不同的灰熔点调控方式对煤灰熔融特性的影响

对两种原始煤灰进行混合,并分别搭配不同的添加剂,得到3种元素组成相同的煤灰,灰熔点测试结果显示,三者的灰熔点存在较大差异。结合X射线衍射技术和SEM-EDX(扫描电子显微镜与能谱联用)分析了3种煤灰(>800 ℃)在高温时的矿物质转化过程。结果表明,不同的灰熔点调控手段对不同煤的影响是不同的。原因是高温时矿物质组成不仅与煤灰化学元素组成相关,更与元素在矿物质中的赋存状态有关。两者共同决定了煤灰的熔融特性。     

煤催化气化条件下不同煤种煤灰烧结行为研究

选取9类典型煤种,利用压差法测定烧结温度的实验装置,结合灰渣的XRD分析结果,考察了添加K基碱金属催化剂、不同煤种灰成分对烧结温度的影响。结果表明,碳酸钾催化剂的添加,明显降低高铁钙含量的WJT煤的灰熔点及烧结温度,碱金属K化合物极易同煤中Fe、Ca的矿物质反应生成低温共融物进而加剧煤灰的熔融结渣。不同煤种烧结温度的差异与煤灰中硅、铝、铁、钙含量密切相关。铝、硅含量高的煤灰烧结温度较高,而铁、钙含量高的煤灰烧结温度相对较低。碱金属K催化剂的添加加剧了煤灰的烧结结渣,而钙、铁的存在会加速硅铝酸盐间的反应生成低温共融物进而加速灰熔融。各煤种烧结温度的变化与其灰成分在CaO-SiO₂-Al₂O₃、FeO-SiO₂-Al₂O₃三元相图上的位置相吻合。     

REMEDIATION OF POLLUTED SOILS BY UTILIZING HYDROTHERMALLY TREATED CALCAREOUS FLY ASHES

This paper investigates a treated fly ash to act as a synthetic zeolite to remediate soils polluted with heavy metals and metalloids （As, Pb, Cu, Zn, Fe, Cd and Mn）. Four types of such ＇zeolites＇ were synthesized by hydrothermal treatment of a calcareous fly ash derived from Greek lignite-fired power plants： two with excess of sodium hydroxide in a solid/liquid ratio of 50 g·L^-1, and two with excess of fly ash in a solid/liquid ratio of 100g·L^-1. Soil samples were obtained from a former mining site at Lavrion, Greece. Mobilization and transfer of metals to the retention agents was effected by using HCI aq 1M, with satisfactory results with respect to As, Pb, Cu, Mn and Cd. The great variety of metal complexes in soil was found to be of major importance for the effectiveness of the overall process. The final products were solidified either on their own, or by using additives such as lime and cement.     

VITRIFICATION OF LIGNITE FLY ASH AND METAL SLAGS FOR THE PRODUCTION OF GLASS AND GLASS CERAMICS

This work focuses on the production of glass and glass-ceramics by using industrial wastes or by-products, e.g., two fly ashes from the combustion of lignite, a slag from the production of Fe-Ni and a slag from the making of steel. Vitrification took place at 1 350°-1450℃ and crystallization was achieved by heat treatment at 900, 950 and 1 000℃. The capability of the waste to be vitrified and subsequently devitrified was determined by XRD techniques. The crystalline phase depends greatly on the structure of the by-product and the heat treatment. The final products showed low leachability and good hardness.     

粉煤灰填充聚氯乙烯复合材料的摩擦学特性研究

用热压方法制备了不同粉煤灰粒度及含量的聚氯乙烯(PVC)复合材料，在MM—200型环—块摩擦磨损试验机上评价了复合材料同淬火45^#钢在干摩擦条件下对摩时的摩擦磨损性能，用扫描电子显微镜及光学显微镜观察分析磨损表面．结果表明：当粉煤灰质量分数为40％时，填充PVC复合材料的硬度最高，相应的磨损率最低，比纯PVC的磨损率低2个数量级以上；粉煤灰粒度越小，复合材料的硬度越高，耐磨性越好．     

