Synthesis and characterization of oxidized cellulose

Samples of oxidized cellulose (OC) with various carboxyl contents and degrees of crystallinity were obtained by the oxidation of native and mercerized cellulose with a solution of nitrogen(IV) oxide in CCl₄. A detailed characterization of these OC samples was performed. The effect of oxidation conditions (concentration of N₂O₄ in the solution and oxidation time) and starting cellulose material on OC characteristics (carboxyl, carbonyl and nitrogen content, degree of crystallinity and polymerization, surface area and swelling, and acidic properties) was investigated. Reactivity in the oxidation process was higher in mercerized cellulose than in native cellulose. The action of dilute solutions (10–15%) of N₂O₄ did not affect the degree of crystallinity of cellulose samples. Under these conditions, the oxidation took place mainly in amorphous regions and on the surface of crystallites. Oxidation in a concentrated (40%) N₂O₄ solution led to the destruction of crystallites, which increased the surface area and swelling of cellulose in water. The surface area and the swelling of OC samples increased with a decrease in the index of crystallinity. The acidic properties of OC were shown to increase with an increase of swelling in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4785–4791, 2004     

A novel specimen for investigating the mechanical behavior of elastomers under multiaxial loading conditions

In this paper we describe the design and manufacture of an axial-torsion test specimen, and provide relationships needed when conducting stress-strain characterization experiments with the specimen. The specimen is a short hollow cylinder of rubber bonded between two steel mounting rings, in which simultaneous axial and shear strains are produced via independently controlled axial and twist displacements. We present calculations for the strain-displacement and stress-load relationships, and strain energy density. These relationships have been established and validated via a combination of analytical and experimental techniques, and finite element analysis. We have investigated the extent and effects of strain and stress field non-uniformity in the test specimen. The specimen design is sufficiently simple that a closed-form expression for the strain-displacement relationship has been successfully developed.     

Thermal decomposition of a generation 4.5 PAMAM dendrimer platinum drug conjugate

A nanoscale multivalent platinum drug based on a poly(amidoamine) [PAMAM] dendrimer (generation 4.5, carboxylate surface) has been synthesized and fully characterized using a variety of spectroscopic, chromatographic and thermal methods. Treatment of the dendrimer with an aqueous solution containing an excess diaquo(cis-1,2-diaminocyclohexane)platinum(II) produces a conjugate containing approximately forty (diaminocyclohexane)platinum(II) moieties at the surface of the dendrimer. This material undergoes smooth two-stage thermal decomposition to provide residual platinum oxide reflecting the platinum loading in the drug.     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

Creep of composites with a porous fibre/matrix interface under variable loading

A micromechanical model of island-type fibre/matrix interface is described and experimental data are represented and analysed. Changes in the interface strength during a cycle loadings and, correspondingly, changes in the creep resistance of a composite due the island-like scheme of the fibre/matrix interface are described.     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

A 3D-BPP approach for optimising stowage plans and terminal productivity

This paper addresses the problem of determining stowage plans for containers in a ship, that is the so-called master bay plan problem (MBPP).     

抗肿瘤药物氮三乙酰肼和金属离子配位能力的研究

本文研究了抗癌药物氮三乙酰肼(Nitrilotriacetic hydrizide,NTH)和生命必需元素以及Al~(3 ),Ga~(3 ),In~(3 )的配位能力并用pH电位法测定了它们在生理条件下(37℃,Ⅰ=150mM dm~(-3)NaCl)的配合物生成常数。电位滴定数据是用ZPLOT,MINIQUAD,ESTA等计算机程序处理的。实验结果表明NTH与它的非生理活性的母体化合物氮三乙酸相比较,对Zn~(2 ),Mn~(2 )等过渡元素的配位能力表现较大的差异性。这种情况在Revercan,ICRF-198,ICRF-236和5-烯去甲基斑蝥酸等其他抗肿瘤活性化合物中也曾观察到。 NTH与三价金属Fe~(3 ),Ga~(3 ),Al(3 )和In~(3 )等有较大的配位能力,这与它的烯醇式结构有关。由于这些配合物在广泛的pH范围内生成,以及它的高稳定性,因此有可能被用作为肿瘤定位试剂或生物体营养元素铁传输的有效载体。     

温度及pH敏感的树枝状高分子衍生物合成及药物控制释放研究

对合成的系列聚酰胺-胺型(PAMAM)树枝状高分子进行端基的羟基化和氯乙酰化两步修饰,使PAMAM最外层接上烷基氯.以修饰产物为引发剂,通过原子转移自由基引发甲基丙烯酸N,N-二甲氨基乙酯(DMAEMA)聚合得到树枝状PAMAM高分子衍生物,并对其结构用FTIR、1H-NMR和粒径分析进行了表征.紫外可见分光光度仪测定证实此高分子具有温度及pH敏感性.通过对小分子药物控制释放研究表明,此树枝状高分子衍生物通过环境pH值可有效地控制小分子药物的释放.