four-step absorption spectral changes in the visible to near-infrared region have been observed. The different redox states of 1(12+through 16+) can be distinguished by the significantly different absorption spectra in the visible and near-infrared region. DFT calculations of 13+show that the spin is delocalized on both osmium–amine components.     

Solution‐processable transmissive‐to‐green switching electrochromic polyamides bearing 2,7‐bis(diphenylamino)naphthalene units

A new 2,7‐bis(diphenylamino)naphthalene‐based diamine monomer, N,N′‐bis(4‐aminophenyl)‐N,N′‐bis(4‐methoxyphenyl)‐2,7‐naphthalenediamine, was synthesized and polymerized with various aromatic dicarboxylic acids via the phosphorylation polyamidation reaction leading to a new series of redox‐active and electrochromic aromatic polyamides. The polyamides exhibited high solubility in many polar aprotic solvents, good film‐forming ability, and high thermal stability. They also showed stable electrochemical stability and anodically green coloring when oxidized. The two arylamino centers showed a weak electronic interaction via the 2,7‐naphthalenediyl bridge, and thus they started to oxidize almost at the same time. No intervalence charge transfer (IVCT) absorption was observed during the oxidation processes of these polyamides. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1409–1421     

7,7,8,8‐Tetraaryl‐o‐quinodimethane Stabilized by Dibenzo Annulation: A Helical π‐Electron System That Exhibits Electrochromic and Unique Chiroptical Properties

When two benzene rings are fused to a tetraaryl‐o‐quinodimethane skeleton, sterically hindered helical molecules 1 acquire a high thermodynamic stability. Because the tetraarylbutadiene subunit contains electron‐donating alkoxy groups, 1 undergo reversible two‐electron oxidation to 2 ²⁺, which can be isolated as deeply colored stable salts. Intramolecular transfer of the point chirality (e.g., sec‐butyl) on the aryl groups to helicity induces a diastereomeric preference in dications 2 b ²⁺ and 2 c ²⁺, which represents an efficient method for enhancing circular‐dichroism signals. Thus, those redox pairs can serve as new electrochiroptical response systems. X‐ray analysis of dication 2 ²⁺ revealed π–π stacking interaction of the diarylmethylium moieties, which is also present in solution. The stacking geometry is the key contributor to the chirosolvatochromic response.     

Bifunctional Nanoscale Assemblies: Multistate Electrochromics Coupled with Charge Trapping and Release

We demonstrate controlled charge trapping and release, accompanied by multiple color changes in a metallo‐organic bilayer. The dual functionality of the metallo‐organic materials provides fundamental insight into the metal‐mediated electron transport pathways. The electrochemical processes are visualized by distinct, four color‐to‐color transitions: red, transparent, orange, and brown. The bilayer is composed of two elements: 1) a nanoscale gate consisting of a layer of well‐defined polypyridyl ruthenium complexes bound to a flexible transparent electrode, and 2) a charge storage layer consisting of isostructural iron complexes attached to the surface of the gate. This gate mediates or blocks electron transport in response to an applied voltage. The charge storage and release depend on the oxidation state of the layer of ruthenium complexes (=gate). Combining electrochemistry with optical data revealed mechanistic information: the brown coloration of the bilayer directly relates to the formation of intermediate ruthenium species, providing evidence for catalytic positive charge release mediated through the gate.     

Designed synthesis of ZnO/PEDOT core/shell hybrid nanotube arrays with enhanced electrochromic properties

Designed growth of zinc oxide (ZnO)/poly(3,4-ethylenedioxythiophene) (PEDOT) core/shell hybrid nanotube arrays has been achieved by electropolymerization technique. The ZnO/PEDOT hybrid nanotubes electropolymerized for 2000-second display enhanced electrochromic properties of the contrast ratio up to 31.3%, a lot higher than those of the pure PEDOT and ZnO/PEDOT hybrid nanorods. Moreover, the coloring efficiency of the hybrid nanotubes increases from 105.2 cm² C⁻¹ of ZnO/PEDOT hybrid nantotube with the electrodeposition time of 1000 seconds to 122.2 cm² C⁻¹ of 2000 seconds at 520 nm. Therefore, the hybrid composite nanotubes fabricated by the in situ electrodeposition techniques may demonstrate huge potential applications in energy-saving technologies such as smart windows.