Electroanalytical Techniques for the Detection of Selenium as a Biologically and Environmentally Significant Analyte—A Short Review

This short review deals with the properties and significance of the determination of selenium, which is in trace amounts an essential element for animals and humans, but toxic at high concentrations. It may cause oxidative stress in cells, which leads to the chronic disease called selenosis. Several analytical techniques have been developed for its detection, but electroanalytical methods are advantageous due to simple sample preparation, speed of analysis and high sensitivity of measurements, especially in the case of stripping voltammetry very low detection limits even in picomoles per liter can be reached. A variety of working electrodes based on mercury, carbon, silver, platinum and gold materials were applied to the analysis of selenium in various samples. Only selenium in oxidation state + IV is electroactive therefore the most of voltammetric determinations are devoted to it. However, it is possible to detect also other forms of selenium by indirect electrochemistry approach.     

脱氧核糖核酸电分析化学研究进展

就DNA电分析化学研究及其应用方面进行综述，主要叙述了DNA的各种电分析化学方法，以及DNA电化学传感器的原理，应用以及发展，本文引用文献77篇。     

电解法微量溶解氧分析仪校准装置的研制

基于法拉第电解定律研制电解法微量溶解氧分析仪校准装置。利用理论计算确定校准装置的技术指标及水中微量溶解氧浓度的不确定度，经与比色法比对，该装置用于校准微量溶解氧分析仪的可行性得到验证。     

镉、铅、铬、铜的电化学分析

介绍了镉、铅、铬、铜的电化学分析方法及其在现代环境分析中的应用,并对电化学分析方法的发展前景进行了展望。引用文献36篇。     

抗坏血酸和尿酸在胶束体系中的电化学行为及选择性测定的应用

以玻碳电极为工作电极,在PBS中用循环伏安法研究了抗坏血酸(AA)和尿酸(UA)在胶束体系中的电化学行为。在溴化十六烷基吡啶(CPB)胶束体系中,AA和UA的氧化峰电流增加,峰电位负移;在十二烷基苯磺酸钠(SDBS)胶束体系中,AA和UA的氧化峰电流减小,峰电位正移。在CPB中,AA和UA的氧化峰电位相差约270 mV,以此建立了AA和UA的同时测定方法。用微分脉冲伏安法测定AA和UA的氧化峰电流分别在1.0×10-6~1.0×10-2mol/L和5.0×10-7~1.0×10-3mol/L的范围内与各自的浓度范围呈良好的线性关系。在200倍AA共存时UA的检出限为5.0×10-6mol/L。此方法可应用于人体尿样中UA的测定,结果令人满意。     

Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.     

蛋白质的电化学分析研究进展

对蛋白质的电化学分析的进展及应用进行综述。从蛋白质的极谱行为、在固体电极上的电化学行为、催化氢波、与小分子物质的配合作用等多角度介绍了近期的研究热点，分析了蛋白质化学研究的意义与现状，并对今后的发展方向作了展望，引用相关文献28篇。     

Electroanalytical sensors for nonconducting media based on electrodes supported on perfluorinated ion-exchange membranes

Electroanalytical sensors, suitable for the analysis and monitoring of electroactive analytes present in gaseous phase or low-conductive liquid media, and based on electrodes in close contact with perfluorinated ion-exchange polymers are reviewed. The basic operative mechanism of these sensors, in which ion-exchange polymers act as solid polymer electrolytes (SPE's), is thoroughly discussed, while stressing the fundamental reasons why their behavior differs from that of conventional membrane electrodes. The procedures for preparing composite working electrodes by coating one side of ion-exchange membranes with stable porous films of conductive materials are described, along with the most common strategies followed to assemble this type of sensors. Useful examples of measurements in electrolyte-free media of inorganic and organic electroactive species of interest mainly for environmental analysis are given. Future prospects for the development of these sensors are also discussed.     

Facile Fabrication of a Graphene‐based Electrochemical Biosensor for Glucose Detection

A simple and effective glucose biosensor based on immobilization of glucose oxidase (GOD) in graphene (GR)/Nafion film was constructed. The results indicated that the immobilized GOD can maintain its native structure and bioactivity, and the GR/Nafion film provides a favorable microenvironment for GOD immobilization and promotes the direct electron transfer between the electrode substrate and the redox center of GOD. The electrode reaction of the immobilized GOD shows a reversible and surface‐controlled process with the large electron transfer rate constant (k_s) of 3.42±0.08 s^?1. Based on the oxygen consumption during the oxidation process of glucose catalyzed by the immobilized GOD, the as‐prepared GOD/GR/Nafion/GCE electrode exhibits a linear range from 0.5 to 14 mmol·L^?1 with a detection limit of 0.03 mmol·L^?1. Moreover, it displays a good reproducibility and long‐term stability.