Carbon Sphere@Nickel sulfide core-shell nanocomposite for high performance supercapacitor application

The Carbon sphere@Nickel sulfide core-shell nanocomposites for different mole ratios of Carbon sphere (0:1; 0.5:1 and 1:1) have been synthesized by a facile low temperature water-bath method without any further calcination. XRD studies on the core-shell nanocomposites show that characteristic peaks associated with rhombohedral phase structure of nickel sulfide have been retained. TEM morphology presents the interlinked core-shell of Carbon sphere@Nickel sulfide composite with grass-leaf dexterity for better ionic diffusion. BET study confirms the formation of mesoporous structure with high surface area. The existence of elements and its electronic configuration is noted through XPS. The electrochemical studies on pristine nickel sulfide and its Carbon sphere@Nickel sulfide core-shell composites reveal that Carbon sphere@Nickel sulfide (0.5:1) exhibits high specific capacitance of 1022?F?g^?1 at a current density of 1?A?g^?1. It shows good cyclic performance even beyond 4000 consecutive charge/discharge cycles at a relatively high current density of 20?A?g^?1 with the ～83% of retention.     

Two-Dimensional Layered Metallic VSe2/SWCNTs/rGO Based Ternary Hybrid Materials for High Performance Energy Storage Applications

In this work, the ternary hybrid structure VSe₂/SWCNTs/rGO is reported for supercapacitor applications. The ternary composite exhibits a high specific capacitance of 450 F g⁻¹ in a symmetric cell configuration, with maximum energy density of 131.4 Wh kg⁻¹ and power density of 27.49 kW kg⁻¹. The ternary hybrid also shows a cyclic stability of 91 % after 5000 cycles. Extensive density functional theory (DFT) simulations on the structure as well as on the electronic properties of the binary hybrid structure VSe₂/SWCNTs and the ternary hybrid structure VSe₂/SWCNTs/rGO have been carried out. Due to a synergic effect, there are enhanced density of states near the Fermi level and higher quantum capacitance for the hybrid ternary structure compared to VSe₂/SWCNTs, leading to higher energy and power density for VSe₂/SWCNTs/rGO, supporting our experimental observation. Computed diffusion energy barrier of electrolyte ions (K⁺) predicts that ions move faster in the ternary structure, providing higher charge storage performance.     

Stripped Charge of Ag Less than Deposited one Owing to Negative Capacitance Caused by Redox Reactions

Anodic stripping voltammetry was made in AgNO₃ solution, here Ag was deposited under long term potentiostatic conditions to evaluate the reduction charge, q_r, and then was stripped by linear sweep voltammetry to determine the oxidation charge, q_o. The charges were unbalanced, satisfying ca. q_o=0.7|q_r|, where other possible reduction charge such as by dioxygen and dichlorosilver were subtracted. The 30 % loss of the anodic charge can be ascribed to the negative capacitance by the potential sweep generation of Ag⁺. The generated Ag⁺ forms a dipole with a counter ion, of which orientation is the same as the direction of the externally applied electric field and opposite to the dipoles of solvent. The redox dipole decreases the conventional double layer capacitance caused by solvent dipoles, and high concentrations of Ag⁺ takes the capacitance to be negative values. The unbalanced charge, however, has no influence on quantitative determination of concentrations Ag⁺ by use of a calibration line.     

Dielectric and elastic properties of fluorine-containing tricyclic isothiocyanate liquid crystal

The dielectric and elastic properties of liquid crystals (LCs) generally depend on the molecule structure, such as polar group and carbon chain length. For further investigation of the influence of molecular structure on the dielectric and elastic properties of fluorine-containing tricyclic isothiocyanate LC, the experimental temperature was controlled at 25°C by precision hot stage, and a precision LCR meter was used to measure the capacitance of six LC cells under the voltage from 0.1 to 20 V at 1 kHz. An LC cell capacitance model and a dual-cell model were adopted to obtain the dielectric anisotropy, and the capacitance–voltage curves of six LC materials were plotted. The threshold voltage of Fréedericksz transition was analysed, and a finite difference iterative method was used to attain specific values of three elastic constants. The influence of molecular structure on the dielectric and elastic constants was finally analysed. Experimental results showed that the introduction of meta-difluoro group would increase the dielectric anisotropy and reduce the threshold voltage of LC. As the length of the alkyl carbon chain increased, the dielectric anisotropy would have an odd–even alternation effect, which would lead to changes in the elastic constants of LC.     

Surface charging behaviors of electrocatalytic interfaces with partially charged chemisorbates

The surface charge is a key concept in electrochemistry. Mathematically, the surface charge is obtained from a spatial integration of the volume charge along a particular direction. Ambiguities thus arise in choosing the starting and ending points of the integration. As for electrocatalytic interfaces, the presence of chemisorbates further complicates the situation. In this minireview, I adopt a definition of the surface charge within a continuum picture of the electric double layer. I will introduce surface charging behaviors of firstly ordinary electrochemical interfaces and then electrocatalytic interfaces featuring partially charged chemisorbates. Particularly, the origin of nonmonotonic surface charging behaviors of electrocatalytic interfaces is explained using a primitive model. Finally, a brief account of previous studies on the nonmonotonic surface charging behavior is presented, as a subline of the spectacular history of electric double layer.     

