Two-Layered Poly-o-phenylenediamine/Polyaniline Composite: Electrosynthesis and Spectroelectrochemical Properties

Spectroelectrochemical properties of poly-o-phenylenediamine (PPD) and the synthesized composite of PPD and polyaniline—two chemically related polymers containing an amino-substituted benzene ring but having different conduction nature—are studied. The polyaniline synthesis on PPD-modified electrodes involves stages of the reaction initiation, the copolymer formation, and the formation of a polyaniline layer at the copolymer/solution interface.     

Low Temperature Sol-Gel Preparation of Nanocrystalline TiO2 Thin Films

TiO₂ nanocrystalline thin films with varying degree of porosity have been prepared using a low temperature method. TiO₂ films of the anatase form have been obtained by using a polyethylene glycol (PEG) modified sol-gel method. Densification and crystallization of the films was found to result from the thermal treatment of the dip coated films in boiling water. The films have been characterized by Raman, XRD, FTIR, AFM and optical methods. Highly transparent films with transmission in excess of 85% and porosity as high as 58% are formed predominantly of anatase crystallites of dimensions of the order of 5 nm. Initial results on lithium intercalation into these films resulting in an efficient optical modulation in the visible and near infrared regions demonstrate a good potential of these films for electrochromic applications.     

Preparation of a Star Network PEG-based Gel Polymer Electrolyte and Its Application to Electrochromic Devices

A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.     

Functional Polyoxometalate Thin Films via Electrostatic Layer-by-Layer Self-Assembly

Polyoxometalates (POMs) comprise a structurally diverse class of inorganic transition metal oxygen clusters which—owing to their unique electronic properties—hold promise for a host of technological applications such as electrochromic windows, sensors, or heterogeneous catalysts, prototypic examples of which will be briefly exemplified. The integration of POMs into functional architectures and devices, however, necessitates the development of general methods that allow positioning these clusters in well-defined supramolecular architectures, thin films, or mesophases. This short review highlights recent advances in the preparation of composite multilayers fabricated by electrostatic layer-by-layer self-assembly (ELSA) of POMs and a variety of water-soluble cationic species, including transition metal complexes, cationic surfactants, polycations and bipolar pyridine.     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Multiple Mechanism of NCA Polymerization: Effect of N-Acetylglycine NCA and Related Additives

Polymerization of α-aminoisobutyric acid NCA by alkaline salts of various basicity as well as amines has been investigated. The study was focused on the effect on the initial polymerization rate of additives such as N-acetylglycine NCA and some other less electrophilic additives (l-acetyl-2-pyrrolidone, 3-acetyl-2-oxazolidone, 1-acetyl-3-methylhydantoin) which are all models of the growing chain end produced by the NCA anion pathway. The acetyl endgroup was detected by 250 MHz ¹H-NMR in all the polymers of α-aminoisobutyric acid NCA obtained in the presence of l-acetyl-3-methylhydantoin and triethyl amine or sodium methoxide initiators, whereas the additives influenced variously the kinetics of polymerization according to the nature of the initiator used. The results were interpreted in the light of a multiple mechanism supposing the simultaneous presence of the initiator anion, its conjugate acid, and NCA anion for basic salt initiation. Thus, the observed effect has to be considered as the sum of an elementary acceleration due to NCA anion and of an elementary deceleration due to the initiator anion. Predominance of the pathways involving NCA anion could be shown this way. This conclusion could be extended to γ-benxyl-L-glutamate NCA which is a more reactive NCA. However, the deceleration observed with some additives led us to believe that a nonnegligible participation of initiator anion during initiation cannot be excluded.     

Novel Bis-arylPheDOT Synthons for Electrochromic Polymers

Two terthiophenes incorporating the synthon 3,4-(1,2-phenylenedioxy)thiophene (PheDOT) have been developed. Specifically, 2,5-bisthienyl-3,4-(1,2-phenylenedioxy)thiophene (BTh-PheDOT 1) and 2,5-bisethylenedioxythienyl-3,4-(1,2-phenylenedioxy)thiophene (BEDOT-PheDOT 2) were electropolymerized to form electroactive polymer films (P1 and P2) that switched between two highly colored states with the more electron-rich EDOT derivative P2 observed to switch at a lower potential. Additionally, both P1 and P2 displayed moderate to low optical bandgaps of 1.8 and 1.6 eV, respectively. Crystal structures of BTh-PheDOT showed the monomer to be nearly planar with π -stacking observable between monomers. These findings demonstrate the potential of PheDOT as an electroactive synthon for the formation of well-ordered systems.     

Bipolar Electrode-based Electrochromic Devices for Analytical Applications – A Review

Bipolar electrode-based (BPE-based) electrochromic devices have garnered increasing attention in the past decade. These BPE-based electrochromic devices have been used for analytical health monitoring, point-of-care (POC) diagnostics, and chemical sensing. In this review, we highlight recent progress made regarding BPE-based electrochromic devices constructed for these analytical applications. Various, available electrochromic materials are summarized in the first section, after which the different device types (e. g., paper-based and self-powered) are discussed. Biological- and chemical-based analytical demonstrations of these devices are then reviewed. Finally, we conclude this review with a perspective on the future developments of BPE-based electrochromic devices in analytical applications.     

Novel electroactive poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups: Synthesis and properties

We present a series of novel poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups. A novel monomer containing oligoaniline, 2,6‐difluorobenzoyl aniline tetramer (DFAT), was synthesized by reaction of 2,6‐difluorobenzoyl chloride and parent aniline tetramer and incorporated into the aforementioned copolymers via direct copolymerization with 4,4′‐dichlorodiphenyl sulfone (DCDPS), and 4,4′‐isopropylidene diphenol (BPA) using N,N′‐dimethylacetamide as solvent. The structures of these copolymers were confirmed by FTIR, ¹H NMR, and GPC. Spectral analysis of the copolymers in different oxidation states was investigated via UV‐visible spectra. The copolymers exhibited outstanding thermal stability and good solubility in various organic solvents. Their electroactivity, explored with cyclic voltammetry, was found to increase as the content of oligoaniline in the polymer increased. The electric and dielectric properties of the copolymers were also studied in detail. The electrochromic performance of the copolymers was investigated by electrochromic photographs and transmittance spectra; the color of the copolymer thin films changes from grey (at 0.0 V), to green (at 0.4 V), to blue (at 0.6 V) and to pearl blue (at 1.0 V) and the maximum transmittance change (ΔT) at 700 nm is 42.6% (90.7% ? 48.1%). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011