基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上，采用电化学发光（ECL）和电化学阻抗（EIS）2种技术，协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明，DNA链中心位点的C-A单碱基错配稳定性低于链两端的，靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的，同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。     

Photophysical Properties and Efficient,Stable, Electrogenerated Chemiluminescence of Donor–Acceptor Molecules Exhibiting Thermal Spin Upconversion

The photophysical properties and electrogenerated chemiluminescence (ECL) of three donor–acceptor molecules composed of dicyanobenzene and methyl‐, tert‐butyl‐, and phenyl‐substituted carbazolyl groups, 1,2,3,5‐tetrakis(3,6‐disubstituted‐carbazol‐9‐yl)‐4,6‐dicyanobenzene (4CzIPN‐Me, 4CzIPN‐tBu, and 4CzIPN‐Ph, respectively) are described. These molecules show delayed fluorescence as a result of thermal spin upconversion from the lowest triplet state to the lowest singlet state at room temperature. The three molecules showed yellow to yellowish–red ECL. Remarkably, the ECL efficiencies of 4CzIPN‐tBu in dichloromethane reached almost 40 %. Moreover, stable ECL was emitted from 4CzIPN‐tBu and 4CzIPN‐Ph. In case of 4CzIPN‐Me, the ECL intensity decreased during voltage cycles because of polymerization. Quantum chemical calculations revealed that polymerization was inhibited by the steric hindrance of the bulky tert‐butyl and phenyl groups on the carbazolyl moieties and lowered the spin density on the carbazolyl groups through electron conjugation for 4CzIPN‐Ph.     

凝胶渗透色谱-气相色谱-离子阱质谱法测定桔梗原药和当归提取物中101种农药残留

建立了凝胶渗透色谱（GPC）-气相色谱-离子阱质谱同时检测桔梗原药和当归提取物中101种农药残留的分析方法。方法采用乙腈超声辅助提取桔梗原药和当归提取物,浓缩提取液至近干后用乙酸乙酯-环己烷（1∶1, v/v）复溶,采用凝胶渗透色谱法（选取40 cm长、内径20 mm的凝胶渗透色谱柱）对样品进行净化,弃去前段含脂类、色素等杂质的流出液,收集17~30 min洗脱液并旋转蒸发浓缩至近干,甲苯1 mL定容上机。选用DB-5MS毛细管色谱柱分离待测物,通过离子阱质谱实现对101种农药残留的高效检测。方法通过优化前处理条件和离子阱二级质谱参数,有效降低了复杂中药基质对待测化合物的干扰,最大限度提高了样品中农药的定量准确性和回收率,101种农药3水平添加的平均回收率为58.3%~108.9%,每个添加水平10次独立重复测定的相对标准偏差为0.4%~16.5%,检出限（LOD）范围为0.2~40.0 μg/kg,可满足当前韩国、日本、欧洲规定的最大残留限量（maximum residue limits, MRLs）要求。方法具有操作简单快速、灵敏度高、重复性好等特点,凝胶渗透色谱技术的应用克服了固相萃取小柱净化容量不足的弊端,离子阱技术的应用可以进一步排除共流出基体杂质的干扰,提高定量和定性的准确性,检测效果优于常用的气相色谱-质谱法,是对中药中同时分析多种农药残留检测方法的有益补充。     

A sensitive DNA biosensor based on the distance dependent quenching of Silica@Ru(bpy)32+-chitosan-GO electrochemiluminescence by Ferrocene@Gold nanoparticles

A sensitive electrochemiluminescence (ECL) biosensor for the specific DNA sequence of hepatitis C virus (HCV) was developed based on the efficient quenching effect of the ferrocene cluster functionalized gold nanoparticles (Fc@AuNPs) on the ECL of electrodeposited silica@Ru(bpy)₃²⁺-chitosan-graphene oxide nanocomposite (SiO₂@Ru−CS−GO). Graphene oxide (GO) can accelerate electron transfer rate, thus improving the ECL of Ru(bpy)₃²⁺ on electrode surface. The molecular beacons (MB) was fixed to SiO₂@Ru−CS−GO by glutaraldehyde (GA) using the Schiff reaction between amino groups of chitosan (CS) and MB. The ECL of SiO₂@Ru−CS−GO was depressed greatly by the Fc@AuNPs labelled at the end of MB, then, a stronger ECL was observed when the distance between Fc@AuNPs and SiO₂@Ru−CS−GO increased after the hybridization of target DNA with MB. Under optimum conditions, the restored ECL intensity increased linearly with the target DNA concentration in the range of 1.0×10⁻¹⁶∼1.0×10⁻¹⁰ mol ⋅ L⁻¹, and the limit of detection (LOD) is 1.4×10⁻¹⁷ mol ⋅ L⁻¹. The proposed method exhibits acceptable stability and reproducibility. In general, the constructed HCV biosensor can be used for the sensitive detection of HCV in human serum, suggesting potential application prospects in bioanalysis.     