循环流化床粉煤灰可控制备高纯F型八面沸石研究

利用粉煤灰制备沸石分子筛是其高值化利用的重要方向之一.以循环流化床粉煤灰为原料,采用酸浸预处理-氢氧化钠碱熔活化-水热晶化法制备F型八面沸石,并用于吸附亚甲基蓝.考察酸浸温度、碱熔温度及碱灰质量比对粉煤灰结构的影响及碱熔温度、碱灰质量比、液固比及晶化时间对沸石的结构和形貌的影响.通过XRD和SEM对粉煤灰沸石的晶体结构和形貌进行表征.结果表明,利用循环流化床粉煤灰制备高纯F型八面沸石适宜条件为碱熔温度550℃,碱灰质量比1.5:1,液固比12 mL/g,晶体导向剂用量10;,晶化温度100℃,晶化时间20 h.其比表面积高达357 m2/g,且对亚甲基蓝的饱和吸附量高达178 mg/g.     

煤与生物质混烧灰荷电特性研究

对玉米秸分别与两种煤以不同比例混烧生成的混烧灰进行了荷电特性研究。利用法拉第杯荷电量检测系统和静电低压撞击器(ELPI)测量了混烧灰的总体荷质比及分级荷质比,并借助于成分分析及形貌分析结果讨论了其影响机理。结果表明,随着生物质掺入量在混烧燃料中的增加,混烧灰的成分组成发生变化,使得其介电常数变大,比电阻增大,表面吸附能力增强,从而使混烧灰的总体荷质比有一定的上升趋势。对混烧灰的分级荷质比测量结果表明,排除灰样粒径的影响,生物质的掺入使得混烧灰的荷电能力得以增强,但影响相对较小,颗粒粒径是影响混烧灰荷电能力的主要因素。     

Dynamic Rebound Behavior of Silica/Natural Rubber Composites: Fly Ash Particles and Precipitated Silica

This article investigated the elastic response of natural rubber (NR) compounds filled with silica from fly ash particles (FASi) and commercial precipitated silica (PSi), through a dynamic rebound test. The effects of silica content and initial drop‐height on the height and number of rebounds, dynamic stiffness, and the energy loss were of interest. The results suggested that the unfilled NR vulcanizates exhibited a greater elastic response than the FASi and PSi‐filled vulcanized composites. For given silica contents, the NR compounds with FASi had better elastic response than those with PSi, where the elastic response decreased with an increase in silica content. The greater the silica contents, the higher the dynamic stiffness of the composites. The initial drop‐height had no effects on the elastic response change for the unfilled NR compound, but resulted in an increase in the energy loss for the silica‐filled NR composites. The differences in the elastic responses for the NR compounds filled with silica from FASi and PSi were associated with the differences in crosslink density and the filler–filler interaction influenced by content of bis(3‐triethoxysilylpropyl) tetrasulfane (designated as Si69) used.     

Fly‐Ash‐Supported Synthesis of 2‐Mercaptobenzothiazole Derivatives under Microwave Irradiation

Microwave‐assisted, solvent‐free alkylation and acylation of 2‐mercaptobenzothiazole has been attempted using silica gel, alumina, and a new solid support, fly ash. Fly ash, a waste generated at thermal power stations, could be used as solid support just as efficiently as commercial supports. The additional features of methodology include a much faster reaction, easy workup, higher yields, higher purity of the products, and an ecofriendly approach.     

Mg2+和Na+对高熔点煤灰熔融性的影响

以山西阳泉固庄高熔点煤灰为研究对象,通过向煤灰中添加不同量的MgO与Na₂CO₃,研究了Mg²⁺与Na⁺在高温下对煤灰熔融性的影响。研究结果表明,煤灰熔融温度随氧化镁的添加(5%~25%)单调下降;而随氧化钠添加(5%~25%)出现先降后升现象,在氧化钠添加量为15% 时,灰熔点达到最低。XRD分析表明,阳泉固庄煤灰熔融温度高(大于1 750℃)的原因是高温条件下耐熔矿物莫来石、方英石的存在。添加外加剂后,高温时外加剂与硅酸盐矿物反应,生成了更多的低共熔矿物霞石、堇青石等。同时,Mg²⁺和Na⁺的加入会使得非桥氧数量增多,高温煤灰低聚物增多,降低了煤灰的熔融温度。通过三元相图以及SEM分析,高温条件下煤灰中部分元素的富集以及团聚现象是导致Mg²⁺和Na⁺对煤灰熔融温度影响不同的原因。