Impedance Response of a Thin Film on an Electrode: Deciphering the Influence of the Double Layer Capacitance

The different contributions of the interfacial capacitance are identified in the case of passive materials or thin protective coatings deposited on the electrode surface. The method is based on a graphical analysis of the EIS results to determine both the passive-film capacitance in the high-frequency domain and the double-layer capacitance in the low-frequency domain. The proposed analysis is shown to be independent of the physicochemical origins of the frequency dispersion of the interfacial capacitances which results, from an analysis point of view of the experimental results, in the use of a constant-phase element However, for a correct evaluation of the thin-film properties such as its thickness, the high-frequency data must be corrected for the double-layer contribution. In particular, it is shown that if the double-layer capacitance gives a frequency-dispersed response, it is necessary to correct the high-frequency part for the double-layer constant-phase elements. This is first demonstrated on synthetic data and then used for the determination of the thickness of thin oxide film formed on Al in neutral pH solution.     

Void‐Assisted Ion‐Paired Proton Transfer at Water–Ionic Liquid Interfaces

At the water–trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P_14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H⁺) and deuterium ions (D⁺) was identified. Alkali metal cations (such as Li⁺, Na⁺, K⁺) did not undergo this transfer. H⁺/D⁺ transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP]^?, resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton‐coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.     

Synthesis,characterization and electrochemical investigation on Nickel Manganese Oxide - Polybutylene Sebacate composite electrode of biodegradable nature for micro capacitor applications

Synthesis, characterization, surface morphology and electrochemical properties of non-stochiometric Nickel–Manganese oxide nanoparticles were carried out by urea assisted sol gel method. The Ni_1-xMn_xO (0.15≤ X ≤ 0.50) nanoparticle synthesized was found to be cubic and the existence of Mn₃O₄ and MnO₂ phases were established and confirmed by X-ray Diffraction (XRD) studies. Thermo Gravimetric-Differential Thermal Analysis (TG-DTA) studies provided the calcination temperature of the xerogel at 600 °C, wherein the lattice strain and the size of the nanoparticles were determined through Williamson Hall (WH) Plot. The surface morphology characteristics of these nanoclusters were authenticated by Scanning Electron Microscope (SEM) techniques. Further, electroanalytical techniques were employed as a tool in establishing the nanocomposite as an intriguing material to act as a capacitor at enhanced efficiency compared to that of conventional capacitors. The electrochemical competence of the electrode was established through cyclic voltammogram, (CV) and Electrochemical Impedance Spectral (EIS) studies. The values of capacitance for Ni_1-xMn_xO, (0.15≤ X ≤ 0.5) nanoparticles varied from 7000 to 8000 mFg^?1, measured at 20 mVs^?1scan rate in 1.0 M Na₂SO₄and the temperature dependent conductance property for Ni_0.85Mn_0.15O electrode verified the Arrhenius Equation. The synthesis of a biodegradable polymer, Poly Butylene Sebacate (PBS) employed as conducting polymer for ultra capacitor applications is comparatively superior and definitely provides an edge over other capacitors in existence which is predominanantly attributed to its biodegradability nature. Further, the specific capacitance of PBS- Ni_0.85Mn_0.15O composite electrode was found to be 5180 mFg^?1 which clearly illustrates that these composites are potential candidates of the type biodegradable supercapacitors that are evolving transient sources of power in the future and the biodegradability of the polymer-metal oxide composite electrode fetches more significance in terms of disposal of electronic and electrical wares.     

Substrate effect on the electrochemical capacity pattern (ECP) of PbS

Different metals (Zn, Cu, Pb) were electrodeposited on indium tin oxide (ITO/metal). ITO/metal was used as a substrate for ZnO and PbS deposition, and finally the PbS surface was encapsulated with ZnS. The electrochemical capacitance, C_EC, of each thin layer was calculated from the cyclic voltammetry data and plotted against the applied potential. The plots showed different electrochemical capacity pattern (ECP) for PbS with different metal substrates. It seems that these patterns are effectively controlled by the ECP of the metal substrates. Also, the PbS C_EC values were calculated from electrochemical impedance spectroscopy, EIS, to be compared with PbS C_EC values obtained from cyclic voltammetry. The results of this comparison were completely consistent with each other and confirm different metal as a substrate effects on the PbS and may lead to a structure with different ECP. In the X-ray diffraction pattern, the presence of different preferential orientation of metal crystals was confirmed, which have been leaded to the formation of PbS deposits with different ECP.     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。