基于铱纳米棒的电致化学发光生物传感器用于多巴胺检测

铱(Ⅲ)配合物差的水溶性限制了其在电致化学发光(ECL)领域的应用。该文用聚(苯乙烯-马来酸酐)(PSMA)羧基功能化三(2.苯基吡啶)铱(Ⅲ)(Ir(ppy)3)合成水溶性铱纳米棒(Ir NDs)。在共反应试剂三丙胺(TPrA)存在下,Ir NDs 表现出优良的ECL性能。借助多巴胺(DA)对Ir NDs-TPrA体系ECL的高效猝灭作用,实现了对DA的高灵敏检测,线性范围为2.0×10-8~4.0×10-4 mol/L,检出限为6.3×10-9 mol/L。羧基功能化的Ir NDs为铱(Ⅲ)配合物在ECL领域的应用提供了理想平台,也为DA的检测提供了新方法。     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.     

质子水合结构的振动态密度分析

使用基于多态经验价键模型的分子动力学模拟, 对水溶液中质子的水合结构及其在质子传递过程中的动力学过程进行了研究. 在价键模型的方法下, 质子的水合结构主要以H₉O₄⁺(Eigen)以及过渡态的H₅O₂⁺(Zundel)结构形态存在, 且在这两种结构中以Eigen的形态表现明显. 通过对质子传递过程中不同水合结构的态密度频谱分析, 发现一个在2000~3000 cm^-1范围内的明显连续的宽吸收谱带, 主要归因于Eigen结构的贡献, 这些特征峰的出现与水合氢离子第一溶剂化层内的强氢键作用密切相关. 对于Zundel的结构, 在1760 cm^-1处出现一个较为明显的肩峰, 归属为质子传递模式的特征振动. 通过对质子水合结构态密度频谱的分析, 可望增强对于稀酸溶液红外光谱中的连续宽吸收带以及质子传递的微观动力学过程的理解.     

高通量虚拟筛选CDK2/Cyclin A2靶点抑制剂

CDK2/Cyclin A2复合蛋白的异常表达与乳腺癌、 口腔癌、 食管鳞状细胞癌的发生密切相关. CDK2/ Cyclin A2复合蛋白的活性位点不同于CDK2单体. 至今临床上尚无靶向此复合蛋白的药物分子. 针对CDK2/Cyclin A2复合蛋白, 以实验报道的10个抑制剂分子构建药效团模型, 通过药物体外药代动力学（ADME）、 Docking、 聚类分析、 毒性预测, 从DrugBank, ChEMBL和TCM@Taiwan 3个数据库约90万组数据中进行高通量虚拟筛选, 进一步进行MD模拟、 MM/PBSA结合自由能计算、 能量分解和平均非共价作用(aNCI)分析, 筛选出3个抑制效果优于阳性实验药Roscovitine的先导分子: DrugBank-2004, DrugBank-583和ChEMBL-7122. 与CDK2蛋白相比, CDK2/Cyclin A2复合蛋白结合位点空间变大, 先导分子与Lys33, Asp86, Lys129和Asp145残基之间的排斥作用有所降低, 导致结合自由能更大.     

Bipolar Electrochemiluminescence Imaging: A Way to Investigate the Passivation of Silicon Surfaces

This work depicts the original combination of electrochemiluminescence (ECL) and bipolar electrochemistry (BPE) to map in real-time the oxidation of silicon in microchannels. We fabricated model silicon-PDMS microfluidic chips, optionally containing a restriction, and monitored the evolution of the surface reactivity using ECL. BPE was used to remotely promote ECL at the silicon surface inside microfluidic channels. The effects of the fluidic design, the applied potential and the resistance of the channel (controlled by the fluidic configuration) on the silicon polarization and oxide formation were investigated. A potential difference down to 6 V was sufficient to induce ECL, which is two orders of magnitude less than in classical BPE configurations. Increasing the resistance of the channel led to an increase in the current passing through the silicon and boosted the intensity of ECL signals. Finally, the possibility of achieving electrochemical reactions at predetermined locations on the microfluidic chip was investigated using a patterning of the silicon oxide surface by etched micrometric squares. This ECL imaging approach opens exciting perspectives for the precise understanding and implementation of electrochemical functionalization on passivating materials. In addition, it may help the development and the design of fully integrated microfluidic biochips paving the way for development of original bioanalytical applications.